top mounting

... grommeted on one side (top) with a grommet spacing of 250 - 300 mm. Upon request, multiple sides can also be grommeted, up to all sides with a specific grommet spacing. Brass Grommets: DIN 10, DIN 16 (standard), DIN 20, DIN 25 Stainless Steel Grommets: DIN 12, DIN 16, DIN 20, DIN 25, DIN 40 Areas of Application As workplace shielding during grinding and welding operations In shipping, power plant, and...

... steel S235JR. Working pressure: 6 bars. Operating temperature range: 7°C – 95°C Designs – From 2 to 8 connections to be linked to the installations. The connections are at 180 °C. Connections at the top and bottom. Installation – The 30 and 50-liter models are intended for wall mounting, while the 100-liter model can be mounted on the wall or the floor. Additionally, there are extra feet that are mounted on the bottom.

... internal components of the lid. It already includes a cavity for housing membrane keypads, front plates, or for the installation of control panels. On the back, the screw channels will be covered with closure caps that will also serve as edge protection. There are numerous mounting domes on the top and bottom for the installation of the intended internal components. Mounting plates, compatible cable fittings, and additional accessories are also available. EN AC-44300 DIN EN 1706: Aluminum...

... their size. The flexible electric drives feature a multi-voltage system and are compatible with voltages of 24V-230V-240V AC/DC (50/60 Hz). The electric swivel drives are designed for mounting on valves with ISO5211/DIN3337 top flanges. The shaft connection is available in standard square or double flat variants, making it suitable for many shaft configurations. Voltage: Multi-voltage system, 24V...

... the temperature is too high, the brake pads start gassing on top of that. Measurement point:VA-wafers Ø 7.0 mm, 1 mm thick Housing:Ceramic, Ø 8.0 x 25 mm Line length:1,000 mm, 2,000 mm or 3,000 mm Line type:FEP-Teflon, AWG24F, open strands Temperature range of the line:up to 205 °C in continuous duty, 230 °C peak Connection:free ends, mini-plug, mini-plug self-locking, analogue 0–5 V (THK)...

... fabric at the bottom, aluminum-coated fiberglass fabric at the top (heat protection). Robust protective element reinforced on both sides with steel, brass, or aluminum lamellas. High resistance to oil, grease, coolants, and hot chips (contact heat up to +300°C) Splash and spray water resistant according to IP 54 Small roll-off radius - Low space requirement Easy installation Mounting possible with brackets, hinges, or other fasteners.

...Hazardous area „L" immersion heater ATEX EEx e + EEx d T1 – T6 The “ISES-L” and “FP/BFP-L” series of hazardous area immersion heaters are ideally suited for installation within process tanks, sited in zone 1 or 2 hazardous areas. The design of the heater provides horizontal mounting of the elements, beneficial for low liquid level applications but allowing vertical installation which facilitates withdrawal from the vessel top. This design of heater is particularly for heating for heating the contents of underground storage tanks.

...Height: approx. 700 mm. Casing and flexible arm chromium plated. Supplied with 250W-infra-red radiator (white light). With screwed connection for mounting in top covers (max. thickness 30 mm). Without plug and switch. Cable length: 2000 mm.

...Label holder to hold labels, scanner-compatible different versions: — for magnetic mounting on metallic surfaces, e.g. shelves — for adhesion on shelves, removable without leaving any residue, reusable on supporting surfaces thanks to multi-use propertie — Side and top open — Top and right side open for quick label change, tear-resistant and stretchable transparent foil with restoring...

... mounting kit: yes Recommended dimensions for rectangular top: 70x70 cm Recommended dimensions for round top: 70 cm Outdoor use: yes Floor protection: yes Assembly required: yes, self-assembly with instructions Package 1/2: 43x43x5 cm Package 2/2: 72x9x9 cm Weight of package 1: 13.42 Kg Weight of package 2: 3.3 Kg...

... iron design protection class IP55 (higher up to IP65 available upon request) thermal class F with thermal reserve (H optional) connection boxes up to BG 315 available optionally on top, right, and left extensive modifiability optional with built-in incremental encoder (necessary for speed feedback) optional with additional external fan cover (useful in operation at low speed) optional in explosion-proof design...

...Simple ceiling construction – applicable in rooms of maximal width of 4 meters and maximal area op to 16m2. For bigger areas, two-layered construction should be applied. Partition walls made with the application of CW and UW profiles are so-called light steel framing constructions. Top hat profiles are used for direct assembly of plasterboards: - when making ceiling or wall coverings with a small mounting height or width - used in places requiring a minimal thickness of the lining - the possibility of direct assembly to concrete walls, wooden ceilings...

...two height-adjustable mounting rails for the installation of fittings a bottle holder with four retaining straps smoothly operating foldable loading ramp including labeling with warning symbol External dimensions (WxDxH): 1395 x 610 x 2070...

... with a varnish coating. This makes the product even more resistant to aggressive weather conditions and reduces the deposition of dirt. The model can be anchored to the flooring. A stainless-steel ring bolt is placed at the top of the concrete cone. It is used for easy installation and for mounting a connecting rope or chain between the restraints as needed. A product that is timeless. These characteristics guarantee durability and long service life. The size and shape of the concrete antiparking body allow different options for stacking and combining. ...

... are available. With the variety of wavelengths as well as the exchangeable optics, you remain particularly flexible and can upgrade and change over at any time. For controlling the UV-LED Spot P, we offer the LedControl S as a table top device or the LedControl DC for DIN rail mounting. With the LedControl S and DC UV LED controllers, the ultraviolet LED output can be set between 2% and 100%. Wavelength:365, 385, 395, 405 o. 450 nm Dimensions, Spot P:Ø 15 x 143 mm Dimensions, Spot P short:Ø 15 x 60 mm Cable length:1,5 m Weight:~130 g...

...quick and easy installation without locknut in tight spaces for flexible cables - The PERFECT Fix cable gland is the perfect cable entry solution for the installation in areas with limited space. Features: — easy mounting and dismounting from one side — no inner (female) thread required — locknut on the inner side obsolete — quick and easy installation without special tools — advantageous...

... for motors The ball screw drive is reversible, and the axial accuracy of these tables is <0.07 mm. The maximum achievable stroke is 400 mm, and any non-standard intermediate stroke can be achieved. In the XY cross table design, the tables are mounted directly on top of each other through the housing, with smooth holes introduced into the table body for option 308922*. For less precise positioning applications, these tables are available with trapezoidal screw drive.

...Due to the space-saving enclosures and the high protection class the position switches of the M49 series are perfect for an installation where a flat design and a high protection class of IP67 is required. — Flat and compact design — Pre-installed connecting cable (1m length) for quick and easy installation — Top-mounting versions available — Cable outlet on the side or at the bottom — High protection class IP67 — Suitable for safety applications according to DIN EN 60947-5-1 (positive break) — Different cable lengths available on request Protection class:IP67 Material:Metal...

...The X Tower System consists of 4-meter high sections. The profile width ranges from 750 mm to 4350 mm. The straight sections at the top of the tower are suitable for mounting antennas. X-TOWER SYSTEM Consists of 4-meter high sections. The profile width ranges from 750 mm to 4350 mm. The straight sections at the top of the tower are suitable for mounting antennas. FLEXIBILITY The X Tower is...

... the table to vibrate. Specific vibrations of the table cause the desired effect in the form of shaking and compaction of the material placed in the molds. The dimensions and method of mounting the molds on the countertop are selected depending on the customer’s requirements and the specificity of the process.

...Supports flexible positioning and all-round mounting at the baying point. Side mounting creates a flush surface, suitable for top mounting.

...Our top box has a capacity of 24 liters and can hold a helmet, some clothes or accessories. This case is made of high quality PP, which makes it waterproof and weather resistant. With the quick-release system, the rear luggage can be easily removed. Thanks to the built-in reflector, your visibility and safety are greatly improved. Colour black. Material: PP. Dimensions: 41.5 x 37 x 31.5 cm (W x D x H). Content: 24 L. Weight: 3.3 kg. Water resistant. With built-in reflector. Delivery includes mounting accessories and 2 keys.

...The RPU296P from RPTOOLS is an electro-hydraulic truck tire mounting machine with hydraulically movable mounting slides, designed for top-notch professional quality. It is ideally suited for both professionals and small workshops. The new model has undergone extensive testing over several years, during which its quality and performance have been continuously improved. With this machine, it is also easily possible to mount tires for buses, construction vehicles, and agricultural equipment. For a limited time, you can purchase this machine at an attractive introductory price.

...Snap switch - Changeover switch with double interruption, shape Za. The S814 snap switch is a versatile microswitch for medium and small power applications. The special feature is the plunger, which moves from top to bottom through the housing when activated. This allows two S814 switches to be mounted one above the other, enabling two switching operations to be triggered with a single actuation. The S814 is equipped with self-cleaning contacts.

...Material: Aluminum Length: 1,000 mm Features: with wings; for recessed wall and floor mounting, tie-down straps and end fittings Suitable for floor and wall mounting. For hanging airline fittings, anchor points, as well as with end fittings. Tie-down straps can be directly hung with the corresponding end fittings. Article number: 1026.0083 Features: with wings; for recessed wall and floor mounting, tie-down straps and end fittings Length: 1,000 mm...

...Weight: 0,16 kg Height: 9,6 cm Width: 5,8 cm Material: 12 mm 18079:Post Top...

...One-phase connection (frequency) - 2 configurable analog outputs linear or kinked in a range from 0/4…20 mA, 0/2…10 V - Quick on-site programming using push buttons or via CB-Configurator software - Simple on-site device operation - Clear and well readable representation of measured data via LCD display - Flexible communication and remote readout via integrated Modbus RTU interface - DIN rail for top-hat rail mounting...

...Stainless steel post, height 890 mm, to be drilled and assembled by yourself, designed to receive a fixed or adjustable handrail support. Post to be fixed on top. Reference: 3170.0100.4021 Diameter: 42.4 mm Section: Round Mounting method: Top Mounting plate: Flat Installation: On the ground (French style) on terrace, balcony, mezzanine, staircase... Height: 890 mm Manufacturer: Erminox Place of manufacture: France Brand: Erminox...

...The plug & play principle ensures that the fabric can be attached to the top roller much faster than traditional systems. With one simple motion, the profile clicks into place.

... the bottom of the shell - 3 single male DIN 80 connections on the dome - Double-acting valve ELICA 1000 HL in stainless steel 316L with trumpet mounting - 5 lifting rings, 1 of which is at the base of the tank - Support + manufacturer's label - 1 single male DIN 65 threaded connection - 1 single male DIN 65 threaded connection - Weight: 928 kg DIMENSIONS - Diameter: 2470 mm - Height: 5525 mm...