tension elements

... CTI 600 and additional V0 equipment are available. With fiberglass connection elements, steel tension rod systems can often be replaced. With approximately the same mechanical strength, fiberglass reinforced threaded rods are lighter and also corrosion-resistant. Due to their temperature resistance, the DuroBest® threaded rods comply with heat class H. Advantages/Properties - High electrical...

... intended for securing the tarp. To install it securely, you will find eyelets at each end, through which you can thread bungee cord while connecting the tarp to the structure. It is important to note that umbrella tarps are inseparable from certain products to be properly installed. These elements include: straps, strap ratchets, and bungee cord. This tarp is suitable for projects lasting over 12 months and adapts to all types of umbrella systems. Material: PVC Weight: 650g/m² Dimensions: 1.5m x free, 2.5m x free, 2m x free, 3m x free Color: White, Gray...

... diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N...

... storage of gas cylinders according to TRG 280 (Technical Rules for Gases) Construction: galvanized Walls and roof elements made of galvanized steel sheet, snow load safety 210 kg/m² Grid floor area, load capacity 500 kg/m² Ground clearance through spacers for ground ventilation and forklift transport Hold-down brackets and tension straps secure the gas cylinders against tipping 4 lifting eyes for...

...film, and tape tension control. Mounted on test benches, TPB Series - Torque Powder Brakes allow performance and reliability testing on driving elements such as electric motors, hand-held power tools, geared motors, reduction gears, and hydraulic transmission systems. Other applications include load simulation for life testing on electric motors, actuators, gearboxes, power steering, and many other rotating devices and assemblies. Available torque ratings:12, 25, 50, 100, 200, 400, 600N·m Braking power:up to 900W (2100W with air cooling) Rated torque available from:0rpm...

...With the same timing belt, but equipped with different profiles, various goods can be transported within a transport system as needed. The BRECO ATN timing belt is part of a modular system that includes timing belts, fastening elements, the ATN timing belt lock, and cams/profiles. Material: Polyurethane Material TPUFD1: for food contact, FDA compliant, stainless steel tension carrier Material...

...Radial tension nuts in the range of M14x1.5 to M200x3 We manufacture high-precision adjustment nuts with radially arranged clamping elements in the range of M14x1.5 to M200x3.

...Motor housings, motor flanges, winding spools, carriers, pump/valve housings, tension rings, tension flanges, sensor caps, blow-off nozzles Our experienced team is eager to turn your needs for flow-formed products into reality. Please get in touch with us as early as possible, ideally during the design phase, so that your products can be implemented economically and without costly 'tolerance fears.'...

... - including standard clips and clamps, as well as project-specific stamped and bent parts, flat springs, wire bent parts, and compression, tension, torsion, and micro springs. Surface finishes such as hydrogen-free galvanizing, nickel plating, chromating, or copper plating can be realized upon request. CTX typically develops application-specific solutions step by step in collaboration with the user.

...LinClamp clamping and braking systems are used to brake and hold moving masses in the axial direction on linear guide rails and linear guide elements.

... (506 x 281 x 308) mm (W x H x D) Connection media 230 VAC, < 1.2 A Optional accessories Auxiliary device for zero point adjustment of the force measurement technology (tension, compression) Dimensions: (506 x 720 x 365) mm (W x H x D) with EPS...

... maximum projection is up to 1500 mm (with 25.52 mm SentryGlas®). - Easy installation and concealed mounting - Load capacity of up to 2 kN/m2 - Profile width up to 5000 mm - For glass thicknesses of 17.52 mm, 21.52 mm, and 25.52 mm SentryGlas® (available as an option) - Max. 1500 mm projection (with 25.52 mm SentryGlas®) - No tension rods required - Glass inclination adjustable afterwards - Multiple wall profiles can be mounted in series...

... are also happy to assist in selecting and sizing a suitable clamping set solution for you. Areas of application: - Fastening of drive elements - Shaft-hub connections in general - Heavy-duty applications...

...Drill chucks, machine vises, collets, inductive shrink systems, quick-change tapping chucks, tool assembly devices, Captis collet Clamping tools: Reduction and extension sleeves Clamping sleeves Knock-out pins, taper pins Drilling and tapping chucks Centering points, drivers Tool holders for lathes Workpiece clamping Turning and grinding spindles, clamping spindles Lathe chucks, tool holders for lathes Tapping chucks Tool holders Shrink devices Pre-setting devices Magnetic and vacuum clamping systems Sub-devices Slide guides Mechanical clamping elements...

... made of hardened tool steel\n\nWichtige Hinweise\nDue to the lateral forces that occur when clamping with wedge clamping elements, tools must be secured against shifting, for example, by using positioning pins or stop elements.\nThe elements must..."}...

...Whether milling (coarse and fine machining), drilling, sawing, welding, or assembly, the EPM modules or modular systems offer a wide range of clamping options, for example, for clamping during edge milling or deburring (without mechanical clamping devices) or for the simple and quick fixation of workpieces during assembly. With the Doublemag magnetic clamping elements, workpieces can be easily...

...Mechanical clamping elements for clamping and securing tools on press tables and plungers High clamping forces, ease of use, compact design, and low acquisition costs are the main focus here. Insertion clamping elements | Clamping heads | Clamping screws | Clamping nuts Clamping forces: from 15 to 200 kN T-slots: 14, 18, 22, 28, 36, and 42 mm Max. tightening torque: 45 - 140 Nm With and without clamping force control...

...Insect protection frame, weather-resistant aluminum frame with fly screen fabric for hanging on windows or doors without drilling. Custom-made to measure. Insect Protection Frame The tension frame - a custom-fit insect protection frame with nearly invisible fly screen fabric. The fly screen frame is made to fit the window or door and is hung on the window frame using stainless steel brackets...

...Tension Spring and Spiral Spring with Retaining Bracket The tension spring and spiral spring with retaining bracket made of stainless steel allow for various inclinations and curves of the holding devices, while also serving as kink protection, for example when used with handguns.

... tension distribution and protection against neck injuries -Two lightweight D-rings for securely attaching a leash – Reflective elements on the neck and legs for additional safety in darkness – Available in 7 sizes and 13 colors, from 24cm (9.44in) to 54cm (21.25in)Chest circumference – Every Harness has macth color leashes. Sold separately – Suitable between 1,5kgs- 16kgs for all dogs – Handwash only...

... mounted on the structure of the trailer or truck, and the tarp is equipped with grommets or loops that attach to the pulley with the bungee cord. When pulling or moving the tarp, the pulley ensures smoother guidance and easier handling. Pulleys also allow for stretching the bungee cord to tension the tarp. Reference: PP000S001...

... dust extraction properties through blow-off device and chip guide within the saw - Clamping of the pivoting or longitudinal movement via pneumatic clamping elements from Zimmer - Counter support in the saw table ensures optimal stability and precision - All drives and controls from Jetter - IP 65 protected 15-inch industrial touch panel - WEGOMA proprietary software customizable to customer needs - Decades-proven combined tension especially for wooden glass strips...

W&F is a medium-sized, owner-managed company. Since its founding in 1991, the product range of clamping tools for milling technology has been continuously expanded. Today, we offer nearly every tool in up to 5 different lengths as standard from stock, making us one of the market leaders. Innovation, sensitivity, quick responsiveness, and consistently high product quality are what W&F stands for. F...

Development and manufacturing of reliable components for mechanical engineering. As well as customized solutions for automation, streamlining, and production optimization.

When it comes to fixture construction, assembly manufacturing, or precision parts production, we are your competent partner. A modern machine park, always kept up to date with the latest technology, a perfectly optimized workflow, and long-standing, experienced, and highly qualified employees enable a flexible production oriented towards the requirements of our customers. Thus, we place great impo...

Since the early 90s, we have been successfully supplying various industries with specialized automatic turned parts according to specific customer geometries and specifications. The product portfolio ranges from simple to complex automatic turned parts, as well as sheet metal processing parts and sheet metal stamped parts. The turned parts are manufactured on a wide range of machinery, allowing us...

In recent years, the market for electronic and hydraulic components has changed significantly. Due to different requirements or simply a different perspective, international companies have developed innovative components for clamping, drive, and control technology. This enables designers to find new approaches to problem-solving in their applications. The EHC offering includes hydraulic component...