pumps vertical

...GAP pumps are single-stage submersible pumps designed for repeated operation with a vertical discharge outlet. These pumps are intended for general applications to pump slightly contaminated water. They are available from 0.37 to 2.2 kW, with or without a float switch for single-phase as well as three-phase power supply. All pumps feature a double mechanical shaft seal. These pumps are equipped with an automatic thermal overload protector that resets to prevent pump burnout.

...Vertical or horizontal compressed air storage tanks and reservoirs made of carbon or stainless still with a maximum with a capacity between 150l and 160 000l. The maximum working pressure depends on customers specifications and it ranges from 8 bar to 40 bar. The vessels are equipped with drain ports on the bottom to remove condensation and can be supplied with mounting plate to secure motors, pumps and other components.

...Stainless Steel Configuration:: Vertical Construction Materials:: 316 Stainless Steel O-ring Materials:: FKM, EPDM, Buna, or PTFE Encapsulated Silicone Lower Bushing Materials:: Carbon, FKM/SS, or EPDM/SS Column Lengths:: 12 in (30 cm), 24 in (61 cm), or 36 in (91.4 cm) Maximum Temperature:: 300º F (149º C)...

...Vertical submersible pump Flow H Max kW 3 to 30 2 to 11 0.37 to 2.20 mc/h m kW Execution Vertical electric pumps with an open-air motor and pump body submerged in the liquid to be transported (without suction piping and foot valve). Impeller VAL: vortex impeller. SC: open impeller. Ports VAL 30, SC 30, SC 50: ISO 228 threaded port. VAL 65C: flange with threaded counter-flange, oval, flat UNI 2245, PN 2.5. Uses For lifting from tanks or pits with civil and industrial wastewater. For slightly loaded waters, for liquids without abrasive particles that are non-aggressive to the pump materials.

...Vertical pumps for transferring drums...

...Vertical, leak-free magnetic coupling pump with ETFE coating The vertical inline pumps KV from ANSIMAG operate with a seal-less, leak-free magnetic coupling and are used in processes where corrosive media are pumped. With connections according to ISO standards, the vertical inline pumps can be easily integrated into existing systems. The KV magnetic coupling pumps from ANSIMAG are fully lined with ETFE and are utilized due to their excellent resistance to acids and bases in the production of specialty chemicals and steel manufacturing.

INGESHOP, a supplier of equipment for environmental protection, goods, and people, is the e-commerce store of INGETECH, a technical studies office specializing in water management and treatment on ICPE sites for all professional sectors. The products offered have been selected after approval and validation of their effectiveness for their intended uses. Discover our tanks and reservoirs for rainwa...

... Gearbox with forced lubrication and oil cooling gear ratios i = 3.30 - 3.95 - 4.66 - 5.63 Also available to API 674, including vertical operation Special fluids such as seawater, glycol, methan Pressure:max. 3500 bar Flow:max. 1913 l/min Power input:max. 550 kW Weight:2200 kg...

... metal cabinet with a door (ARM), or in a vertical configuration (VF) for coupling to a polyethylene tank. Motor characteristics: Voltage: 220 V AC 50 Hz Consumption: 6 A Power: 750 W RPM: 1400 Stop switch Air cooling fan with protective shroud Pump characteristics: Self-priming Metal mesh pre-filter at suction 1" inlet and outlet threads Recirculation valve (By-Pass) Maximum suction height: 2.5 m...

...Pit rolling drip tray with a capacity of 95 liters. Rolling drip tray for installation between pit rails with a minimum/maximum width of 1,040 / 1,450 mm. Capacity of 95 liters (25 US gallons). The unit is equipped with a splash guard, four vertical and four horizontal rollers for easy maneuvering, and a 1-1/4" outlet with a ball valve. A hydraulic connector can be attached to the unit for unloading with a drainage pump set. Reservoir capacity: 95 l (25 gal) Liquids: Used oil...

...The ECO SNM close coupled, end suction, single stage horizontal centrifugal pump is standardised to DIN 24255 / EN 733 and can be used for a vast range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. If required, this pump is available in a vertical version known...

... be rotated by 235° VM: with three-phased motor that can be overloaded 11.0 / 15.0 / 18.5 / 22.0 kW with conveying capacity up to 6,000 l/min VG: with EISELE angular gear for tractor drive und conveying capacity up to 12,000 l/min Eisele vertical pumps have proved themselves thousands of times and are superior in quality and performance. Many different application possibilities can be perceived with the high-performance pumps.

...The vertical centrifugal pumps of the "VP" series, for "Vertical Plastic", or VCP, for "Short Vertical Plastic", are constructed from plastic materials (PP, PE, SOMEDUR, UHMW-PE, PVDF...), machined from solid or transformed from blanks according to plans, and are primarily intended for harsh industries and continuous service. Available in standard or vortex versions, they are fully "customizable...

... up to 90℃ Construction & Features Compact vertical centrifugal multi-stage design with perfect standardization and generalization, easy operation and convenient maintenance. A complete electric submersible pump includes a water pump set, electric motor, a discharge piping, water-proof cable and a control panel. Submersible motor filled with clean water for cooling and lubrication. And the pressure regulation switch, located at the bottom of motor, shall automatically operate to balance the pressure fluctuation caused by temperature variations.

...Design and Technical Specifications • The ARS-D series is designed for pumping non-abrasive liquids that do not contain large solid particles. • They are vertical axis stage bodies with separable closed impellers. • The connection between the pump and the motor is made via a coupling. • Sealing is achieved with a soft packing. • The balancing holes in the impellers minimize axial loads and...

...Stage centrifugal pumps of the series IN-VB(-S) are multi-stage vertical centrifugal pumps in IN-LINE design. The self-priming pumps are characterized by high efficiency.

...Stage centrifugal pumps of the series IN-VB(-S) are multi-stage vertical centrifugal pumps in IN-LINE design. The self-priming pumps are characterized by a high efficiency.

...Features * with mounting * rubber ring * filter * Performance: 40 to 50 l/min * Pressure: +/- 2kg/cm² * vertical overflow 15m...

... (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.) Water pump 50 liters/min - 0.75kW Transport Distance Horizontal * 40 meters (Standard – if needed this will be long - option) Transport Distance Vertical * 30 meters (Standard – if needed this will be long - option) Reservoir Volume 130 liters Maximum Weight 285 kg ...

...Variable Vertical Centrifugal Pump The HÄNYTEC®-KV pump is a variable centrifugal pump. The performance and design are tailored to the specific operating conditions. The robust spiral casing ensures high efficiency. The shaft is securely guided by ball and sliding bearings and is mechanically separated from the motor by a coupling. The advantages of the HÄNYTEC®-KV pump: • High efficiency • Low maintenance • Custom design • Standard components • Coupling revision in operational condition • Dry installation possible • Custom mounting plates and attachments...

...Our KYK HLZ model hot oil boilers are designed for use with fuels such as biomass, coal, pellets, and pomace, as well as liquid and gas fuels. They are produced in a helicoidal tube, vertical type. The system is supplied as a complete package, including all boiler room equipment and accessories such as circulation pumps, reserve and expansion tanks, deaerator, and chimney. It is equipped with an underfeed stoker system for solid fuels. Capacity Range: solid fuel 100,000 kcal/h - 3,750,000 kcal/h liquid/gas (oil/gas) 200,000 kcal/h - 7,500,000 kcal/h...

... available in a variety of configurations and can also be equipped with valve connection systems in sizes Cetop 2 + 3. By installing a three-phase motor, it is also possible to use it in industrial hydraulic applications. Drive powers: 2 / 3 and 4 kW Operating voltage: 12 / 24 / 48 VDC Gear pumps: from 0.8 to 5.7 cc/rev Tank made of transparent plastic: 0.8 – 1.5 liters Tank made of steel sheet: 1.5 – 12 liters Installation position: horizontal or vertical Permissible operating temperature: -10° to 80°...

...Ormaksan Makine has been established in 1994 to serve the machining industry in Izmir, Turkey. In our manufacturing facility, we process semi-finished parts for various sectors including automotive, containers, agricultural machinery, white goods, valves, pumps, and many more. We produce spare parts for many industries using our CNC lathe, CNC vertical machining, and CNC laser machines.

For 30 years, Pomac Lub-Services has been a well-oiled company thanks to its collaboration with globally recognized manufacturers in the field of lubrication techniques (from grease dispensers to automatic lubricators for oil and grease, everything for your compressed air network…). Our core business: automatic grease dispensers, lubrication of belts and platens, centralized greasing, chain lubric...

The company SCHMITT-Centrifugal Pumps has been one of the leading manufacturers of specialized industrial pumps for the transport of aggressive and pure media since its founding in 1964, with a performance range of flow rates up to 580 l/min [35 m³/h] and delivery heights up to 40 m. Quality, flexibility, and service competence are principles that have been fundamental to our work for 50 years.

... Equipment Directive 2014/68/EU according to the AD 2000 regulations, and are supplied with custom sieve inserts with a filtration fineness starting from 50 µm. The media inlet and outlet are positioned at opposite heights. They can be installed in horizontal and vertical pipelines. The industrial factory is a specialist dealer of Y-strainers from numerous manufacturers (e.g., KSB, ARI, Fromme, Samson...

... machine: mast extension (foldable or telescopic), SPT penetrometer, different mud or foam pumps, fixed or hydraulically tiltable rod rack. DRILLING SYSTEM – Direct circulation rotation. – Core destruction with water, mud, foam discharge. – Rotary drilling with down-the-hole hammer. – Coring. AUXILIARY ENGINE Max power 95 Hp (70 kW) DIESEL TANK Capacity 70 l (18.5 gal) MAST SLIDING: vertical...

... suitable for passive isolation of measuring and testing machines, individual building components, up to entire buildings (earthquake protection). Specifications Load capacity FCd per spring package: 0.07 kN to 20.11 kN Natural frequency ne vertical: 2.6 Hz to 4.2 Hz Isolation efficiency up to 90% Amplitude damping made of plastic or viscous mass Optional height leveling With and without preloading Additional Features The ISOFED steel compression spring program is characterized by its versatile modular system.

... components, for example, for pumps and compressors Work pieces made from tungsten carbide and other hard metals Fan wheels for turbo chargers (automotive industry) Sintered components, etc. Technology:Trowalizing, deburring, grinding, smoothing Applications:For mechanical engineering, aircraft industry, medical technology More features:Drag finishing machines for surface technology...

... renowned: Full Inverter technology, WiFi control, and LED indicators. Thanks to Full Inverter technology, the heat pump operates more steadily, staying close to the set temperature at all times, thus avoiding spikes and significantly reducing energy consumption. The Platinium Mini is a silent pump that can be proudly displayed in your outdoor space. Its vertical ventilation allows for the expulsion of stale air away from the surface it occupies, thus saving significant installation space.