glass parts

...Sight glass for the tank for wheel loader FERRUM. Will be delivered like shown. Item No:DM_Tank_Sight Glass...

...With over 35 years of experience, Mikropor manufactures the most efficient spare parts in the industry. Mikropor offers four layers of superior protection, ranging from 1 micron to 0.01 micron. Additionally, the highly efficient glass nanofibers (80 times thinner than cellulose fibers) provide greater targeted efficiency, a longer lifespan, and broad compatibility with chemicals and synthetic lubricants, even at extreme operating temperatures. The spare parts have been developed and tested in our state-of-the-art testing laboratories.

...Material: Thermoplastic PA (Polyamide), glass bead reinforced or PP (Polypropylene), glass fiber reinforced. Execution: Black-gray. Note: The mounting hole is designed so that the handle grips can be attached from the operating side using a cylinder screw or a hex nut. Installation: From the operating side or the back. On request: Other handle colors.

... example, in the injection molding process, parts can be removed from the molds or deposits can be avoided. The profitability of the production process can also be decisively improved: additives can minimize cycle times or reduce processing temperatures. We would like to inform you about the scope for optimising your production processes. Add more values. In addition, additives protect thermoplasts and generate additional properties. Thus antioxidants, both during the thermal forming process and in the application, enable the resistance of the polymer against destructive temperature...

... valve is closed again. For better control of the filling process, the bottles are illuminated with an LED lamp. With the Fillboy, glass bottles (ranging from 0.25l to 1l), siphons, and kegs (5l) can be filled. PET bottles are also available upon request. The filling speed can be continuously adjusted from 0.5 to 2l/min via a throttle. Approximately 80 bottles of 0.5l can be filled per hour.

...Body/Cabins/Glass Panels, 1908751 Year of Manufacture: 2007...

...The acrylic glass protective screen requires no screws or adhesives. The sneeze and cough guard is ready to use immediately and can later be removed without leaving any residue. This sneeze and cough guard made of acrylic glass comes completely without screws or adhesives. The sneeze guard is ready for immediate use and can later be removed without leaving any residue or can be reused if needed. Protect your visitors and customers as well as your staff with this protective screen against droplet infections. Shipping: UPS...

... furniture fronts or cladding for kitchens and living areas, for contract furniture and shop fitting. Impact-resistant due to surface bonding. LGA tested: safety. Available in 15 standard front colors: 9 colors with glossy glass surface, 1 color real glass mirror, 4 colors with satin glass surface, 1 color with satin finish leather texture. From 500 m², any desired front color is possible. Back side is standard white. Black available at an additional cost. Dimensions: 2,380 x 750 x 19 mm Maximum 250 x 40 x 19 mm Minimum...

...Glass syringes are continuously supplied and placed on a conveyor belt with a capacity of 400 pieces/min.

... – monolithic machined parts - perfectly recyclable at the end of the long lifecycle - top-quality surfaces of all qualities and material types achievable - all shades and colors - unlimited UV stability - CO2 neutral - Plexiglass...

...Direct development with glass, carbon, or basalt fiber Temperature resistance standard up to 140°C (180°C also possible) Tensile strength up to 250 MPa Surface processed or unprocessed according to customer requirements...

...We specialize in the manufacturing of complex measuring sensor blocks made from acrylic glass (including PMMA, Plexiglas®). Our particular expertise lies in the production of crystal-clear, high-precision drill holes.

... color reproduction was to be as neutral as possible. The result was a 3-part laminated safety glass (VSG), consisting of - a thermally shaped Antiqua outer pane as single-pane safety glass (ESG) with a sun protection layer, - a middle ESG with a thermal insulation layer, and - an inner laminated safety glass with UV protection. So far, Sollingglas has produced 950 such panes for the Semper Opera.

...Die-cut parts made from PE foam to protect sensitive materials or surfaces from contact damage. PE foam is a closed-cell material with good cushioning properties and low density. It is more cost-effective than foam rubber or cellular rubber. In larger quantities, it can be cut or die-cut cost-effectively and precisely to shape; in smaller quantities or for special requirements, it can alternatively be water jet cut. Also available as sheet material.

... higher the specifications of the mirror the better the signal for it to produce a better transmission or reflection curve that it relatively to the sample. For more information read PDF… Material::Soda lime float glass, white plate, BK7 or equivalent Diameter Tolerance::+0/-0.2mm Lengths/ width::±0.3mm (≤100mm), ±0.5mm (>100mm) Thickness::±0.25mm Surface quality::<60-40 scratch/dig for general purpose, <40-20 scratch/dig for λ/4 Flatness:: λ/4 for polished substrates Parallelism::<3 arcmin Coatings::• Enhanced aluminium 94%R for visible applications.

...Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and precise discharge jet. Graduation according to Category B (Tolerances according to DIN EN ISO 385). Material burette:borosilicate glass 3.3 Parts in contact with the medium:PE, PP, natural rubber, borosilicate glass...

... wastesAir filters containing bacteria and viruses Infected laboratory animal carcasses, organ parts, blood and all objects that come into contact with themPathological Wastes Body parts and organic parts originating from places such as operating rooms, morgues, autopsies, forensic medicine , placenta, amputated limbs, etc. (human pathological waste)Syringe needle, other sharps containing needles, scalpel, lam-coverglass, glass pasteur pipette, other broken glass, etc. PRODUCT CODE:TK-240-TAK...

... AMB (antimicrobial) Glass Reinforced Plastic, painted sheet or stainless surface EPDM rubber based gasket system Seamless surface in the use of 1.5 mm AMB (antimicrobial) GRP The desired color option on the door leaf Door leaf and frame, anodized aluminum that prevents heat transfer Door leaf, 42 kg / m³ density high pressure polyurethane injection 220 volt, 25 w / m silicon based resistance in frozen storage doors Aluminum profile with resistance on the floor 80-92 mm Leaf thickness for mid temperature cold rooms 120-150 mm Leaf thickness for freezer room and blast freezer rooms...

... It is a glass fibre tape covered with a thick layer of red silicone rubber which provides the tape with a high level of heat insulation. It is a very flexible tape, which is suitable for protecting hoses and electric cables by means of bandaging without having to disassemble or disconnect the parts to be covered. It offers continuous protection at operating temperatures of 250°C and can...

...All-in-one table device with approximately 300x400mm laser area. Our Vitrolux Hv2 table devices feature a powerful industrial PC, with a 22' touchscreen used as the monitor. Inside, there is a built-in camera that can be used for remote maintenance and can also output to a separate monitor, allowing customers in the store to see the laser process. Of course, network and USB connections are also available. And useful for operation in open sales areas – the laser door can be locked, making it easy to secure removable parts like the keyboard and mouse at closing time.

...For hightech accessories, we use materials such as Arnite, Grivory, Ryton, Ultem, and Ultrason (partially filled with up to 50% glass fiber). Furthermore, we are able to achieve the highest degree of precision both in concentricity and in measuring range, thanks to our tool concepts that provide for innovative cooling and for the use of innovative molding materials.

...The outer walls are made of galvanized steel sheets, which are painted and foil-coated. Our interior walls are made of polyethylene terephthalate, providing an attractive appearance as well as robust protection for the container. All production parts used are TSE certified and meet the highest standards. The ceilings, floors, and walls are made of machine-rolled and galvanized sheets. For custom designs, other sheets and layers can be used depending on the static calculations. Additionally, the supporting elements can also be adjusted.

...suitable for harsh industrial environments. Its inherent wear resistance makes it ideal for applications with more friction and wear, such as gears and bearings. PA66 has excellent electrical insulation performance, is an excellent electrical and electronic insulation material.the water absorption of PA66 is large, and the saturated water absorption can reach more than 3%, which will affect the dimensional stability of the parts to a certain extent. PA66 is widely used in automotive, mechanical, electrical and electronic fields, often used in the manufacture of gear, bearings, connectors and other...

... second time zone. GlobHora, though, has the remarkable capacity to indicate 24 different time zones. Key Features: - Sapphire glass quartz movement; Item code:PZGH-SS Product name:Philip Zepter GlobHora Gross weight [KG]:1.14 Net weight [KG]:0.7 Application:Wristwatch Producer:HOME ART. & SALES SERVICES AG, Sihleggstrasse 23, 8832 Wollerau – Switzerland Dimensions:Watch case: 44 mm Made...

... - Easy to handle thanks to the modern roller sliding system and high-quality hardware - Glass: 2 or 3 panes with a maximum thickness of 48 mm - Glass package bar: aluminum or warm edge - Sliding doors with 2 to 4 leaves with multiple options for fixed and movable parts. - Harmonious lines for large glazing up to a maximum size of 14 m² for a 2-leaf sliding door. - Glass options: burglary-resistant...

...This SG 52 façade is a traditional system, also known as a Stick system. The glass is fixed to the load-bearing profile using aluminum components. This system requires the insertion of a profile into the glass chamber (U-profile), which, combined with the aluminum parts, ensures the glass is secured on all four sides. The combination of different thermal break thicknesses along with the large...

... different refrigerant options High & Low Quick Coupler Set with Adapters Hose Adapters (S/16" Male to 1/4' Female) 1/4' Access Valve & connection on body Sight Glass Easy Grip Handles Carrying Case SKU:TH359MHK118936 Item model number:M0-002001 Product Dimensions:5.91 * 3.94 x 1.97 inches, 2.95 Pounds...

...1, Lose Wax Process(soluble glass): wax injection, wax welding, dipping, sand-coating, shell-making, dewaxing, cleaning, pouring, cutting, reshaping, machining. 2, Materials: carbon steel, alloy steel, cast iron, cast steel, pig iron, grey iron, ductile cast iron and so on. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by...

...2 Panel Central Landing Door - M1 FRAMED GLASS PANEL / FULL GLASS PANEL EN 81-20/50 norms EN 81-71 EN 81-72 EN 81-58 E, EI, EW Reliable and robust structure designed for high speed, high traffic elevator systems Silent high speed /rise door Special design to avoid air turbulance reduce noise W :650 - 1300mm H : 2000-2500mm...

easyFenster and easyWintergarten is a company that takes care of your needs with expertise when it comes to glass fixings. Tested glass clamping profiles for the attachment of insulating glass or triple glazing to roofs or walls. Our specialty, with a large supply program (stock items), includes various glazing profiles, laying profiles, clamping profiles, or glass support profiles for glass thick...