compressor units

ABZ – our name stands for individual solutions, experience, and reliability. And for worldwide success in power generation with diesel generators – and we are proud of it! Our headquarters is located in Henstedt-Ulzburg, about 30 km north of Hamburg. The convenient proximity to the port, airport, and the A7 motorway allows for quick and uncomplicated transport handling to all corners of the globe...

We provide you with all the tools and equipment for professional use on the construction site.

...The "original" quiet compressor with a noise level below 45 dB(A), JUN-AIR’s oil-lubricated compressors are the lifeline of dental surgeries worldwide, and many units are still operating after 25 years - a testament to the quality and reliability of JUN-AIR compressors. With their unique design and modern technology, they are being implemented in an increasing number of applications, including laboratories, dispensing systems, graphics, health care, door opening devices and fitness equipment.

... and easy to install. The units can be built outdoors, but additional shelter against rain or snow should be provided. Assembled with copper aluminium fin condenser, Bitzer or Copeland compressors with crankcase heater, high efficiency AC/EC axial fans and a liquid receiver. Built on an open welded galvanized steel frame with powder coating.

...Reliable compressor unit with oil injection. Ideal for gases with low molecular weight, high compression ratios, or gases with varying gas compositions. Stepless volume control through hydraulically actuated control slide. Design according to API 619 possible. Customer-specific solutions and modifications. Flow rate: 300 to 9,500 m³/h Overpressure: 25 bar (g) Transport medium: Refrigerants as well as neutral, flammable, mixed, and process gases...

...For anyone intending to carry out routine maintenance to critical pressurisation units, the 12377 is an essential tool. Weighing approximately 30kg this unit is fully portable. Its design incorporates wheels, and an extendable handle to aid its movement. Following a recent design change to incorporate the same 1/3HP compressor that is used in the 12434, and 12437, this small unit is now able...

... made from heavy-gauge steel. Fully CE design compliant. 3 phase and earth electrical connections, no neutral cable required. Low sound attenuation for sound-sensitive environments. Energy efficient compressor units for low running costs. Easy to read and adjust control panel. Condenser and fan guards provide protection against accidental site damage. Can be used on a variety of installations, such...

Why are we cheaper than others? We don't have an expensive sales force! Consultation is conducted competently and purposefully via phone and email, but we cannot develop your products. Our product costs are not cheaper compared to competitors; however, our distribution costs are significantly lower, and you receive this cost advantage entirely. We also avoid inflated prices for small quantities;...

...The split cooling unit is preferred in cold rooms with small to medium capacity. These cooling units come in three different designs: hermetic, semi-hermetic, or scroll compressor. They are favored for their easy installation, maintenance comfort, and environmentally friendly production.

... LED light, can achieve speeds of up to 200,000 revolutions per minute with various handpieces. Additional advantages of the BPR Swiss SMART-PORT treatment unit for dentists: - Effortless setup and takedown - Only requires a power outlet for operation (Plug & Play) - Suction power comparable to your practice: 220 l/min, even spray mist is suctioned (most other providers' units only offer suction power of 11-30 liters) - Oil-free and very quiet (48 dB/A) compressor for a maximum operating pressure of 4 bar - From the outside...

...Refrigeration Systems, Cooling Units, Cold Storage Refrigeration, Condensing Unit, Evaporator, Compressor Rack...

...Refrigeration capacity JDK JME-M-125, Compressor MTZ125 Maneurop, R134a, R404A, R407C, R507, 380-400V/3/50Hz, MCC 27A, Starting current LRA 105A, Condenser type 125-2V, Fan 2x450 mm, Air flow 7250 m3/h, Connections 22x12 mm Refrigeration capacity measured for condensation temperature/ambient temperature 32°C, Refrigerant R404A, Measurement conditions: EN13215 Refrigeration capacity (W) at To - 10 °C - 15 °C - 20 °C - 25 °C - 30 °C - 5 °C 0 °C 16640 13630 10880 8460 6380 19870 23200...

...which consists of essential components such as a thermostat, fan, and evaporator, provides cold air to the area that needs to be cooled, transforming it into a cold room or cold storage. The other main part of split cooling devices is the outdoor unit. The outdoor unit also contains a fan. In addition to the fan, there are components such as a condenser and compressor. The outdoor unit expels the warm air it has taken from the area to be cooled outside. This contributes to cooling the indoor area much more effectively and quickly.

...With the BK 41 D (a mobile compressor), operations with pneumatic tools can be carried out optimally and independently of location.

...F30A - the most reliable LC-MS Nitrogen Generator nitrogen purity: up to 99 Nominal power: 1,7 kW Efficient and innovative - designed for your laboratory Ideal for use in laboratories where a dependable and affordable source of nitrogen is essential and is suitable all laboratories Premium compressor with state-of-the-art control Unique nitrogen generation solution for your laboratory...

... mechanical throttle opening. As a result of this relaxation (pressure reduction) at the outlet, a liquid-vapor mixture is present behind the high-pressure float regulator, which is directed to the separator. Generally, a high-pressure collection vessel can be omitted. By continuously relaxing the refrigerant, pressure fluctuations are avoided, and the amount of flash gas is reduced. This decreases the electrical power consumption of the compressor. This saves up to 13% energy.

...In heating mode, it has a power output of 5.4-15.63 kW and an efficiency of COP 4.72 at a hot water output of 35°C and an outdoor temperature of 7°C. In cooling mode, it has a power output of 4.6-11.8 kW and an efficiency of EER 3.23 at 7°C water output in 35°C outdoor air. Power: 16 kW Circulation pump: Built-in Compressor: Panasonic-Sanyo Operating modes: Cooling, Heating, Hot Water Power...

...Compressors ensure that refrigerators or car air conditioning units can draw heat from the air, hence cooling it. A compressor functions reliably, but only if the component parts that are used are produced and assembled with extreme precision. Our flexibly configured systems manufacture high-precision conrods, pistons and crankshafts in large quantities and with very short cycle times. Let our experts implement a solution that is tailor-made for your company. Quality shows in the detail.

...Equipped with a cooler and a compressor, the event tanks can be used anywhere there is a power supply. This ensures that the recipient is constantly supplied with wonderfully fresh draft beer during the event. A sturdy stainless steel frame protects the tank and all other components from damage. Thanks to the heavy-duty wheels attached to the frame, the tank can be easily moved. For placement on...

... passed through the evaporator (cooler). The condensate extracted from the air is collected in a built-in water tank or directly drained through a hose. After that, the air is reheated with the compressor's waste heat, so the dry air blown back into the room is approximately 1°C warmer than the air that was drawn in. Applications include swimming pools, communal showers, paper storage rooms, damp basements, etc. We offer a wide range of dehumidifiers, both fixed installations and mobile units - just ask!

... between 400 and 800 W with a height of just 3 or 4 RU (rack units). It features 24 V miniature compressors which are on a par with the large versions on a 230 V basis and also include a speed control unit. This power density means that miko offers an attractive and efficient alternative to Peltier coolers, including for high ambient temperatures. Both the plug-in and stand-alone units in the miko series are noise- and vibration-reduced. ...

...Ascobloc's cooling and freezing tables come in a variety of options, whether as a plug-and-play unit with its own compressor or for connection to a central refrigeration system. The equipment ranges from 1 to 5 GN compartments with hinged doors or drawer blocks. The use of branded compressors ensures the reliability and ease of maintenance of the units.

...In pneumatics, mechanical power transmissions are carried out in closed systems using compressed air. The compressed air generated by a compressor must be distributed and processed before it can perform the desired application. Classic pneumatic components include pneumatic cylinders, pneumatic valves, maintenance units, and hose and pipe systems. Typical applications can be found in automation technology, control technology, and positioning technology.

... technical rooms. Compatible with all indoor units in the DRV range, including 0.6 HP compact cassette units, ultra-slim ducted units, or wall-mounted units. Exceptional connectivity (up to 13 indoor units on the 6 HP model). Ultra-precise refrigerant flow control with balancing based on the demand of each indoor unit. Twin Rotary Inverter compressor with vector control, allowing speed adjustment to within 0.1 Hz. Total length: 180 m / maximum equivalent line length of the most...

...Termodizayn split-type cooling units come with a wired remote control panel. They are shipped ready for installation along with the electrical panel and all automatic control components. Maximum attention is paid to the compatibility of the compressor, condenser, and evaporator in our cooling units. A common issue, especially in hot weather, is that machines become insufficient and inoperable...

... located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible...

... compliant with design guidelines for CE marking. Low noise. Energy-efficient compressor units for low operational costs. Easy-to-read and adjustable control panel with inlet and outlet temperatures, system pressure, and set parameters. Control that maintains stable temperatures under all system conditions. Quick and easy to install. Can be used in conjunction with local cooling water or can be...

...Special climate cabinets and chilled water units for air conditioning switch rooms in the paper industry. Utilization of well water for compressor-less air conditioning. Standard manufacturer Siemens S7...

... Refrigerant R407c Hermetic rotary compressor: 730 g Sound level at 3 m Maximum distance between the two units: 49 dB(A) 30 m Dimensions of the indoor unit (LxWxH) in mm Dimensions of the outdoor unit (LxWxH) in mm: 815 x 360 x 1030 582 x 360 x 460 Weight of the indoor unit Weight of the outdoor unit: 86 kg 16.5 kg...