air suction

...For liquids that have to be mixed before processing and then pumped or contain small solids, the new Diaphragm pumps with an integrated air-operated Double diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing tube and a 3-way valve. The pre-assembled system is immediately ready for operation with a few simple steps and is also suitable for...

... allows for easy changeover, saving time when switching to different products. Technical specifications of the machine: The machine has a total of 3 motors, including an air channel suction aspirator, with a total motor power of 6.5 kW. The dimensions of the machine are 568x163x270 cm. The machine operates at 380 volts. Machine dimensions: 568x163x270 cm Voltage: The machine operates at 380 volts.

We are a medium-sized, certified, owner-managed company with over 25 years of experience in the production of high-quality industrial extraction and filtration systems. From the beginning, extraction and filtration systems and their manufacturing have been the dominant theme in our company. Drawing from this wealth of experience, we see ourselves not only as a supplier of extraction and filtratio...

...Complete range of hydraulic filters and accessories for all hydraulic equipment. Suction Low – medium – high pressure Return Tank accessories, Filtration unit, Absorbents...

... because the tip, through a lifting and lowering system, can penetrate directly into the product. The tip is ionizing (neutralizing electrostatic charges) and blowing (compressed air injected), which allows for the expulsion of both visible and invisible dust that is then sucked into the system's filters. IONIZING HEAD WITH BLOWING AND SUCTION FUNCTIONS BODY: Diameter 50 x 80mm MAXIMUM TIP LENGTH...

...Production Location: America Brand: Danfoss Compressor Type: Scroll Operating Mode: HBP (+7.2°C / +54.4°C) Compressor Power (Hp): 4 1/2 Electrical Supply: 380V Refrigerant: R410A Cooling Capacity (Watt): 13,300 Motor Type: 3 PHASE BOM: 120U1376 Compressor Model: HRH054U4LP6 Displacement Volume (cm3/rev): 52.11 Frequency (Hz): 50-60 Suction Line: 7/8" Discharge Line: 1/2" Brand: Danfoss Product Code: 16.45.054...

...The double branch allows for two take-offs in a suction network. This piece is custom-made according to your needs. The following information needs to be specified: the diameter of the first take-off (Ød2) the outlet diameter (Ød3) the diameter of the second take-off (Ød4) the angle of the take-offs (30° or 45°) Also, for better aerodynamic efficiency, prefer a take-off at 30°. Dimensions: 120 mm Angle: 30°, 45°...

...The TBH Health Pro Silence, ideal for dermatological clinics and surgeries, offers a powerful, quiet suction solution for medical procedures. With remote control, high airflow, and a comprehensive filter area, it ensures excellent air purification. The patented 'InLine' pre-filter extends the main filter's lifespan and reduces maintenance efforts. Equipped with HEPA H14 and activated carbon...

...Air vents (simple function) for evacuating air pockets from pressurized ducts MAIN FEATURES - Integrated operation controller - Ductile cast iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Minimum pressure: 0.1 bar - For 1/4 turn brass shut-off valve - Operating temperature: from 1°C to 70°C - Flange drilling according to standard EN1092-2 - Product certified A.C.S. Nominal Pressure: 16 Bars...

... shapes, straight reducers, 90° bends, 45° bends, 135° bends, and 180° bends. We are also happy to develop custom shapes according to your requirements or design. Below you will find the pressure levels for the Shore Master automotive and industrial applications – suction/vacuum hoses, radiator hoses, air and water hoses.

...Standard Dimensions: (75x150h) cm It features three articulated arms. The joints can be easily rotated and moved, allowing them to hang in the air. Once positioned as desired, the joints can be locked in place. There is a counteracting spring system to prevent the hood from sagging. The movable and stationary joint parts of the local air suction arms are made of chemical-resistant plastic. The suction pipes are made of anodized aluminum. The suction mouth has a transparent plastic hood. It includes a manual damper to adjust the airflow. The radius of movement for the local suction unit is 1500mm.

... are attached. Through their movements, these membranes alternately displace suction and discharge valves. They are commonly found for pumping explosive and hazardous products, and various classifications of ATEX certificates are available. Easy to maintain, they are simple and lightweight. Many accessories are available to meet process requirements. As for the electric execution, it is a crankshaft assembly that activates the membranes.

... cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms! Filter area:30 m³ Clean gas value:20 mg/m³ Volumen flow:3000 m³/h...

...1. High-quality material: healthy and harmless material, strong and durable, not easily broken, beautiful and easy to carry. 2. One-man operation: The tank is connected to a vacuum air pump and an extension tube, which can be used by one person immediately, conveniently, and quickly. 3. Vacuum suction: No fire needed, avoids the risk of burning, safe and secure. 4. Flexible and transparent: the...

...Lightweight Universal Polyurethane Suction Hose PU hose in a lightweight design for the suction of all types of food, both liquid and oil-based as well as abrasive food up to 40° Celsius. Also suitable for air, dust, powder, wood chips, chemical vapors, and for transporting insulation material. Very flexible and wear-resistant. In bends, the hose maintains its full flow by folding the wall...

...Using negative air pressure, the Dry Destoner makes the wheat flow on an air cloud. The heavier foreign materials (stones, glass etc.) stay on the vibrating sieve. The sieve acts as an escalator and carries the product to the discharge spout. The machine is driven by two vibration motors. The vibrating body is isolated from the chassis using rubber vibration dampeners and the vibration is isolated. The inclination and air suction level are adjusted for proper cleaning.

...Pulsotronic metal particle extractors come in a 450x450 mm housing. The extractor integrates directly with the suction feed system (pulsed air). Its design makes it independent of variations in speed, flow rate, density, and material size. The sealing of the entire unit is maintained during the evacuation of metal-contaminated material. Diameter of passage: from 38 to 70 mm Sensitivity: from 0.3...

...its use is limited to 120 °C. Note: In automatic conveyor systems, PTFE-containing silicone greases can undergo explosive decomposition reactions under high pressures and air inclusions. Air suction, rapid pressure increases, and high pressures should be avoided through appropriate design and system control. Vent the entire system before commissioning! This is a special product that can be individually produced for you upon request. Minimum quantities may apply. Just contact us.

...At Air Concept Pneumatic Systems, you will find a wide range of useful workshop tools. • Blow guns • Cleaning guns • Body guns • Tire inflators • Brake bleeders • Suction-blow cleaning sets • Oil extractors • Hose reels • Spring balances • Hoses and spiral hoses • Electric condensate drain valves • Maintenance units (single and combined) such as pressure regulators, filter pressure regulators, mist lubricators...

...The AER-SL is an ideal aerator/mixer for applications that require intensive mixing, the generation of a directional current, and a moderate supply of oxygen. The combination of an open triple spiral SCREWPELLER® and a vacuum chamber (Venturi system) allows for the suction of air and the dispersion of fine to medium air bubbles below the water level in the basin. The propeller ensures mixing and the generation of a directional current. The AER-SL can be mounted on a floating structure, on a guide bar (with or without a float), or weighted at the bottom of a basin.

...We offer ventilation and solvent, smoke, dust, and mist extraction systems... A variety of extraction devices are available: articulated arms, extraction tables, hoods, suction walls, booths, custom sensors... Our installations, equipped with variable flow "VARIDEB", are designed to optimize energy consumption. An extraction system is only effective if the extracted air is compensated, which is why we also offer various solutions for air compensation. Based on the experience we have gained, we can provide installations ranging from 100 to 100,000 m³/h.

...The KRAPF & LEX filter series kulVAC is suitable for small air volumes in conjunction with material conveying fans. The KRAPF & LEX filter series kulVAC The KRAPF & LEX filter series kulVAC is suitable for small air volumes in conjunction with material conveying fans. The filter operates without pneumatic decoupling and is mounted at the end of the pressure line of the fan. The discharge is collected in a dust-tight collection container. Special equipment: Material conveying fan Width: 1.1 m Depth: 1.3 m Height: 2.0 m Number of filter hoses: 9 Suction capacity: up to 1500 m³/h...

...Dimensions (L x W x H) 2445 x 1000 x 2360 mm Suction connection Ø 250 mm Air flow 4800 m³/h Pressure 2500 Pa Motor 5.5 Kw / 400 V / 50 Hz Noise level 72 dB(A) +/3 Total filter area 23.1 m². Filter sleeves made of stainless steel antistatic polyester felt 500 gr/m² with snap ring coupling and internal sleeves arranged in a spiral. 2 metal bins of 250 liters with plastic bags for collecting sawdust...

... injectors from Schuh Anlagentechnik are suitable for edge strips made of composite films and paper, as well as for hem strips made of aluminum, with rolling speeds of up to 2,500 m/min and hem widths of up to 100 mm. The injector consists of the compressed air part with the nozzle, the suction part, the mixing tube, and the diffuser.

..." construction inside the table prevents dust accumulation (dust nests). The sound-insulated suction nozzle ensures low noise development. The grinding table can be connected to an existing central extraction system or a dust collector. The height of the work table can be easily and continuously adjusted to meet requirements. The table is available as standard in galvanized finish or optionally with powder coating.

... itself thousands of times. Weight: 1.8 kg Stroke: 18 mm Max. pin diameter: 3.4 mm Pressure: 5 - 7 bar Pulling force at 7 bar: 11,700 N Noise: < 75 dB(A) (68.32) Air consumption: 2.4 liters Hose connection: G 1/4 internal, can be mounted on the left or right...

...). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably...

... Automotive and Industrial – Suction/Vacuum hoses, Radiator hoses, Air &amp; Water hoses. We supply EPDM hoses in a wide range of standard and customized shapes and sizes, with different fabric reinforced options. We also have EPDM corrugated (convoluted) hoses, for air-cleaner applications in Automotive Filters. These hoses have a higher than usual bend radius, for trickier connections, and high...

... applied in the chemical and pharmaceutical industries as well as for conveying granulates in plastics processing and the food industry. The pneumatic conveyance process is carried out by suction and compressed air, i.e. by vacuum or positive pressure, and is mainly used when sensitive substances are transported. Heavy substances such as cement, sand or gravel are mainly transported by positive pressure.

... and rises into the filter section, where the filter bags, which are flowed through from the inside, retain the dust. In the clean air housing, the filtered air is collected and either returned as recirculated air to the operation or discharged as exhaust air to the outside. To clean the filter bags, a suction device rotates beneath the bag floor. The rotation speed is below one revolution per minute, allowing sufficient time for cleaning even extremely long filter bags. The cleaning air flow is generated by an externally arranged fan...