outlet valve

... kg (13.2 lb/h) Maximum inlet pressure:100 bar (1450 psi) Maximum outlet pressure:0.5 - 70 bar (7 - 1015 psi) C2-K32 part no 4046644 Connection:R 2“ C2-K32 part no 4046644 Weight approx.:19 kg (41.9 lb) C2-K32 part no 4046644 Maximum inlet pressure:70 bar (1015 psi) C2-K32 part no 4046644 Maximum outlet pressure:0.5 - 70 bar (7 - 1015 psi)...

...Commercially available drain valves made from polyethylene or polypropylene cannot be used for solvents. The StopCock PA drain valve is made from electrically conductive polyamide, making it highly suitable for solvents. StopCock PA fits 3/4" external threads and, with the included adapter, 3/4" internal threads, thus fitting almost all standard canisters and barrels with bottom drain threads. Media-contacting parts: Electrically conductive PA and PTFE Inlet thread: 3/4" nut Outlet thread: Outlet angle...

...Manual reset shut-off valve for Oxygen, inlet nut Ch 19 (G 3/8” F x M) outlet G 3/8” F x M...

...The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing before sending a closing signal to the pump. In case of casual pump stop, the valve acts also as an automatic check valve, preventing backflow over the impeller.

For over 150 years, we have been supplying laboratory dealers worldwide with gas burners, stand materials, lifting platforms, and various metal instruments. We produce for laboratories, schools, universities, pharmacies, dental practices, and various industrial sectors. Our products stand for quality, durability, and design. What sets us apart is the high level of in-house manufacturing with the ...

...A check valve - check fittings or one-way valve is a valve that normally allows the flow of liquid (liquid or gas) in only one direction. Check valves are two-way valves, meaning they have two openings in the housing, one for the inlet and one for the outlet of the liquid. There are various types of check valves used in a wide range of applications. There are different check valve seals such as...

... 7.2 mm (20 062), ball valve Suction hose, 2 m, with spiral spring Suction probes, Ø 5/6/8 mm With adapter for BMW, Mercedes, VW, Audi and Smart Probe holder Transparent dispensing hose, 2 m, with Steel outlet elbow, ball valve Collection funnel with removable sieve and additional coarse sieve Solid push handle 2 fixed wheels, 2 steering wheels Pressure evacuation Container made of 1.5 mm sheet...

...This micro air valve was developed specially as a small signal element for mounting in confined spaces. Its design allows a big orifice at small overall dimensions. Pre-controlled by an air outlet in the integrated tube nipple it only needs a minimum of actuating force to shut off the pilot port. Function:3/2-way NC  Pressure range:1.5 - 8 bar Nominal orifice:2 mm Kv-value:0.8 l/min Actuation type:mechanically actuated, plunger  Type of pneumatic connection:M5  Ambient temperature:-10 ... +60 °C Materials:Polyamide, Al, NBR ...

... simple and intuitive operation. The multi-colored LEDs provide a visual warning when the water parameters deviate from the desired range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Measuring water filter . Flow monitor . Flow regulator DFR 45 with measuring water extraction point and built-in temperature sensor . Inlet and outlet valve . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multi-colored LEDs . Cover hood The measuring cells are partially packaged separately and are not pre-assembled.

MOUZE specializes in industrial suction of wood chips, dust, as well as air and smoke filtration. With over 10 years of experience, we are committed to providing tailored, high-quality solutions to meet the specific needs of our clients. Our Services Audits & Consulting We help you design suitable solutions through detailed audits and expert advice. Installation A personalized follow-up is ensu...

... bags Production Speed: up to 20 cycles/min (up to 1200 cycles/h) Material for Bags: Thickness of PVC bag body 0.1 - 1 mm, max. width 300 mm, max. diameter of spool 300 mm Material for Check Valve: Thickness 0.1 - 0.5 mm, max. width 45 mm, max. spool diameter 200 mm Machine Control: Omron Pneumatic System: SMC Electrical Switch, Circuit Breaker, etc.: Schneider High-Frequency Generator: Domestic...

...Ideal for educational centers, it allows for height adjustment according to the age of the students. Requires water inlet, drainage, and power outlet. Manufactured with stainless steel for both exterior and interior. Enhanced hygienic protection through a special shell with anti-vandal finish. Water height regulation at the fountain via a high-precision valve. Greater comfort and hygiene with the...

...KTA, AVS D 100/50, EDF/Areva/RCC-M Shipbuilding/Boatbuilding: ABS, ClassNK, BV, LR, DNV/GL Examples - Drain Valve/Outlet Valve - Bracket, Holder, Pendulum - Throttle/Throttle Plate - Pressure Vessel - Nozzles/Nozzle Heads - Filter Pot - Flange Socket - Flanges/Container Flanges/Pipe Flanges - Fitting, Forged Fitting - Fork Tube/Pipe Fork, Forged - Caps/Pipe Cap/End Cap/ - Boiler Construction...

...Although Termar electric pumps have check valves, it is advisable to install an additional valve at the outlet of the electric pump. Type: 4" Ref: 1104608 Mode: B 10 ML Volts: 240 HP: 1 Amps: 6.2 Output: 1.1/4” MCA: 23-69 L/H: 6000-1200 Motor: Leo Reference: 477.1104608...

... cross-section, e.g., in robotic applications - Prevention of cavitation in products with high flow limits Optional components: - High-pressure ball valve for... Connections for inlet and outlet: each IG R 3 / 4 Installation length: 120 mm Weight: approx. 1.5 kg Max. permissible product overpressure: 8 bar Buffer volume: 25 ml Permissible air pressure: 2 - 7 bar...

Whether it's a complete system or individual components - if conveying is required, you are in the right place with us. We get your barrels, frames, tires, pallets, boxes, crates, bottles, etc. moving. Since April 2019, Tobias Schreiber, who was previously the long-standing managing director of Liese GmbH, has continued the previously located areas of conveying and nuclear technology (Waste Mana...

... inlet valve deposits, outlet valve recession, bearing corrosion, increased oil consumption, and a shortened lifespan for lubricants. Fleetmaster CNG 15W/40 is engineered to mitigate the adverse effects of these conditions, ensuring improved engine protection and extended oil durability. Available in:Bulk, 1000 Litres, 200 Litres and 20 Litres Item code:VI2-2246...

...Manometer Valve Mcl 2 V - MANIFOLDS Type: MCL 2 V Material: Stainless Steel Z 2 CND 17/12 (316 L) Connection: Inlet and outlet Ø 1/2" NPT.F. Purge 1/4" NPT.F Mounting: Directly on piping Weight: 0.900 kg...

... generator Light control from the control panel Control panel dimensions: 90*90*19 mm Session time management. Water connection 1: Steam outlet (15/21) 2: Safety valve (15/21) 3: Water inlet ø 20mm (15/21) 4: Automatic drainage ø 25 mm (20/27) to be connected to your drainage Automatic functions 1. Automatic filling Reference: ps9kw Height: 313 mm Width: 147 mm Weight: 12 kg Length: 486 mm Dimensions: 486*147*313 mm Weight: 12 kg...

... outlet, a continuous vacuum can be created by a linear movement of the diaphragm, whereby a ball valve ensures that the material can be further pressed. The membrane pump has a maximum pump capacity of 25 ltr/min and can handle a maximum working pressure of 7 bar.

... diameter wheels and retention basin • Rotational speed: 1400 rpm • Power: 0.75 • Voltage: 230 V single-phase • Current: 4.6 • Outlet: 1" • Max. head: 60 meters Features and Benefits: • Mobile filtration unit with single filter and retention basin Fluid: Diesel, Oil Technology: Vane Atex: No Pump Type: Equipped Flow rate: max 1.5 m3/h Outlet: 1" Pumping Group: Kits or emptying groups Suction: Built-in foot valve Usage: Diesel, oil...

... quickly fill or transfer to a higher container. The MINIFLUX is ideally driven by a collector or compressed air motor. Advantages: - Usable even with low ceiling heights - Allows pumping directly at the bottom outlet even with stacked IBCs - Significantly higher flow rate and delivery pressure compared to filling from the outlet valve using the hydrostatic pressure of the medium - Overall reduced...

...Outlet valve...

...DN 15 - DN 50 Nominal pressure: PN 40 Materials: Stainless steel 1.4571 / 1.4404 / 1.4301 / 1.4305; Ductile iron (EN-GJS-400-15) Temperature: -30 °C to +220 °C Connections: Connections for fluid inlet and outlet are selectable and can be interconnected.

...Direct acting solenoid valve are operated directly with the force of the solenoid and due to the same even in 0 bar inlet pressure or 0 bar differential pressure between inlet and outlet port such valve can fully open or close. Generally, as here solenoid force is used, generally this force is counter with the pressure force and/or spring force to Open or Close the solenoid valve. Due the same...

... part of the cooler, there is a discharge mechanism which ensures even removal of material from the cooler chamber. Model/Type:VK-RP Material:structural steel, stainless steel Discharge mechanism:inlet valve, adjustable system for uniform layer of material Inlet valve type:gear Capacity:2.5 – 25 t/h Manufacturer:Geelen Overlay:paint, spray painting Cooler chamber:inspection holes, filling level sensors, fire safety systems Discharge system:triple movable grit ...

... materials: PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate Seal materials: FPM, optional: EPDM, FFPM Electronics: ARM Cortex M3 microprocessor Motor: brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors Electrical connection: D-sub plug, 15-pole (male connector) Power supply: 24 V DC ±10 %, max. 1.5 A Interface: RS-232...

... interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

... differential pressure/flow regulator to provide constant flow rates in case of varying inlet or outlet pressures. The device has approvals for use in hazardous areas. Fluid::for liquids Technology::variable-area Other characteristics::glass tube; in metering tube Process temperatures::-5°C to +100°C Operating pressure::up to 10 bar Upper limit of measurement for liquids::0.4 to 160 l/h (water: 20°C) Upper limit of measurement for gases::5 to 5,000 l/h (air: 20°C, 1.013 bar)...

...Stainless Steel Ball Outlet Valve with Threaded End and Hose Connection - with hose coupling and closure tab - Cylindrical G-thread according to DIN EN ISO 228-1 (connections not sealing in the thread) - Stainless steel material No. 1.4408 (316L) corrosion and acid-resistant steel casting - Seal: Teflon (PTFE) - Operating pressure PN max. 63 bar (temperature dependent)...