motor rotors

...Reliability & Durability The integration of the copper-injected rotor in asynchronous motors, widely used as traction motors in rail transport (trams, subways, High-Speed Trains) for many years, enhances performance without compromising robustness. It is therefore a proven solution in terms of reliability and durability (no loss of motor efficiency during use).

...Slip ring motors are often used in applications where the maximum transient torque needs to be greater than that of a conventional squirrel-cage induction motor, such as in quarries. SLIP RING MOTORS (OUR CODE: MB) - Three-phase motors with wound rotors - Standard cast housing - Sealed to IP55 and available upon request in IP23. - Available in 230/400V from 22kW to 315kW, 400/690V up to 560kW...

...Surface Slow-Speed Turbine The Aquaturbo AER-GD slow-speed aeration turbine consists of a gear motor driving a shaft and the rotor. The entire assembly is mounted on a walkway or on a floating structure made up of three floats. Depending on the application, the rotors are available with 4 blades (channel) or 6 blades (square, rectangular, or circular basin). The rotors of the AER-GD slow-speed turbines are offered in fiberglass-reinforced polyester, epoxy-coated steel, or stainless steel, depending on the composition of the effluents and customer requirements.

... ... +60 °C (-4 ... +140 °F) Viscosity range:0.3 – 100 (max. 1,000 *)mPas Precision CV:1% (Coefficient of variation CV) Velocity range:100 – 6,000 (min. 1 *)rpm Fluid connection:manifold assembly M2.1 Wetted parts:PEEK™; shaft ZrO2 ceramics; rotors partially stabilized ZrO2; epoxy resin; shaft seal: graphite-rein Motor:DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet en Electrical connection:10-pole connector Dimensions (L x W x H):Ø 18 mm, length 90 mm Weight:approx. 65g Remarks:* depending on accessories, Customized solutions on request.

... clearances Disassembly + visual inspection of parts Dimensional measurements When the inspection is finished, an inspection report is drawn up with recommendations for repair. Execution of works After approval of the recommendations for repair, the execution of the repair / overhaul works begins. The scope of work may vary, but can include: Cleaning & steaming Sandblasting Preparation of technical drawings for machining by in-house engineering team Machining of parts (bearing housings, rotors, …) Balancing of rotating parts Coating of rotating parts Assembly Coating of exterior...

...Applications: •Magnetic rollers for copier and laser printer •Permanent motor magnets (rotors & other components) •Magnetic rings for aerodynamic component •Color Monitor/TV purity convergence magnet •Binders: PA6, PA12, PPS Characteristics •Binders: PA6, PA12, PPS •Can be magnetized in any direction, suitable for the radial or axial(face) multi-polar magnetized magnet. •One time...

Electromechanics Bergamini is a company specialized in the maintenance and repair of industrial electric motors, fans, vibrators, electric pumps, and gear motors. Our company, based in Ospitaletto in the province of Brescia, also focuses on the construction of AC motors, particularly those designed for use in critical conditions such as high temperatures, humidity, and high speeds. In our facility...

...When space is limited. maxon flat motors are well-suited for use when space is at a premium. They offer an attractive combination of high performance and a low price. The brushless flat motors by maxon motor are designed as internal and external rotors and can reach speeds of up to 20,000 rpm. Thanks to the simple design, it was possible to largely automate the manufacturing - this is reflected...

... and mechanical design. We provide made-to-measure units, for example, for existing foundations or special bearings to absorb additional forces. The power network conditions on site are taken into account for the electrical layout to ensure that only minor voltage drops occur and a reliable run-up is guaranteed. Our portfolio comprises asynchronous motors with cage or slip-ring rotors as well as synchronous motors with brushless or static excitation.

...Stator packs and die-cast rotors (three-phase) available in IEC fame size 56 – 355, 2-, 4-, 6- and 8-poles . The standard core lengths are available in frame size 56 – 180 from existing stocks .

NICMAS Concern, founded in 1994, stands as a powerful industrial conglomerate, unifying a multitude of diverse enterprises under its protective umbrella. Our core focus centers around the production of cutting-edge, energy-efficient machinery and its spare parts for a variety of industries and the energy sector. Furthermore, we pride ourselves on providing comprehensive maintenance services, advan...

...Up to 95 m³/min and 2,200 Pa. Housing made of aluminum casting, forward-curved drum rotors made of galvanized sheet steel, largely corrosion-resistant. Volume flow: 5.0 m³/min Total pressure difference: 350 Pa Voltage: 208-265/360-460 V Frequency: 50 Hz Current consumption: 0.45-0.72/0.26-0.42 A Power: 0.07 kW Motor speed: 2850 min-1 Fan speed: 2850 min-1 Weight: 4.5 kg...

...Rotary Lobe Pump, Stainless Steel Rotary lobe pump for the food industry, various rotors available, model ZP, available as a pump with a free shaft end, or as a unit with a cover for the motor.

...This stator weighs 2.1 tons! The thermal cleaning has removed the insulation, paint, and other residues. Using pyrolysis, the resins and paints are removed from the stators to simplify the removal of the windings. Subsequently, the rotors are cleaned.

... universal motors: Durability Smooth operation No sparking in the motor The starting torque of single-phase motors is usually lower than the rated torque. For applications under difficult starting conditions, we therefore recommend the use of three-phase motors or brushless DC motors.

...Our 2K-PUR adhesive application systems provide perfectly matched mixing ratios and a uniform adhesive application. Thanks to servo motor-driven eccentric screw pumps with wear-free ceramic rotors, mixing ratios from 1:1 to 1:50 can be achieved. The adhesive is applied using application rakes, ensuring a health-friendly process by avoiding spray mist.

...Up to 95 m³/min and 2,200 Pa. Housing made of aluminum casting, forward-curved drum rotors made of galvanized steel sheet, largely corrosion-resistant. Other product variants are available. Efficiency class: IE2 Volume flow (m³/min): 80.0 Total pressure difference (Pa): 1900 Voltage (V): 400 ∆ Frequency (Hz): 50 Current consumption (A): 10.5 Power (kW): 5.5 Motor speed (min-1): 2940 Fan speed (min-1): 2940 Weight (Kg): 66...

...The electrical part (terminal board, nameplate, etc.) has been designed to offer the highest universality and user-friendliness according to NEMA MG1-12 as standard. Modern motor series with the same stator packages, the same rotors, the same housings, flanges, power ratings, and with most technical solutions from the twin series of brake motors (HBZ, HBF, HBV). The generous electromagnetic...

... development of complete solutions for electric motor construction. From design to production, nearly 300 employees achieve top performance that is recognized worldwide. Everything comes from a single source. State-of-the-art manufacturing, storage, and communication technologies enable the rapid availability of all parts. Everything revolves around the topic of energy generation. This is a field...

...explosion-proof or weatherproof, elevator motors, three-phase brake motors, AC servo motors, motor-integrated frequency converters, installation kits, device motors, servo amplifiers, servo controllers, frequency converters.

... candles, magnetic filters, separation systems, spreader magnets, lifting magnets; rotors, motor housings, clamping blocks; current regulators for electrical systems, magnetic measuring devices, magnetizing devices, handheld gaussmeters, pole testers.

... operations. The produced motor shafts are inspected using Jenoptik systems. The company is capable of meeting a wide and diversified range of shafts and rotors required by the leading national manufacturers of electric motors, electric pumps, and automation components for special applications. MEVA works on motor shafts for engines and electric motors for generators and alternators, as well as devices for automation. Mevameccanica holds the International Quality Certification ISO 9001:2000 certified by TÜV SÜD.

...SAF spa specializes in the production of stamped laminations and components for small electric motors with brushes and induction. The company's quality system is certified according to the UNI EN ISO 9001:2008 standards. The company is part of Euro Group, a key supplier for electric motor and generator manufacturers. Thanks to its wide range of technologies, the Group offers its customers molds, equipment, stamped components, die-cast rotors, and assembly of finished parts for prototypes and series production.

...Typical Applications Include: - Air Compressors - Bores - Compressed Air Tool Bodies - Hydraulic Ram Cylinders - Brake Cylinders (Wheel) - Hydraulic Valve Bodies & Valve Guides - Clutch and Brake Master Cylinders - Hydraulic Motor Bodies - Finishing of Stainless Steel Tubing - Pneumatic Cylinders - Brake Rotors - Surface finishing of Boiler Components - Engine Cylinders Bores and Block Liners...

... rotors. We have a CEMB numerical control balancing machine capable of balancing rotors with a maximum diameter of about 1100 mm, a length of about 2 meters, a maximum weight of about 300 kg, and belt drive. We can guarantee tolerances up to G. 0.4 and issue a balancing certificate with initial and residual imbalance values. We perform balancing services for third parties for small series or individual...

Balancing, contract balancing, precision balancing of spindle shafts for machine and plant engineering, as well as electric motor manufacturing; Balancing of: rotor shafts – rotors - for rotating components - of motor shafts...