machine vice

...Rigid chains, chains that prevent bending back or chains that do not bend on one side stand out with their compact design. Thrust chains convert translational motion into rotation and vice versa. They are suitable for transmitting tensile and compressive forces that do not require chain guides. Push-pull chains can be used as a solution in many applications. Wherever the limits of traditional roller chains or drive components are reached (e.g. in tight spaces) push pull chains can provide a versatile solution in many different situations.

...The LT COMBO is a combination machine for laser cutting sheet, round, square and rectangular tubes with different open/closed section, made of iron or steel (soft and alloy). Thanks to the special machine structure, there is an automatic transition from sheet metal processing to pipe processing and vice versa in just a limited time. This particular machine is in good condition and can be viewed...

... cutting bulky materials. The low table height makes this type of machine ideally suited for use on normal hall floor level. BEHRINGER tabletop machines are supplied as standard in semi-automatic form. Automation is possible by upgrading with an additional material clamping vice at the end of the table. Positioning takes place on an axiscontrolled basis. Optionally available is 90° rotatable...

...Body and jaw holder hardened and ground. Note for ordering: Supplied with hexagon crank handle. Order jaw plates separately. Note: Mechanically operated centric vice. Suitable for automation: prepared with gripper slot for handling systems. Flexible mounting: suitable for zero-point systems, mounting on machine tables or on custom systems via a baseplate. Centring precision: +/- 0.02 mm. The use...

...Combourg mixes a classic style and simple lines. The micro-perforated brass square shades add a contemporary flair to the design. With its soft lighting, the wall lights and chandelier will bring a contemporary touch to a classic interior, or vice versa. The choice is yours! Chandelier delivered with chain and ceiling cup. Reference:5188/5 Dimensions:H 110cm Dia 80cm Measurments without the...

...N ° 1 puntel brand drilling rig, model PX3 / 1000 R tracked 6-cylinder 130 hp engine Stroke for rods of length 3000 mm Max pull 11 tons Rotation head with max torque 1350 kgm; 2 speeds Double vice with max passage 310 mm Winch Foam pump Winch Control panel on the side of the machine Remote cable track controls Overhauled and repainted Ideal for water wells Viewable at our office Price upon request Producer:Puntel Template:PX3- 1000 Condition:Refurbished Stock number:MZ9759 Guy:drilling rig...

...or large workpieces. In contrast, the shaping process is particularly economical for series production or frequently recurring tasks. Switching from "milling" to "shaping" or vice versa can be done with just a few adjustments.

...Machine Vices and Systems for Vertical Machining Mechanically, mechanically-hydraulically, or hydraulically operated Single and multiple clamping systems Clamping against fixed jaws or centric clamping Max. Clamping Force: 15 - 50 kN mechanically, mechanically/hydraulically 20 - 63 kN hydraulically Sizes: 24 - 160 mm...

... and long-term reliability -Particularly suitable for single-piece production if you wish to make your vice rotatable -Can be removed at any time -Swivel base supporting edge larger than the vice‘s maximum clamping range -Swivels 360° without indexing -Alignment on the machine with T-keys in slots in the swivel base -Clamping slots arranged in the form of a ring for machines with different slot spacings Clamping range S2/mm:78-162 Clamping force increments:2 max. clamping force in kN:30...

...65 NC YARD AUTOMATIC PIPE BENDING MACHINE Maximum bending capacity: 65 x 4 mm Maximum die diameter: 350 mm Minimum die diameter: 130 mm Maximum bending angle: 190° Hydraulic Vice Hydraulic Bed Hydraulic Roller PLC Electrical System Touchscreen operator panel Ability to view daily and total production quantities on the screen Hydraulic bending system Foot pedal control Possibility of operation with and without roller 1 year warranty Complies with CE standards 05323213230 info@livmakina.com.tr...

...The Chick Workholding System 5 family has evolved through the pursuit of innovation. The range consists of the Qwik-Lok fast-acting vice for vertical CNC machines, and the Multi-Lok for horizontal machine, which is essentially multiple Qwik-Loks placed on the side of a tooling column. Take advantage of the dual station clamping benefits which allow you to present multiple parts to the spindle at once, cutting machine downtime which in turn saves you time and money.

...Power panel (composed of 5 panels). Central control desk. Left vice control desk. Right vice control desk. Hydraulic station control box. Connection boxes (junction) – 7 pcs. Pump drive motors – 9 pcs. Oil heating system. Oil level sensors – 2 pcs. Clogged filter sensors – 3 pcs. Pressure switches – 9 pcs. Inductive sensors – 34 pcs. Hydraulic distributor solenoids – 112 pcs. Cooling valve solenoid – 1 pc. Proportional valves – 6 pcs. Proportional distributors – 6 pcs. Associated interconnection wiring.

...° left, with the following miter angles being particularly quick to set using fixed stops at 45° – 0° – 45°. Its double clamping arm allows for wide cuts. For larger diameters, the chips are removed from the clamping area using a chip removal wheel. The machine is delivered complete with a 1m long feed roller conveyor. Saw blade: Ø 370 mm Max. vice opening: 125 mm Dimensions: 3500 x 1200 x 1900 mm Motor power (2-stage): 3 KW Speed: 15 – 90 rpm Power supply: 400 V Fuse: 16 A Weight: 970 kg...

...The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline...

...= 170 Power force:kW 2,5 Axis force:100 daN Rapid:m/min 40 (8m/s2) Resolution:0,0125 µm Vice rotation:Electric Self-centering parallel-vice:pneumatic Clamping force:4.200 N at 6 bar Number of tools:5 milling tools Power:kW S1= 1 / S6= 3 Torque:Nm S1= 2 / S6= 4,4 Rotation speed:rpm 8'000 Machine (without any options):kg 5000 Footprint (without any options):3,5 m2...

... programs with 5 bending angles each. – Depending on the tasks to be performed, the machine can be equipped with various options: * Manual eccentric vice and fixed chuck * Eccentric clamping with hydraulic advance of the chuck * Hydraulic and automatic cycle for chuck clamping – A solid and high-performing machine, ideal for operators in hydraulic, nautical, and other general industries. – CE...

DUMETA® was founded in the early 90s in the Netherlands. Since 2014, DUMETA® has also been present in Germany. The development and manufacturing of machines for positioning and rotating workpieces is our core competency. We are convinced that there are faster, safer, and simpler ways to position, rotate, and process workpieces. Our mission is to contribute to the improvement of production process...

... axes (TRIMMER 2A or 4A), and finally, the integrated transport table in the production line. Since all machines are set up for dual-sided feeding (from the right and from the left), the flow direction of the entire line can be freely chosen during the configuration phase (from right to left or vice versa). Depending on the integrated welding machine in the line, the INTEGRA 4H can fully automate the processing of frames of variable sizes. The machine can process all standard profiles (made of acrylic and coated) with the appropriate tooling.

... the use of copying mills Ø 5 mm. This site copying milling machine is equipped with: - MONO 230 V motor. - Power 1.05 kW. - Spindle speed 29000 rpm. - Manual vice. - Manual copying finger. - Clamping chuck Ø 8 mm. Maximum capacities: - Milling: 220 / 100 / 120 mm (x y z). - Vices: 110 x 110 mm (W x H). Machine delivered without milling cutter.

...Two-Station Centers Machine with 1, 2, or 4 spindles. Achieve high productivity with complete manufacturing in two workspaces. Machining in the left workspace while loading and unloading in the right workspace simultaneously. And vice versa. As double and 4-spindle machines, the 5-series two-station centers are designed for productive series production of small and large workpieces in multiple...

... protection guard -Motor protection kit -Burr-free cutting -Automatic cutting by centering the material with the double-sided pneumatic vice control -Comes with a stop rod for repeatable cuts -Process counter -Hassle-free performance  ...

...Switching from external clamping to jaw or centric clamping in 2 minutes, without changing the clamping devices and without alignment? No problem with the jaw modules. Because the basic unit into which the jaw module is inserted is a HAINBUCH chuck or vice. If the clamping head reaches its limits because it needs to grip a larger surface, then insert one of the jaw modules. The 3-jaw module is...

...Cart for handling panels from a vertical storage rack to a horizontal or vertical saw and vice versa. The tiltable support table can be adjusted to height using a mechanical lifting system. With this cart, a single operator can safely lift, tilt, and transport panels weighing up to 250 kg. It helps save handling time and significantly reduces the risks of injury and accidents.

...Our range includes the following gripping jaws. As a direct manufacturer, we can tailor our products to meet your specific needs and deliver the exact gripping jaw that suits your requirements. We look forward to your inquiry! Gripping jaws: Workpieces with a diameter of up to 300 mm can be easily clamped. Vice jaws compatible with Allmatic and Röhm. Base jaws for 3-jaw chucks from Schunk and...

...1999 XYZ PRO 1500 CNC TURRET MILL Control - A.G.E 2 Axis CNC X & Y Variable Speed Head Spindle Taper R8 Spindle speeds to 50 - 4200 RPM Table Size 1066 x 228mm Motor 3hp Coolant Manual, collets, clamps and machine vice Year 1999 Model:PRO 1500 CNC TURRET MILL...

... rotary motion into linear motion or vice versa. Whether helical or straight, milled or hardened, hardened and ground, with quality ranging from 3 to 10, in sizes from module 1.5 to 12 – with our extensive range of racks, almost all conceivable applications can be optimally realized.

...TR4-14: Machine for abrasive disc Ø 350 mm TR4-16: Machine for abrasive disc Ø 400 mm Powerful machines for the fast and precise cutting of rails. These machines are approved by "SNCF" and ensure perfect execution of rail cuts. TECHNICAL SPECIFICATIONS: - 2-stroke gasoline engine "PARTNER" 119 cm³ = 5.8 KW - Steel vice for rails up to UIC-60 - Automatic grounding (Safety) - Chrome protective...

...Semi-automatic Horizontal Band Saw The torsion-resistant double-column construction and the stable, heavy cast frame ensure low-vibration operation. The feed of the saw frame is hydraulically adjustable. The machine automatically shuts off after the sawing process, and the saw frame returns to the adjustable starting position. The hydraulically clamping vice of the HB 280T features a handwheel...

...Robust and heavy stationary machine made of cast iron, designed for intensive work. High cutting precision thanks to the band saw guidance with multi-point blade guidance (ball bearings + carbide plate). The saw arm is adjustable for miter cuts to the left (45°) and to the right (45°/60°). Speed of descent can be adjusted using the hydraulic cylinder. Delivered with an eccentric machine vice...

... increased measurement reliability, as the common measurement point allows for direct comparison of the local display with the electric temperature sensor, and vice versa. • Installation costs for temperature measuring instruments are reduced, as only one measurement point needs to be set up for both electric temperature sensors and local temperature measurement. Design: 90° angled version, angled connector Display range: -30...50 °C, 0...60 °C, 0...100 °C, 0...120 °C, 0...160 °C, 0...200 °C...