lathe centers

...Spring-loaded design for automatic axial length compensation As an internationally operating company, we supply over a thousand customers worldwide with high-quality lathe centers, centering cones, center points, and special tools – in top quality and perfect precision.

...Self-centering high-performance centers with springs, to compensate for different centering depths and length tolerances of the workpieces at a fixed tailstock/tool turret position.

...The GEMINIS GM9 is a multifunctional lathe designed for the combination of different machining processes on a single machine.

... machining Machine, 3,4,5 axis CNC machining centers. We also equiped cold forging & hot forming production line, can produce blanks for our steel turned parts, greatly reduce the material cost, improve the processing speed and cost, improve the quality of the workpiece. According to quantity & precision requirement, optimize the turning processes to make the machining cost to be lowest. We...

...Year of manufacturing: 1998 Number of axes: 2 Stroke X axis: 180 mm Stroke Z axis: 600 mm Rapid traverse rate Z axis: 4000 mm/min Distance between centres: 600 mm Height of centers: 150 mm Max. swing over bed: 340 mm Height of centers over carriage: 177 mm Spindle nose: CAMLOCK D 1-4’’ Internal spindle nose: CM5 Spindle for collets: B32 Spindle throughbore: 40 mm Min. spindle speed: 55 rpm Max...

...The IKO Super Flexible Nozzle is a compact nozzle used on machine tools to supply and spray cutting oil exactly at a specified location. Since the angle of the nozzle can be easily changed, the oil supply can be concentrated on the working area, and cooling and lubrication can be performed effectively. As a result, cutting resistance is reduced and superior finish is obtained, achieving high machining accuracy. The tool life can also be extended, which can result in cost savings. The Super Flexible Nozzle can be used at the spindle end of machining centers and at the tool holder of an NC lathe. ...

...FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

...Our modern CNC turning centers from Mazak are capable of machining parts made from any type of steel, cast iron, and non-ferrous metals. The maximum diameter of the workpiece is 380 mm, with a maximum length of 1000 mm. The machines are equipped with bar feeders. Our products are intended for the automotive, mechanical engineering, construction, hydraulic components manufacturing, and other...

PORTPALLET is revolutionizing packaging and goods transport with metal pallets made of galvanized steel or aluminum. Our innovative pallets excel in hygiene and safety, serving industries such as chemicals, food, pharmaceuticals, agriculture, and distribution. Key features include easy cleaning, exceptional strength, versatility, eco-friendliness, and customization. We provide solutions for: Ch...

...Our core competencies include the mechanical processing of your workpieces on our machining centers and CNC lathes. Machining Center Data: • Long part machining centers up to 4500 mm • 4-axis and 5-axis machining centers up to 1000x1000x1000 mm CNC Lathe Data: • Maximum length 1250 mm • Up to diameter 750 mm...

...Series of horizontal turning centers for the highest demands. Impresses with outstanding features in terms of performance, precision, and stability. Extremely flexible.

...Distance between points: 8,000 mm Height of centers: 500 mm Ø over bed: 1,000 mm Ø over carriage: 680 mm Ø main spindle: 104 mm Speed range: 4, 0-1400 rpm Spindle power: 30 kW Total power: 45 kW Year: 2009 Equipped with: Control: FAGOR 8055 TC C-axis: Yes 4-jaw independent chuck: Ø 900 mm Boring support for 120 mm bar: Includes anti-vibration bar support Automatic turret SAUTER: square with 4...

...WORKING CAPACITY Swing over bed 460 mm Swing over carriage 274 mm Swing in gap 690 x 250 mm Distance between centers 1500 mm Width of bed 300 mm HEADSTOCK Chuck type Cam Lock 6 Chuck hole 58 mm Speed range 25 - 2000 rpm FEEDS Lead screw pitch - Longitudinal feed 0.05 - 1.7 mm/rev Cross feed 0.025 - 0.85 mm/rev Metric threading 0.2 - 14 Imperial threading 2 - 112 TPI TAILSTOCK Quill diameter 50 mm Cone CM4 Quill travel 120 mm MOTOR Main motor 4 - 5.5 kW WEIGHT AND DIMENSIONS Weight 2120 kg Dimensions (l x w x h) 2760 x 1030 x 1500 mm 12 months warranty...

...Turning diameter over bed/slides 1000mm/700mm, 2x 4-jaw chuck, Multifix steel holder device, 2 tailstocks, coolant system, year of manufacture 2007, used. Technical Data: Turning diameter over bed: 1000 mm Turning diameter over slides: 700 mm Distance between centers: 6000 mm Speed range: 1.25-400 RPM Spindle bore: 315 mm Drive power: 31 kW Approximate weight: 10000 kg Storage number: 2.1-292...

... mobile spindle: Morse No. 1 Thread of the fixed spindle: 1'' x 8 RH Weight: 20 kg This wood lathe with a distance between centers of 330 mm is equipped with a speed variator. The turning capacity is 200 mm in diameter. The cast iron bed provides strength, rigidity, and great stability. It comes with a spur center and cup center, 2 tool holders of 175 mm and 110 mm, and a 50 mm faceplate. • Its...

... digital display. - Base frame - Halogen lamp - 3-jaw chuck 160 mm - 4-jaw chuck 200 mm - Faceplate 250 mm - 2 steady rests Technical data: - Center height: 165 mm - Distance between centers: 1100 mm - Max. turning diameter: 460 mm - Spindle bore: 38 mm - Spindle taper: MK 5 - Tailstock taper: MK 3 - Spindle speed: 65 to 1810 RPM - Speeds: 18 - Main motor output: 2 kW S6 (1.5 kW S1) - Weight: 510 kg...

... cooling units are also equipped with IPM motors that enhance the performance of industrial machines. Applications DAIKIN chillers will help you save energy and gain space in applications such as: Machining center CNC lathe Grinder Special CNC machine CNC electrical discharge machine Molder Press...

... minimal setup effort. The extremely wear-resistant chrome-nickel steel segment clamping sleeve, with rubber specially developed by HAINBUCH between the segments, makes this possible. Manual drive ms spring The manual drive ms spring, in combination with the MANDO and MAXXOS segment clamping chucks, is the ideal choice for machining centers, measuring machines, and pillar drilling, parallel and angular clamping, or clamping in dividing heads.

...Ideal for Secondary Operations on lathe parts Clamp body made of mild steel for machinability Heat-treated and coated screw for long life Longer screws available for hydraulic applications The ID Xpansion™ clamp is the ideal solution to hold parts on an inside diameter for high density machining on vertical or horizontal machining centers. It can also be used as an expanding mandrel on a lathe...

...Capacity: Distance between centers: 1000 mm. Allowed diameter on the bench: 430 mm. Allowed diameter on the cross carriage: 240 mm. Diameter in the broken section: 650 mm. Width of the bench: 300 mm.

...HIGH SPEED HIGH PRECISION CNC TURNING CENTERS PRECISION CUTTING CAPABILITY Robotturn® XS Lathes models are optionally available with built-in spindle motors, which eliminate traditional belts and pulleys. This advanced turning center system provides faster spindle response, reduces vibration and power loss, which translates to faster cycle times, higher accuracy, and lower maintenance costs. (www.robotturn.com)...

... interactive museums. The available machines include a jigsaw, various versions of the lathe with a 3-jaw chuck, a hand drill and grinding machine, as well as a stationary grinding machine. Thanks to the short stroke of the saw blade, the skin moves in harmony with the saw blade and remains unharmed. The precise metal guide with the steel pusher ensures accurate guidance of the saw blade and allows for professional and precise cuts in materials such as plywood, solid wood (up to 7 mm), and balsa wood (up to 20 mm).

... Item number: 61 Center height: 200 mm Distance between centers: 1000 mm Spindle bore diameter: 82 mm Spindle nose: Cam-Lock 8" Motor power: 5.5 KW Tailstock quill diameter: 55 mm Quill travel: 150 mm Dimensions: 2120x1070x1400 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: 210 mm Spindle speed: 48 - 1600 RPM.

...Features: - Motors are TEFC (Totally enclosed fan cooled) - Stainless steel wet ends - Carbon steel coupling Applications: - CNC lathe coolants - Grinding machines - Processing centers - Heat exchangers - Industrial cleaning equipment - Reverse Osmosis - Filtering - Golf courses - Agriculture - High rise buildings - Pools - Car washes...

...Tour CAZENEUVE HB Distance between centers 1500 mm Height of centers 315 mm Diameter allowed above the bed 725 mm Diameter allowed above the tailstock 670 mm Diameter allowed above the carriage 400 mm Spindle bore 81 Taper of the tailstock M6 Maximum travel of the cross slide 400 mm Number of spindle speeds 18 Power 18 Hp Dimensions: L x W x H 3140 x 1270 x 1355 Weight 2900 Kg...

... fixed machining with those of rotational machining. The head is equipped with 2 axes: a standard milling axis for drilling, threading, and milling applications, and a U-axis rotating head for turning. The radial movement of the U-axis is capable of performing virtually any type of machining, including turning, spherical or conical turning, as well as boring and threading operations using standard tools. Turning operations can be carried out with all the functions of a standard lathe, including constant control of...

...We manufacture a variety of components on a total of 5 CNC-controlled machining centers from the brands AXA, EMCO, Hedelius, and Mazak, with sizes up to X2300 Y800 Z600mm. Machining We manufacture a variety of components on a total of 5 CNC-controlled machining centers from the brands AXA, EMCO, Hedelius, and Mazak, with sizes up to X2300 Y800 Z600mm (interference edge diameter 800 mm). Furthermore, we turn on our modern EMCO E65 lathe with automatic bar feed up to a diameter of 65mm and with manual processing up to 310mm.

... machine with 30-fold changer, brand Hermle C 20 U • Wire EDM machine, brand Mitsubishi FA 20 S Advance • Wire EDM machine, brand Mitsubishi FA 10 • Grinding machine, brand Stöckel • Drilling machines, brand Alzmetall • Sink EDM machine, brand Deckel DE 25 • Lathe, brand Colchester • CNC machine, 16-fold changer, brand Hermle 721 • Universal milling machine, brand Deckel...

..." - Ribbed cast iron bed for extreme rigidity - Sturdy cast iron machine with ribbed bed - Main spindle lubricated by oil bath and mounted on very precise tapered bearings - Operation via hardened and ground gears - Simplified speed change - Distance between centers: 1,000 mm - Center height: 180 mm - Machinable diameter over the bed: 280 mm - Spindle bore: 38 mm - Spindle Morse taper: CM 5 - Tailstock...

...Tailstock Centers for Turning and Grinding Patented system with differentiated load, featuring 2 axial bearings to ensure axial thrust significantly above average, necessary for working with the drive dog in absolute safety. 5 bearings and a very long guide for better stability and strength. This center is available in various designs. Sizes: MK2 - MK6...