material test Italy

... toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm...

...Necessary in the early stages of the project, during the prototype development phase, suitable materials for the application are selected and the components are produced using pilot equipment. The technique used allows the client to test the product with its final shape, material, and characteristics, while keeping initial investment low and execution times short.

... harvesting. In principle, it is suitable for closing bags of any material thanks to the automatic dragging. For special processes, we recommend sending us a sample of the product so that we can test the machine in real conditions of use. The maximum sewing pass thickness is 10 mm and the thread tension can be easily adjusted using a knob. It is recommended to sew material with low density so as not to...

... certification : National test bench for firearms Laptops and business missions : - Prot. No. 22 / Bal-AG / vp, November 23, 2011. MATERIAL OF THE BALLISTIC PLATE: 100% UHMWPE Shape: MULTICURVATURE UNIQUE CURVATURE Weight of the plate: 1.350 kg...

... durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:22 mm Passage...

...The snap-on beads are insulating sleeves made of steatite used to cover the wires and terminals of electrical resistors. Thanks to their rounded shape, they fit together easily, allowing for the simple covering of cables and wires while maintaining the flexibility of the cable. Material: Steatite C221 Temperature: up to 1200°C...

...approximately 1.6 -1.8 kg/m²; 1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²; 2 mm GRAIN: approximately 2.4 -2.8 kg/m²; 2.2 mm GRAIN: approximately 2.6 -3.0 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 20 kg...

... performing controller revoFACE Dynamic performing programmer Ventilation Forced ventilation fan Daylamp Sunlight Simulation Fluolamp Accelerated Plant Growing Biolamp Insect and Bacteria Incubation Arablamp Arabidopsis Accelerated Growing ICHlamp Photostability Test Alarms High/Low temperature and humidity Electric Power 220-240V ~ /50 Hz different power available 100% customizable solution ...

... exceptional choice for stability testing across industries such as Pharma, Food & Beverage, Cosmetics, and Material Testing. Moreover, they are suitable for conducting extreme tests in Automotive, Aeronautical, and various other industrial tests. GWALKIN ensure the ideal testing environments across a broad spectrum of temperatures, from sub-zero levels to high temperatures, with precise control...

...REFINED SOYBEAN OIL: Soybean grade #2, suitable for human consumption. Quality: Standard export quality. Grade: #2. Test weight: 54 pounds per bushel, min. Protein: min 35%. Moisture Content: max 13.5%. Foreign material: max 2.0%. Oil content: min 18.5%. Splits: 20% max. Total damage: 4%. Kernels: 3% max. Free fatty acids: 1% max. Discolored seeds: 2% max.

...Top contact layer made of ergonomic eco-friendly Memory Foam with a textured surface featuring 900 micro-massage points. Bottom layer made of eco-friendly WaterFoam. Support base made of high-density anti-sinking felt. Perimeter box made of high-density perforated breathable WaterFoam Ecosystem. Covering fabrics made of Oeko Test certified material with hypoallergenic breathable fiber support...

... reach 303kV/mm with reference to the ASTM-D-149-91 test method and are used within a temperature range of -50°C/+300°C. Our adhesives, carefully selected during our forty years of experience, comply with all REACH and RoHS regulations and guarantee that the original properties of the films used are fully maintained. They are used for insulation and thermal management in stator slot E-Motors, thermal protectors insulation inside electric motors, motor lead termination, compressors, in order to avoid wires ends to damage the surrounding parts...

... BS6920 and FIRE TEST REPORT F180. Product suitable for use on laminated and/or solid wooden supports. These types of supports can be very heterogeneous in structure, type, and composition. It is recommended to conduct on-site tests to assess the load-bearing capacity of the fixing point. Ease of penetration into porosities and hollow areas. Allows for secure fastening without expansion and therefore without stress on the base material, and is resistant to acids and solvents, adapting to repairs and applications on all support materials.

... machine or system, can identify defects that could lead to structural failures with serious consequences. MAIN INSPECTIONS: TOFD, Phased Array, PMI, Eddy Current Testing, Leak Test, Visual Inspection (VT), Liquid Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing, Radiographic Testing, Digitalization of Plates.

... appliances. Upon request, it provides washing and degreasing services for parts, various types of edging, drilling (both central and lateral), and also produces flanged domes, securing the flange through mechanical crimping, without the need for welding. Our Quality office is important: we can perform any type of test or measurement, particularly regarding the verification of tolerances and final thicknesses. We carry out the verification of CP-CPK values to obtain free-pass supply. The automation of systems in line with Industry 4.0 has allowed us to improve production performance.</p>...

... processing to packaging. Our Research and Development laboratory, always up-to-date to ensure effective and contemporary formulations, is the main focus of our business activities. We study and test our ideas until we achieve the most effective and safe solutions for the consumer, who is always at the center of our entrepreneurial project, following a client-oriented approach.

... Test, Charpy Impact Test, Chemical analysis of carbon and low-alloy steels, Chemical analysis of stainless steels, Transverse Tensile Test, Longitudinal Tensile Test, Transverse Bending Test, Transverse Impact Test, Macroscopic and Microscopic Examination, Vickers Hardness Test (HV10), Fracture Test. Training and qualification courses for welders and NDT.

Based in Sestu, in the province of Cagliari, M.B.T. is a successful player in the supply of pipes and materials for drilling, capable of providing quality items for geological and environmental services. To ensure our clients always receive the best, we offer top-level equipment, PVC and polyethylene pipes and filters, and drainage pipes. We only propose reliable and certified items, guaranteeing ...

... ITEMS. WE ARE EQUIPPED WITH A TEST MACHINE FOR TESTING OUR GEARS. WE DESIGN CERTIFIED TRANSMISSION COMPONENTS FOR FOOD USE (FDA), WITH FIRE RESISTANCE, AND IN COMPLIANCE WITH EN45, SELF-LUBRICATING (PTFE MOS2 ETC), LOADED WITH CARBON, MINERAL FIBERS, SILICONES, GLASS FIBER ETC, AND WE ALSO COLLABORATE WITH THE LEADING POLYMER MANUFACTURERS TO ALWAYS FIND THE BEST SOLUTION FOR OUR CUSTOMERS.

... product is handmade and sewn. Designed, crafted, and worked in our workshops in Romagna by skilled local artisans, 100% artisanal made in Italy. You can choose the type of leather, the color, and the finishes so that each product is truly yours! BubuBa items are fashionable, comfortable for any environment and activity, and sophisticated. In the history of fashion, one element in particular has withstood the test of time and the succession of various styles without ever being defeated; the most versatile and sophisticated material that nature can offer us, namely, leather.

... services. Schulz Italia fixtures are synonymous with quality and design, enhanced by a wide range of colors. The various shades complete the choice of fixtures that fit well into any living context, starting from classic tones like white and ivory, to various wood finishes, and even decorating more unique environments with red, green, and gray. Careful design, attention to material selection, and high production standards are the elements with which Schulz Italia fixtures are built. We test and guarantee our entire product range for 10 years, ensuring quality and safety of the products.

... and offer you a coffee. You can take a look at our online catalog to get an idea of our products, which, in addition to collectibles, also covers related sectors: from flags to banners and pennants. If you can’t find something, put us to the test: just send a photograph and we will reproduce any product using the original material. Besides the military sector, you will also find products for the fashion industry and accessories for store displays. It’s true we’re not a store, but something ...more!

...Porosimeter, Scintillograph, Sewer and Tank Tightness Testing, Tracer Gas Detector, Transmitting Probes, Spark Tester, Motorized Cameras, Cameras for Chimneys and Wells, Cameras for Sewer Video Inspections, Thermal Cameras, Material Corrosion Testers, Test Cases and Tightness Testing for Aqueducts and Gas Pipelines. Tool Training, Training Courses, Training Seminars, Training Workshops, Technical Consulting, Technical Feasibility Consulting, Test Field.

... according to specific technical drawings for every type of raw material: forgings, castings, shaped, etc. (A105 – LF2 – F316 – F51 – F44 – WCB – WCC - Hastelloy - Inconel – Monel - Titanium and other valve materials). We supply carbon steel LF2 raw material from full bars - 3.1 and 3.2. We carry out the pre-machining, welding overlay, and finishing after welding - Test NDT. Capelli srl specializes in...