head and tank

...With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here. Operating pressure:max. 1500 bar Max. flow rate:200 l/min...

...This is the machine used to detect invisible cracks in the Cylinder Head. Model:SKT-1250 Cover Width:360 (mm) Cover Length:1100 (mm) Cover Height:400 (mm) Cover Weight:250 (Kg) Tank capacity:500 (Lt) Heater:7.5*2 (kW) Thermostat:0-90 °C Electrical / Phase:220-380-400 V/3 Weight:500 (Kg)...

... consistent. 3. The filling head has the function of sucking back, and there is no dripping phenomenon. The bottle is not in place and not filled, ensuring misoperation and keeping the work area clean. 4. This machine has only one filling pump, one top tank and one side stand tank which can be equipped with 2~20 filling heads, and the output and filling volume can be adjusted if need. More information: When filling, the filling head presses against Measurement precision:±0.5%-1% for 5L-1L Capacity:800b/h-7200b/h Voltage:220VAC 50/60hz Air pressure:4～6㎏/㎝² Air Consumption:1m³/min Power:1000w...

...Do = outer bottom diameter Di = inner bottom diameter CR = crown radius KR = knuckle radius SF = straight flange height DH = depth of head THi = full inner bottom height t = wall thickness. Diameter:from 850-up to 5000 mm Thickness:from 3-up to 18 mm material:stainless steel (not of carbon steel)...

... pharmaceutical and biotechnology industries. Magnetic coupling Zero-G mixers are magnetically coupled through the bottom of the tank without the need for mechanical seals, minimizing the risk of cross-contamination.

... markings to place the panettones by hand and a scraper at the end to clean any remaining dough. -The machine injects four panettones at the same time and the injection is driven by a servomotor. ADVANTAGES: -Ease of use. The operator places the panettones on the marked belt and collects them at the end of the process. -Quick and easy cleaning thanks to the scraper and the removable head for complete cleaning and disinfection. -Safety in the working process. -Production increase: 400% depending on working conditions and parameters. ...

...High-capacity hands-free fountain, ideal for comfortably filling all types of bottles. Hygienic and vandal-resistant solution. Available with sensor or pedal. Superior quality, exterior and interior made of stainless steel. Operation via a single or double sturdy stainless steel pedal or automatic via sensor(s) for greater convenience. Robust and elegant integrated bottle filler in the head...

...The Level Switch LBFS is designed to detect levels in tanks, for media separation and provide empty-pipe detection or dry-run protection for pumps. A high frequency sweep signal is radiated from the sensor tip into the tank. The media will act as a virtual capacitor, which together with a coil in the sensor head, will form a circuit creating the switch point signal. This virtual capacitance will...

... towns with up to about 7000 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system. Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 150 Tank:S235JR (St37-2) Coating:2 component coating on epoxy resin basis...

...Two-wheeled cart for heavy-duty service with handle Triplex pump with ceramic pistons and Connecting rod system Automatic by-pass valve with pressure with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Pressure gauge Flanged pressure relief valve Integrated detergent suction Adjustable detergent injector Built-in detergent tank with a capacity of 3L Inspect-able water filter Electric cable length 5 m...

...FEHLMANN Picomax 54 TNC 320 - CNC Milling Machine Type of CNC: HEIDENHAIN TNC 310 Number of axes: 3 Travel axis X: 500 [mm] Travel axis Y: 260 [mm] Travel axis Z: 490 [mm] Travel of sensitive drilling head: 160 [mm] Max distance spindle/table: 610 [mm] Table length: 880 [mm] Table width: 320 [mm] Weight: 300 [Kg] Coolant tank with pump: Yes Centralized lubrication: Automatic Power supply voltage: 400 [V] Dimensions: 2200 x 2100 x 2250 Weight: 2450 [Kg]...

...The FERO-BULB type blind rivets have long been part of the high-strength blind rivet types used in large quantities, primarily in automotive construction and tank building. It holds this excellent position due to the perfect combination of the following properties: — very high shear rupture strength thanks to the remaining nail also providing a load-bearing function — wide closing head that...

...Made of AISI 304 stainless steel. AISI 304 stainless steel tank, double filters, equipped with an overflow. 4 available programs: - Washing and spinning. - Pre-wash, washing, and spinning. - Continuous washing. - Spinning. Manual water flow regulation. Lid with safety micro-switch. 45-liter stainless steel basket, 16 mm mesh. Built-in discharge pump. Retractable shower head for cleaning the built...

... rigid structure to reduce vibrations. On the base are located the central support of the filler, the motorization, and the gears that control the movements of both the screw and the bottle entry/exit stars. The isobaric tank is fixed to the cylinder flange via the height adjustment device for the tank. The filling valves are attached to the isobaric tank. Complete with a control panel featuring low-voltage buttons and thermal relays. Production: from 1,000 to 15,000 bottles/hour.

... sample bottle from various parts of the oil tank (from the top, from the middle, or from the bottom). When applying the special paste to the magnetic head of the telescopic rod (before using the equipment), free water in the oil tank can be quickly detected if the paste changes color to red. Additionally, iron filings will accumulate on the surface of the magnetic head, if present. This makes it possible to detect ongoing friction processes in the engine at an early stage.

... It is a double independent inter-row cultivator with the possibility to mount up to 13 interchangeable tools. It is a machine equipted with 5 pumps, oversized oil cooler, Self-centring system, two head's positions on each side, oil tank capable of controlling all machine movements..

... systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

...The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable...

... operation. Their modern and practical industrial design simplifies daily operation and reduces maintenance to an absolute minimum. The membrane keyboard with graphical representation of the tank, hose, and application head simplifies the programming of the five different heating zones and provides an accurate status display at a glance. The precise PID temperature control ensures exact adherence to the preset parameters. A temperature reduction conserves the adhesive during standby operation.

...Screw-in Tubular Heaters are the standard solution for all heating processes with liquids or gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54 connection head, fitting and tubular heater consists of stainless steel. The tube sheath material 1.4529 is resistant to sulphite, phosphors and hydrochloride media. Type:without controller and limiter Type:with controller (adjustable from 30 ° to 85 °C, freezing protection at 7 °C) Type:with limiter (adjusted to 110 °C) Type:with controller-limiter-combination...

...N ° 1 drilling rig brand EGT, model MD 700. Year of construction: 2001 CE certified Perkins diesel engine, power 120 hp (engine replaced in 2008) Useful stroke for rods with length l = 1500 mm Modular mast Max pull: 5 tons rotation head with max torque 1500 kgm; 3 speeds Double vice with max passage 254 mm (10 '') Hydraulic winch Control panel for drilling on articulated arm Oiler with...

...Dynamic cleaning-in-place (CIP) systems clean even the smallest corners. But what about the spray head? This question arises for nearly all cleaning-in-place installations. Most often, the shadow areas caused by added elements such as agitators, manholes, sight glasses, and many other fittings make CIP cleaning difficult. Mobile cleaning systems can address this issue, as they are automatically removed from the tank once cleaning is complete. Projection angle: 270° up Length of the head outlet (in mm): 100 / 150 / 250 / 500...

...Dough mixer of 12 kg / 17 Kg / 25 Kg / 35 Kg / 42 Kg Tilting head and removable bowl With three-phase motor Standard timer Standard wheels On request, with two-speed three-phase motor Motor available with frequency 60Hz...

... console. 1 set of dedicated ink wipers and guide rollers matching the specified printing discs. Replaceable, compact ink supply module with ink tank, pump, cooler, filters, and ink flow fine adjustment valve. Complete tacho adjustment unit. Complete accessories kit without printing discs. Electronically synchronized printing disc drive. Mechanical phase control for staggered marking. Replaceable...

... Technical Features and Areas of Use Dish Polishing Machine, are usually used for polishing parts such as steel metal tank ends, dish heads, tank covers. Special alloy grinding wheels with high durability and precisely adjustable printing mechanisms give optimal results in accordance with the shape and size of each part.

... for using the kitchen siphon It is not recommended to mix components and loads of different brands. It should not be opened if it is not empty (be sure to remove all the contents before). Cleanliness is essential for its correct operation (the parts of the silicone gasket, the spring, and the valve inside the head must be clean and wellfixed). Container it is the siphon body itself, where the mixture to be whipped is added. Tank the capacity of the siphon can be 250 ml, 0.5 liters, and 1 liter. ...

...Quick and easy tightening system. Hydraulic lift for easy positioning of heavy cylinder heads.Heat insulated stainless steel. tank EXTERNAL DIMENSIONS OF THE MACHINE:2000X1050X1600 CYLINDER HEAD LENGTH MAX:1100 mm CYLINDER HEAD WIDTH:360 mm CYLINDER HEIGHT:400 mm Weight:250 kg Tank capacity:500 It Heater:2x1Okw Thermostat:0-90 °C ELECTRIC PHASE:220-380 V/3 APPROXIMATELY WEIGHT:550 kg...

...Electropump brass body (stainless steel optional) Equipment pressure switch, manometer, and non-return valve Tank 2 liters Rotation speed 2800 rpm Power 0.37 Voltage 230 V single phase Current 2.5 Port 3/4" F Max. head 20 meters Specifications and advantages Compact suppression group TECHNOLOGY: Side channel ATEX: No PUMP TYPE: Bare FLOW RATE: 1.2 m3/h PORT: 3/4" F BODY: Brass MECHANISM: Brass PUMPING ASSEMBLY: Kits or transfer sets...

...Engine displacement of the brushcutter 45.7 cm³ Weight of the petrol brushcutter 8.9 kg Power 2100 W Carburetor Walbro Translucent tank with a capacity of 90 cL Rigid transmission Length of the transmission tube: 1465 mm Diameter of the transmission tube: 32 mm Straight shaft Asymmetrical handle with quick adjustment Offset handle support Angle drive 35° X-Torq engine Air Purge (priming pump...

...Special Hose for Tank Cleaning Special hose for tank cleaning with a rotating spray head. The unique structure prevents the hose from twisting during use. Yellow markings every 5 meters. Operating pressure: 20 bar Place pressure: 62 bar Temperature range: from -30°C to +95°C Inner core: EPDM, black, smooth Outer cover: EPDM, black, fabric-patterned Reinforcements: High-strength synthetic textile reinforcements, two stainless steel wires Bending radius: 8 x inner diameter...