guide carriage

...The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

...Sliding pad for metal profiles with clipped plastic sliding elements. With an additional indexable handle for tightening the carriage system. The sliding pads for profiles allow for low-wear linear movement of aluminum profiles with an 8 mm groove. The system is particularly resistant to dirt due to the elimination of lubrication. The maximum permissible load for a sliding pad for profiles is...

... rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request. Model:3071 à 3074 Cylinder Ø:Ø16 to Ø40 Guide rods Ø:Ø12 to Ø25 For cylinder:ISO6432 and ISO15552 Maxi carried payload:0,5 to 40 kg...

...A ball bushing guide ensures precise and particularly smooth operation of the guide carriage. Due to its design, the COPAS allows for the absorption of high moments. A ball bushing guide ensures precise and particularly smooth operation of the guide carriage. Due to its design, the COPAS allows for the absorption of high moments and is also capable of achieving a positioning accuracy of up to...

... DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees...

...maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM Weight:Kg. 300 Overall size:mm. 1280x1850x1000h...

...Semi-automatic sealing device for sealing plastic containers of all kinds and for glass sealing. • Electro-pneumatic • Stepless pressure regulation • Sealing stamp heating block, pivotable, anodized aluminum • Machined sealing plate, adaptable to heating block • Heat shield • Stabilizer • Running roller guide with sliding carriage • Container holder, optional: with stepless spindle centering (see...

... maximum of 80 °C. Miniature sliding guides are dust-resistant and particularly suitable for dry running. Order Number Fixed Bearing Order Number: 21230-2700 Order Number Floating Bearing Execution: 21230-2701 Execution L max. L2: Guide carriage with through hole...

... open operation, suitable for derinding all round cuts, such as ham, shoulder or knuckle. Advantages Optimal results: clean removal of the rind without residues Infinite adjustment of the rind/cutting thickness Equipped with two operating speeds as standard Compact, movable via fixed and guide rollers Option: Pressure rollers in various hardnesses and air pressing roller Discharge belt Special...

...Linear guide with self-supporting rail made of extruded aluminum and plastic composite-coated steel rollers. Speedy Rail is a system consisting of a self-supporting and self-aligning rail made of extruded aluminum with a hardened and deep anodized surface, as well as a roller-based carriage. The highly load-bearing system requires no maintenance or lubrication and ensures highly reliable and...

...— High loads and torque possible — Unique ball deflection system — Embedded ball return design — Size from 2 – 15 — Reinforced stainless steel cover — Dustproof design — With lubrication reservoir — MR miniature guides are available in three precision classes: Precision (P), High (H), Normal (N). — All components (rail; carriage body; balls) of the miniature guide are made from heat-treated stainless steel.

...) with electronic and independent setting for the 2 wires with Joystick; Disk bending unit; Cutting with Brushless motors; Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades; Web Teleassistance. The 'bridge' version (Opera 16 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1900°/sec Average power consumption:9 kWh...

...The aluminum profile 90 x 135 is suitable for heavy constructions of all kinds, particularly for the linear guide LB as a carriage. The profile is also designed to accommodate counterweights and hydraulic cylinders. Material: Aluminum, extruded, anodized E6/EV1 Ix: 286.480 cm4 Iy: 631.058 cm4 wx: 63.662 cm3 wy: 93.490 cm3 Weight: 8.992 kg/m Length: 6 m Packaging unit: 6 m...

...{"Connection Thread":"M27 x 1.5 mm","Article Number":"1000153003","Cutting Range":"10 - 100 mm","Shank Diameter":"20 mm","KS-Schl":"SK03","Brand":"GCE RHÖNA","Customs Tariff Number":"84689000","Additional Information":{"Delivery Contents":"1 aluminum handle, 5 welding inserts 0.5 - 9 mm, 1 spring lever cutting insert, 4 cutting nozzles (AC heating nozzle up to 100 mm), 1 guide carriage, 1 steel...

...Roller guides are economical guiding systems for low loads and subordinate guiding accuracy. They are ideally suited for harsh environmental conditions. The carriages made of anodized aluminum have 4 rollers, two of which are eccentrically mounted for play adjustment. The rails are also made of anodized aluminum and feature pressed steel shafts as guiding elements. The rollers are designed so that they and the open carriage can be combined with customer-specific profiles for custom constructions. For applications at risk of corrosion, rust-protected carriages and rails are available.

...Professional format saw with a 400 mm blade and digital control parallel guide Standard equipment and features Anodized Z4 type carriage 420x1595 mm, cutting capacity 1600 mm Max blade 400mm / 350mm with scoring blade (blade not included) Saw guard mounted on a cantilever with tube for dust extraction Scoring module 120X20mm (blade not included) Cutting height (90°) 125 mm / (45°) 90 mm 3...

...The small and compact edge processing machine with sliding carriage is designed for chamfering and grinding small to medium-sized workpieces starting with a thickness of 1 mm. The light aluminium casing, the wear-resistant and sanded guide rails, the speed regulation and the optionally available extraction sockets convince in every regard. The sliding carriage protects the workpiece surface of...

...Linear guide with ball circulating carriage, aluminum rail. Load capacity up to 130kg. Aluminum rail with ball circulating carriage housed in a stainless steel casing with plastic sealing. Suitable for loads up to 130kg. The rails of this linear guide can be easily cut to any desired length. Designation: DA0115RCH Drillings: with drillings...

...Procedure carriage for linear units Ø 18 Identification Number 2: with stainless steel clamping screw DIN 912 Aluminum plastic-coated black, RAL 9005, structure matte SW Guide hole mechanically processed Sliding bush Polyamide Cylinder screw DIN 912 Stainless steel, non-corrosive, 1.4301 Hex nuts DIN 985 Stainless steel, non-corrosive, 1.4301 Item number: GN 273.1-B18-2-SW Weight: 55 Clamping lever for d3: GN 911-M6-22 d1 hole for sliding bush: B 18 d1 hole with sliding bush: - d2: 6.5 d3: M 6 d4: M 6 d5: M 3...

...Linear unit with handwheel MATERIAL - Upper carriage, lower guide, and end plate made of anodized extruded aluminum. - Guide shafts, drive screws, and ball bearings in stainless steel. - Plastic nut. - Stainless steel fastening screws. - Black bakelite handwheel. USAGE - Combines with various accessories for use in different configuration axes. - A unique fastening technique for simple, quick, and secure assembly. - Technical specifications - Modular linear units.

... with adjustment aid Variable setting of the start position from the training position Low-noise and low-wear linear guide of the carriage Protective enclosure Training card on the device Reproducible scaled positioning aids Optionally up to 250 kg user weight Options User weight up to 250 kg Total weight block 200 kg (20 x 10 kg) SmartPanel SmartPanel with cockpit Isometric force measurement Fine adjustment 4 x 1 kg Fine adjustment 4 x 2 kg Stepless movement restriction Wobble board Foot plate Colour change Special border colour Special stitching in the padding Special padding embroidery...

...The aluminum housing of a HEIDENHAIN sealed linear encoder protects the scale, scanning carriage, and its guideway from chips, dust, and fluids. Downward-oriented elastic lips seal the housing. The scanning carriage travels along the scale on a lowfriction guide. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the...

...::Function:: Knurling of the composite zone in aluminum composite profiles using 2 hardened special knurling wheels. ::Construction:: ◾Machine stand ◾1 support roller with Vulkollan coating, D=80, L=240 ◾1 knurling head with geared motor and timing belt drive ◾1 support with precision guide carriage and adjustment spindles for height and width adjustment ◾Digital position indicator for profile height ::Technical Data:: Connection power: 1 kW Feed speed: 0.2 ... 2.5 m/s Weight: 130 kg...

...°, and tenoning. - Miter guide with table 300 x 245 mm, angle from -45° to 45°, extendable guide up to 700 mm that attaches to the carriage. 8- Parallel guide in aluminum with 2 positions: For straight cuts and angle cuts from 0 to 45°. 9- Control panel easily accessible and simple to use, ergonomic guides. The handwheels are equipped with foldable handles to avoid any obstruction. 10- Safety spindle...

... to be processed according to turntable size - Max. wrapping height (including pallet): 2,400mm - Height detection using photoelectric cell - Electronically controlled soft start and stop; frequency-controlled - Control of turntable speed with frequency converter - Lift carriage speed frequency-controlled - Turntable stop in starting position - Easy operation Type: automatic Product applications: pallets Additional features: vertical, Wrap-Around...

... depending on the application. The parallel arrangement of two pairs of rails allows for the guidance of a linear carriage. This opens up numerous new solution approaches. Advantages and features of the crossed roller guides • Compact design • Exceptional smooth operation • High rigidity • Excellent precision • Single and multiple configurations...

...Linear measurement units with roller guides FOW: open guide carriage version, FLW: closed guide carriage version with four wipers and lubrication elements High guiding precision and smooth operation Optional with installed incremental measurement system Available resolutions: 0.1 mm, 0.025 mm, and 0.01 mm The IP67 protected magnetic sensor is directly integrated and positioned correctly in the guide carriage...

...Profile slider ZN 40x80 enables the smooth guiding of a sliding element in profiles with groove 8, including 2 sliding shoes made of POM. With the included M6 hex nuts, mounting elements can be attached to the sliding carriage. No fastening materials included. Material: GD-ZN Weight: 0.044 kg Groove: 8...

...Ball circulating guides consist of a ground and hardened rail on the raceways, as well as a case-hardened guide carriage.

... for threading and turning equipped with 3 carriages on guides: longitudinal, transverse, and upper (rotating with graduation) micrometric adjustment via the handwheel protection on the upper guide protection cover for the chuck machinable diameter above the bed: 250 mm machinable diameter above the carriage: 150 mm distance between centers: 550 mm height of centers: 125 mm width of bed: 134 mm...