ground clamp

... of the GD100 precision-ground fitting and centering bushings is that they provide the same alignment as ground cylindrical pins, while significantly reducing costs due to their hollow construction. In most cases, the precision-ground fitting and centering bushing is about 50% lighter and at least 30% more cost-effective than the solid cylindrical pin.

...With a modern and robust design. Equipped with a manually operated hydraulic spindle, offering great power and clamping capacity; very agile in handling. The body of the jaws is tempered and ground, providing high precision. Suitable for heavy or light work.

... logistics system will facilitate the transport of wrapped plastic bales. Describe the project in a general way while going into more detail: 4 belt conveyors 1 hydraulic turning clamp 1 hydraulic power unit A safety system to lock the area (interlocked doors) Electrical cabinet and system...

...Available for single and double tube masts Easy & quick attachment to the tripod head Secure clamp for the mast The Mast Support Adapter enables a Rolatube System 50 tripod to be used as a support for either a System 75 or 100 mast where conditions allow. This is useful if ground pegs cannot be used. Quick and secure attachment to the tripod head is provided via a strong clamp to support the mast...

...). This is a Ready-Pack that includes a 4 m MIG gun, a ground cable with clamp, a gas hose, and solid wire rolls from 0.8 to 1.0. Equipped with wheels and a shelf for a gas bottle. Features Excellent choice for MIG welding, lift TIG, and MMA Compact and robust single-phase inverter Large digital displays and user-friendly interface Suitable for use with generators Easy polarity change Product Type: Welding Machine Reference: 297-B18260-1...

...Material: Case hardening steel. Finish: Hardened and ground. Functional surfaces ground. Note: The UNILOCK dovetail clamping pins are designed for clamping and positioning parts and devices. These clamping pins are screwed to the connecting element and are suitable for various base modules. No threading is required for securing the clamping pin, as this is done by the dovetail on a clamping edge...

... parts made of 0.75 mm profiled panels, 4 pieces per side wall Door 0.75 mm thick with vertical reinforcement strip and standard single-lever handle cylinder lock (3-point security lock) Door frame made of 1.25 mm thick steel sheet Wheel guiding rail made of 2 mm galvanized steel sheet Floor area with drill holes on all 4 sides – 8 mm diameter for fastening to the ground Material hot-dip galvanized steel sheet, subsequently powder-coated and foil-coated Roof, door, frame, sides, and back wall available in all RAL colors...

... clamp-free variants are suitable for the food industry, for instance, where dirt accumulation is not permitted. The advantages of the UNI Dicht® system, such as its high degree of sealing up to IP 68, its extraordinary tensile strength values, its suitability for EMC and Ex, and its wide range of applications, are maintained. Fittings for cables are available for: smooth flexible conduits UL stabilized conduits with a spring conduits with external steel mesh available from M16 to M50 or from Pg 7 to Pg 29...

...D-SUB Standard, solder pin, angled, 9.4 mm, twisted contacts, metal angle Mounting types: — with mounting bracket and internal thread 4-40 UNC or M3 — with mounting bracket, ground clip, and internal thread 4-40 UNC or M3 — Quality level 3 (also available in quality level 1) — Housing: tin-plated steel, optionally tin-plated brass or stainless steel Housing material: tin-plated steel, optionally tin-plated brass or stainless steel Number of poles: 9-, 15-, 25-, 37-, 50-pole. Connection type: straight/angled solder pin, press-fit pin, solder cup, wire wrap, crimp, screw clamp...

... of the additional air function. Holding torque:76 Nm Operating pressure:4 bar Shaft Diameter:50-0.01/-0.025 mm Clamping cycles:1,000,000 Mounting:In any position Material:Hardened fine-grain structural steel, inner bore ground Pneumatic medium:Dried, filtered air Operating temperature range:10 °C to 45 °C Application field:Drive shafts, Torque motors, Conveyor systems...

...The rope clamp is used to secure a wire rope at a specific point. A ground stake (e.g., type 054) or a cord nail is driven through the large eyelet. The wire is clamped tightly with the 4 wing screws, fixing the rope at this point. The rope clamp is robust and secure.

...Passive Eltex ground clamps from the 70 and the TERRACLAMP series make it easy to establish connections. The clamps are used when decanting or filling potentially explosive materials. Electrostatic charges are discharged effectively. Passive ground clamps from the TERRA-C/P, 70SG, 70PG, 70OK and 70PK series have extremely hard and sharp gripper jaws that can penetrate any coating. The clamps have...

...Ground clamp accessory kit for ARCMATIC 130L welding machine. Ground clamp kit for welding machine: 2M CU 8mm² - 150 Amp - connectors 10/25.

...Clamps and Pulls Down Component Available Ground or Serrated Low Profile Jaw for Thinner Components Vise mounted directly to the machine bed. Low profile jaw allows for more tool clearance. The actuation not only clamps the components but also pulls it down. The jaws are available in smooth or serrated. Parts CP15 and CP16 work as stop for this vise. Estimated delivery:5-7 Working Days (subject to availability)...

... construction height - Any installation position - Large adjustment range - Clamping with downward force Execution Hardened steel Blackened Clamping balls / segments hardened Raw, ground RoHS Upon request Centering clamp GN 411.3 Operable from the opposite side or for hydraulic or pneumatic actuation, centering clamp with 2 clamping elements for clamping pipes...

...T-Clamp Holder, Aluminum Form • A: with hole • W: with pin Aluminum • matte, ground MT • anodized black ELS Pin (Form W) Zinc-coated steel, blue chromated Threaded pin DIN 913 (Form A) Stainless steel, non-corrosive, 1.4301 Set screw DIN 915 (Form W) Stainless steel, non-corrosive, 1.4301 Item number: GN 483-12-20-W-ELS Weight: 51 Clamping set for d3 Form K: GN 511.1-M5-20-K Clamping set for d4 Form S: GN 511.1-M5-20-S d1: - d2: 12 d3: 8.5 d4: 5.5 d5: M 5 l1: 38 l2: 28 l3: 17 l4: 10 l5: 8 l6: 19...

... through a lifting column with manual, electric, or pneumatic operation. - Clamping: a secure manual clamping wheel on one side of the clamp ensures the barrel is held without slipping. Clamping can also be electric. - Rotation: a wheel allows for extremely precise 360° rotation of the barrel. Rotation can also be electric. -- ATEX clamp option available For food, pharmaceutical, chemical, and cosmetic industries https://www.youtube.com/watch?v=5lJVm8w6Pl0...

... stroke limitation Pressure: 5.5 - 7 bar Housing material: Stainless steel/special material forged - 1.4435; 316L; Hastelloy Nominal diameter (standard): MD30-115 Operating temperature: >= 80°C Membrane material: EPDM; TFM-EPDM laminated; TFM-EPDM two-part Connection type: Weld end; Clamp; Special connections Drive: Manual; pneumatic Sealing system: Chambered, spiral-supported membrane Surface: Ra=0.25 - 0.8; Electropolished; ground Certifications: FDA; USP; EU1935; TA-Luft...

... - finely ground sides, therefore usable on all sides\n":"- TITAN 2 K & M are vertically usable with force-translated high-pressure spindle\n","Max. Torque":"30\n","- Safety for people & machines\n":"High flexibility – the modular clamping system combines almost all possibilities of our proven models\n","Max. Clamping Force in kN":"40\n","Application Area":"- Usable horizontally & vertically...

...Heavy-duty clamps are extremely robust, handle heavy-duty clamping tasks with ease. Heavy duty to the alloy steel forging structure does not cause problems. For this reason, forged steel clamps are particularly preferred for welding and milling applications and more. Compact design, Hardened and ground surface stepped suspension bolts, hardened and H7 tolerance machined inner diameter bushings, weldable thrust arm, weldable action arm, 146 degree opening action arm to relieve workspace, Mounting base options.

... glass and cable Post model: Glass and 2 cables Diameter: 42.4 mm Section: Round Usage: As a Starting / Ending post Mounting method: Top Mounting plate: Flat Installation: On the ground (French style) on terrace, balcony, mezzanine, staircase... Height: 1010 mm with handrail 42mm Manufacturer: Erminox Place of manufacture: France Brand: Erminox...

...-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a...

... accommodating clamping jaws - Reversible jaws (accessory) with lateral thread for workpiece stops allow for a large clamping range - Good drainage of chips and coolant Material: Base body and jaw holder made of tool steel. Spindle made of high-strength special steel. Design: Base body and jaw holder hardened and ground. Material: Tool steel, steel...

...Advantages: • Saves working time - and thus costs. • Provides more safety for vehicle electronics. • No additional stripping required for attaching the ground clamp. • Optimal ground flow, as the ground connection can now be placed just centimeters away from the weld point on the body. • The welding mass or automatic ground connection simply Automatically attaches to the body through resistance...

... / max. 150 cm (telescopic in 10 cm increments) > Internal hoisting device with safety rope clamp > Easy hoisting due to double roller guide in the pole top > Standard lockable, theft-proof > Pole fittings made of high-quality plastic > Flag fabric guide via carabiner on the hoisting rope > Pole top oval, made of plastic, anthracite Material Aluminum, silver-colored, anodized E6 Ev1 Dimensions Height above ground: 5-10 m Diameter: 75-100 mm Weight: approx. 3 kg per linear meter (75 mm), approx. 4 kg per linear meter (100 mm) Ground solutions &..

... lowering ►Pole fittings made of high-quality plastic ►Standardly lockable ►Hoistable revolving arm can be retrofitted Technical data: Material: Stainless steel, 1.4301 Pole diameter: at H.A.B.: 6+7 m 76 mm at H.A.B.: 8 m 76 or 102 mm at H.A.B.: 9+10 m 102 mm Weight per linear meter: ø 76 mm: ~ 4.5 kg ø 102 mm: ~ 6.0 kg Standard surface: ground Standard pole top: oval, blue Option: oval, anthracite...

...Design: B (Contact distance 10 mm), with circuitry (with electronics) Additional features: – Sealing rings for cable diameters of 4–6 mm and 6–8 mm – Contact carrier: 2 + ground, clamp contact with wire protection spring – Electronics: LED (red) + VDR for 230 V AC/DC (bipolar) – NBR profile seal, black – Standard central screw – Individual packaging in separate parts in a polybag Item number: 613-201-0073 Housing: transparent, one-piece, connection thread M 16*1.5...

.../60% connector 35 mm²/ground clamp AL 2300 G/F/3.5m MIG/MAG manual welding torch Pressure regulator Ar/CO2 standard 3-30 l/min. Welding spray CO2 pliers No. 2 Hand shield EASY Wire spool (5 kg) 0.8 mm MAG 65...

... hoisting mechanism with rope deflection at the mast head and safety rope clamp - The mast top is available as an onion shape, (brass or chrome-colored) round head (white) or mushroom head (black) - Vertical flag fabric guidance through strap loops on the mast - Strap loop with weight to prevent the flag from blowing up the mast and for easy retrieval - Mast fittings made of high-quality...

...INCLUDES: INTERNAL AIR COMPRESSOR LINCOLN LC30 4M AIR REGULATOR AND MANOMETER INTERNAL WATER SEPARATOR GROUND CABLE AND CLAMP POWER CABLE. The Tomahawk® 30K plasma cutting system is ready for fast and precise cutting. With the 30K, forget about the grinder: just grab the torch and cut in seconds. Features: - Maximum portability: the internal air compressor allows operation in environments where...