water insulation Germany

... Mortar: 0.5% - 0.6% addition • Insulation Mortar: 0.5% - 0.6% addition • Tile Adhesive: 0.3% - 0.5% addition • Tile Grout: 0.3% - 0.5% addition • Exterior Wall Putty: 0.3% - 0.4% addition • Plastering Gypsum: 0.2% - 0.4% addition • Textured Coating: 0.5% - 1.0% addition Technical Specifications: • Appearance: White or grayish-white fluffy texture • Average Length: 500 µm • Bulk Density: 45-52 g/L...

...MB1000 Cloth is a microporous thermal insulation material with extremely low thermal conductivity, providing excellent insulation properties. This thermal insulation material is made exclusively from inorganic, oxide substances. To facilitate easy installation and adjustment, the board is wrapped in a glass fabric. MB1000 Cloth is sensitive to all wetting liquids such as water, oil, gasoline...

...The Insulation Materials division of IFA Technology GmbH offers tailored solutions for the production processes of glass and stone wool. The focus areas include: - Preparation and circulation of process water - Planning, design, construction, assembly, and commissioning of: - Systems for collecting and treating wash water from the production process. Multi-stage filtration and purification of...

...Frenzelit insulation boards are designed for use in high-temperature applications in thermal engineering, plant and furnace construction, process industry, shipping, as well as in building fire protection. The combination of materials results in high temperature resistance. The insulation boards can be processed in various ways, such as drilling, milling, grinding, and water jet cutting.

... characteristics regarding mechanical strength, oil and chemical resistance, weather resistance, water and gas tightness, as well as temperature resistance of the insulation pillows and mattresses can be specifically influenced and individually optimized. We would be happy to provide you with personal advice on this.

... water permeability 57 l/s x m² (EN ISO 11058) 21 kN/m resp. 24 kN/m max. tensile strenght longitudinal/lateral Material:PP (polypropylen) Geotextile robustness class:GRC 5 Nominal tickness:approx. 3 mm Grammage:approx. 300 g/m²...

... homogeneity, adhesion, and workability are the foundation for cost-effective installation. SILCADUR products should be stored and transported frost-free (minimum +5 °C). The shelf life of unopened containers is six months unless otherwise specified. Opened containers should be checked for suitability before further processing. SILCADUR 130 Coating Ready-to-use coating for the surface treatment of fiber products, whose creamy consistency allows for application with a brush or roller. The maximum water addition is 5%.

...{"features":["Environmentally friendly steam generation from available waste heat","Perfect complement for energy concepts with combined heat and power","High efficiency through effective bundle heat exchanger and thermal insulation","Additional efficiency gain through optionally integrated economizer","Coordinated, modular system for easy planning and quick installation"],"specifications":{"max...

...Our building sealing solutions are specifically designed to protect damp basements, foundations, and facades from both the inside and outside. This includes the creation of durable, flexible building seals in accordance with Part 4 and in alignment with Parts 5 and 6 of DIN 18195, as well as pressure water sealing according to DIN 18533. The building sealing for new constructions and also retrofitting for existing buildings provides reliable protection against rising moisture and pressing water, significantly extending the lifespan of your building.

...• Especially for automized applications • Very short, compact design, overall length including short flat nozzle 361 mm (14.2") • Installable as extension of the last axis of the robot • Overall weight including short flat nozzle 2.7 kg (6.0 lb) • No water condensation due to thermal insulation • Process reliable and wearless in permanent operation • Jetting width up to 125 mm (4.9") • For the cleaning of big surfaces in pretreatment before painting • For use with different nozzles...

...Lime and corrosion are hidden cost factors. Inevitably, these two “enemies of temperature control channels” prolong the cooling time, reduce the process safety and have a negative influence on the parts’ quality. The problem occurs insidiously in each plastic processing company, because lime and corrosion gradually build an insulation layer in the cooling channels and are thus responsible for a...

...Very good electrical insulation properties, excellent ozone and sunlight resistance, as well as good aging resistance. Good resistance to heat, hot water, steam, diluted chemicals, acids, and alkalis. No resistance to oils and gasoline. Temperature resistance: -30 to +120°C...

...suitable for harsh industrial environments. Its inherent wear resistance makes it ideal for applications with more friction and wear, such as gears and bearings. PA66 has excellent electrical insulation performance, is an excellent electrical and electronic insulation material.the water absorption of PA66 is large, and the saturated water absorption can reach more than 3%, which will affect the dimensional stability of the parts to a certain extent. PA66 is widely used in automotive, mechanical, electrical and electronic fields, often used in the manufacture of gear, bearings, connectors and other...

...Hot water heaters are designed as radiation heating boilers with downstream convection heating surfaces in a three-pass system. The piping system is surrounded by a steel sheet casing and mineral wool insulation.

... of bronze/stainless steel, in accordance with the regulations of the Drinking Water Ordinance and the recognized rules of technology such as DVGW, DIN, EN, ZSVHK, VDI, as well as the requirements of AGFW and the technical connection conditions (TAB) of the respective utility company. With thermal insulation (optional) With control cabinet Thermomatik or control via the building station Connection variants selectable Performance range according to hot water demand.

...Insulation mats for warm water underfloor heating, coated with a tear and water-resistant composite film Available in thicknesses of 20mm-50mm Advantages: Thermal conductivity group 045 Age-resistant and rot-proof Thermal and moisture protective With a grid print of 5cm Easy to process Application area: As insulation under the screed for underfloor heating Technical data: Dimensions (net): 1000 x 10000 mm Traffic loads up to 4.0 KN/m Thermal conductivity: 0.045 W/m.K Building material class B1, DIN 1402-1 Thickness mm:: 40-3 mm...

...Cellular rubber is made from natural and/or synthetic rubbers and is used in the industrial sector as a vibration damper or for sealing purposes. Cellular rubber has a closed-cell structure without an outer skin and is foamed in block form similar to foam. Due to its closed-cell structure, the material is impermeable to water and air, making it ideal for insulation and sealing applications.

... with a complex hose connection. Just place, install, connect – done! No additional equipment is needed; everything is already integrated in the Qube+ and ready to be connected: a 5-turbine VX insulation layer dryer, a water separator, a 4-phase filter system, and an effective silencer, all housed in a robust and stackable aluminum structure that clearly offers more advantages than solutions made up of multiple devices, while costing significantly less.

... in water - Polysorb® disk springs still exhibit high spring force. iglidur® Standard environment saturated in water J 18 15 A500 24 23 Increased operating temperature Increased temperatures lead to the decline of stiffening in polymers. Polysorb® disk springs exhibit a maximum spring force of 8 N even at the maximum permitted temperature of 80° C. See figure for relationship of spring force to...

...Synthetic fiber, high sound absorption rate, perfect for acoustic insulation (absorbers, acoustic partitions, etc.) PROPERTIES: • low water absorption • durable • grammage available in a wide range • anthracite or colored upon request RAW MATERIAL: • roll goods up to 1,200 mm width and up to 600 m length (depending on material thickness) FINISHING: • cut pieces • strips • die-cut parts, kiss-cut die-cut parts • self-adhesive coated...

...ISOBLOC 500 are glass wool insulation mats with varying densities. They can be equipped according to customer preferences with either light or black glass fleece lamination, or with an aluminum lamination. These products are continuously water-repellent according to DIN 18165 and, when equipped with a lamination, are additionally weather-resistant. Due to the KiIndex of > 40, these products are physiologically safe. Typical areas of application: Thermal insulation in the industrial sector, heating sector, and equipment construction.

... is a metallic seal against non-pressing water, water vapor, construction residual moisture, wind, and odors. Areas of application primarily include floor construction, flat and pitched roofs, as well as the insulation of floor slabs and roadway surfaces. HIGHEST QUALITY for decades with verified BUILDING SUPERVISION APPROVAL! P-5132/813/11-MPA BS • CE 0761 - CPD - 0186...

...FFPM Motor: AC-motor, IEC-Size 056, 4 poles, IP 55, rated voltage 240/400 V, rated frequency 100 Hz, 240 W Temperature protection: thermal contact (NC) Dimensions (L x W x H): 303 x 110 x 171 mm Weight: approx. 9,300 g Remarks: * with optional heat insulation or heating module, Customized solutions on request.

...MAGE® Roof & Building Components GmbH offers a variety of certified products in systems that provide the right solution for different requirements. Moisture can occur in construction in liquid (rain) or gaseous (water vapor) form. Additionally, residual moisture may be present in building materials (e.g., in wood). Therefore, it is essential to protect the structure and insulation from various...

... atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide...

... – voltage-resistant, thick-walled Application For insulating live plastic-insulated low-voltage cable ends 1 kV repair sleeves, tear-resistant Application For repairing cables Wall penetrations, heat-shrinkable Application Water- and gas-tight building entry for cables and pipes...

... very temperature-friendly. This allows servers, compressor systems, pumping systems or industrial machines to be installed without any problem as well as prevents condensation and protects the contents from water. ISO containers are also wind and waterproof and can be placed outdoors without any reservations. Strong sun, cold and various outside temperatures have no effect on it. Optionally, ISO containers can be equipped with a cooling unit or heating system in order to reach certain temperatures. Refrigeration containers make for the perfect insulation since the container has the same...

...In the industrial sector, asbestos boards were used for insulation for a long time. Following the ban on asbestos, these insulating materials were replaced by fiber cement. Fiber cement boards are cost-effective insulating materials made from reinforcing fibers, process fibers—such as cellulose—high-quality cements, and water. The asbestos fiber has been replaced by wollastonite, fiberglass...

...mirror heaters, PVC flexible heating mats for terrariums, beds etc, belt heaters - Flexible Polyester Heaters consist of a conductive ink between two insulation layers of polyester. The heater can be pressed on or fixed with a self-adhesive foil. Wrapped in PVC the use in liquids is possible as well. Typical standard applications are e.g. mirror heaters, water bed heaters, or low temperature room...

... strength, shear resistance, and aging resistance. It is water- and diffusion-tight, making it ideal for insulation against heat and cold in heating and insulation construction. Additional applications include sealing, fastening, and wrapping aluminum-laminated insulation materials. Rolls: 50 m Width: 6 to 1000 mm Available as die-cut parts...