silicone oils Germany

... low temperatures and change their viscosity relatively little with increasing temperature. The use of ELKALUB silicone oils for lubrication tasks is limited to sliding movements or lubrication in the lower load range. The use of silicone oils is not recommended for steel-steel pairings. The good material compatibility of ELKALUB silicone oils with many elastomers and plastics (exception: silicone materials) leads to frequent applications as release, care, or sliding agents.

...Fine bubble pipe aerator with an effective aeration length of 1,000 mm, featuring a membrane made of platinum-cured silicone and a PP support body with a connection thread R1" IG. Free of plasticizers, thus preventing hardening of the membrane. Resistant to microbiological growth and its metabolic products. Particularly smooth surface. Resistant to many oils and fats as well as proteins in...

...E-glass fabrics with a special high-temperature silicone coating are water and gas tight, as well as resistant to various chemicals, alkalis, oils, and fuels. These materials are particularly well-suited for the production of fabric compensators and as raw material for custom special designs with cleanroom requirements. Application temperature (fabric): up to 550°C Application limit temperature...

...Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The...

...The 3M™ Novec™ Contact Cleaner effectively removes oils and greases based on hydrocarbon, silicone, and fluorochemical formulations. This cleaning spray is suitable for cleaning connectors, electromechanical assemblies, fiber optic connections, relays, circuit breakers, and more. The product has excellent material compatibility and is environmentally friendly. 3M™ Novec™ Contact Cleaner has the...

... and plastics Good resistance against solvents and excellent resistance against numerous chemical agents Resistive to cold and hot water, acetone, ethanol, ethylenglycole, glycerine and methanol, most of diluted bases and acids mineral and vegetable oils and numerous organic compounds and almost all usual gases Operating temperature:-30 °C → +200 °C NLGI grade:3 Base oil viscosity (40 °C):100,000 mm²/s Evaporation loss (24h/200 °C):< 3.0 percent in weight...

...Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA...

...VOC-free, highly effective, and silicone-free corrosion protection product for effective preservation. Standard packaging: 10 l canister, 20 l canister, 60 l drum, 200 l drum Fully synthetic, acid-free, and resin-free low-viscosity corrosion protection oil, characterized by high surface activity, creep ability, and good water-displacing properties.

... water - Glycol (Antifreeze) - Hot air - Ozone - Ultraviolet Radiation (UV) Limited Applicability - Oils, Lubricants, and Greases - OAT (Organic Acid Technology) Anti... Item Number: 96110025BL Quality: Silicone Length: 1000 mm Color: Blue Inner Diameter: 25 mm Wall Thickness: 4 mm Sales Unit: Piece...

..." and is well-suited for dry skin as it promotes regeneration. Key ingredients: Caviar extract, collagen booster Palmitoyl Tripeptide 5, Q10 (high dose), Aloe Vera, Vitamins A + E, Shea Butter, Bisabolol, Almond Oil, Apricot Kernel Oil, Squalane, Panthenol. It contains no mineral oil, silicone, PEGs, or parabens.

...Goodridge braided fire sleeve is engineered for exposure to varying degrees of heat. The thick layer of self-extinguishing silicone polymer shields direct flame exposure, shedding molten metal and glass, whereas the texturized braided fibreglass insulating inner core maintains and stabilises internal temperature whilst minimising surface temperature. Resistant to lubricating oils, fuels, hydraulic fluid, acids, bases and solvents.

...INOX® Silicone Remover IX 400 is a universal solvent-based cleaner and degreaser. Due to its special composition, INOX® Silicone Remover IX 400 is particularly suitable for large surfaces. The cleaner thoroughly and effortlessly removes all silicones, greases, oils and residual waxes INOX® Silicone Remover IX 400 contains no aggressive substances and does not attack paintwork.

...Silicone spray based on special silicone oils and is particularly suitable for care (lubrication) of the zipper at chemical suits. It maintains rubber, plastic and metal Reduces friction Long-lasting separate- and sliding film Protects against freezing (temperature-resistant from -50 to +250°C Free of toxic solvents Available in 400ml spray cans.

... Standards and Technology (NIST). Generally, one to two oils cover the measurement points for checking your device. The oils are supplied in glass containers (approximately 500 ml) with a calibration certificate. FEATURES & BENEFITS Accuracy: ±1% Excellent temperature resistance Suitable for Brookfield and most other rotational viscometers Outstanding value for money...

...Multipurpose Spray WD-40 SD400ml with Smart Straw, silicone- and resin-free Rust protection, cleaning, corrosion protection, lubrication, contact...

...A silicone-free maintenance and care oil. It contains no harmful substances such as: chlorinated hydrocarbons, CFCs, lead, or cadmium. As moisture is undermined and displaced, metallic surfaces are better protected against corrosion. It cares for and protects aluminum without affecting rubber, paints, or plastics. It prevents tension and current losses. TC 7 dissolves rust and cleans even stubborn dirt, eliminates squeaking and creaking, and penetrates even the tightest tolerances, lubricating without greasing.

... Easy application on uneven, wet, dirty, and greasy surfaces Resistant to fuels, oils, acids, solvents, saltwater, ozone, and de-icing salt Insulating electrical wiring Processing Instructions The optimal processing temperature is between 0°C and +30°C. The surface must be clean, free of grease and dirt. Avoid contact with the adhesive surfaces to ensure maximum adhesion. The initial pressure should be applied with...

...MD-MMDT-80 Marston Universal Sealant Tube | 85 g Tube Durable, silicone-free, and isocyanate-free polyurethane sealant with high adhesive properties. This polyurethane sealant is characterized by its ability to withstand high thermal stress and resistance to mineral oils and a variety of synthetic oils. Additionally, it is resistant to lubricants, additives, fuels, air and gases, as well as...

...Application Areas: Lifting Drives / Scissor Lifts, Heavy-Duty Applications - Quiet belt operation due to profiling of the running side - Thickness tolerances of +/- 0.05 mm for uniform winding processes - High positioning accuracy with low elongation - Temperature range from -25 to +85 degrees, temporarily up to 110 degrees Celsius - Good resistance to oils, lubricants, and ozone - Silicone-free and paint-compatible versions available - Extensive stock program, good availability...

...Silicone-free glove surface - Oeko-Tex Standard 100 - Food safe due to RAL approval, food safety according to EU 1935/2004 Coated cotton gloves "Sahara" - Silicone-free glove surface - Oeko-Tex Standard 100 - Food safe due to RAL approval, food safety according to EU 1935/2004 - High mechanical resistance - Moisture-repellent - Resistant to oils, fats, fuels, acids, and alkalis - Good grip when working with wet, oily parts - Good fit, knitted cuff - Back of the hand free, lightweight and flexible, breathable - Good tactile sensitivity - Washable up to 40°C...

... line for high requirements. Recommended media: Water and water-oil emulsions, hydraulic fluids based on mineral oil, antifreeze, lubricating oils, air, and more. Advantages: - Hose is made in one piece (no additional coatings necessary), resulting in significantly better handling in tight spaces. - No risk of injury from protruding wires or burns. - Low thermal conductivity due to silicone cover. - Very small bending radius. - Suitable for water with additives as well as thermal oils. - Smooth, easy-to-clean silicone cover.

...Dirt-Repellent Hand Protection Cream for strongly adhering oily or dry contaminants, e.g., from used oils, paints, colors, tar, soot, and bitumen • prevents the adhesion of dirt particles • significantly facilitates hand cleaning • increases grip on hands • silicone-free • scented • with dirt-binding emulsifiers • contains glycerin and allantoin...

...Hand and Body Care Lotion for All Skin Types - Absorbs well, providing a pleasant skin feel - Lightly moisturizing lotion - Contains natural oils and beeswax - Promotes skin regeneration - Suitable for hands, face, and body - Lightly scented, silicone-free Item No.: 10202 Packaging / Content: 12 x 1000 ml hard bottle...

...COVER WINDOW - Aerosol - Professional Cleaning Foam COVER WINDOW - SUPER ADHESIVE FOAM effortlessly and largely automatically removes environmental deposits, oils, fats, silicone, and rubber abrasion, as well as flies and insects from painted surfaces, especially from windows, Plexiglas, and glass. It does not attack stainless steel, rubber, plastic, glass, tiles, painted surfaces, or Resopal. Suitable for cleaning vehicles, trucks, buses, helicopters, etc., both indoors and outdoors.

... tear-resistant and thus offers excellent protection against machining debris, oils, and coolant emulsions. Contact us about the use of roll-up covers in your machine systems and let us advise you on the most suitable design for your needs. GEKATEC delivers roll-up covers tailored specifically to your application requirements.

... removes even stubborn dirt (e.g., blood, proteins, distillation residues, oils, fats, tar, waxes, faucet greases, silicone, and resins) • has high material compatibility • free from caustic alkalis and chlorine • does not attack gradings and does not affect sensitive laboratory tests • the appropriate measuring cup (No. 20000623) can be requested free of charge...

...01. Special Lubricating Oil "Turmofluid 40 B" For all conveyor chains from -30 ° to +250 ° C Good viscosity behavior, low evaporation, high load-carrying capacity, silicone-free, high wear protection, oxidation stable. Viscosity index DIN ISO 2909: 160 Evaporation loss: 2 wt. % Original packaging 6 x 1.0 l can, 5.0 l canister, 400 ml spray can...

...The Arctic Silver 5 is the successor to the well-known Arctic Silver 3, which has proven its performance in many tests. New in the Arctic Silver 5 is the reduced particle size and the blend of non-silicone synthetic oils, which offers improved stability compared to the Arctic Silver 3. In addition to its excellent thermal conductivity, the AS5 can better compensate for fine unevenness, resulting...

... suggests, is free from skin-irritating artificial additives. The new natural cosmetics line shows that you can have it all. Skin-soothing and moisturizing ingredients and active substances promote the regeneration of stressed skin. The entire line is free from mineral and silicone oils, PEGs, chemical emulsifiers, synthetic colorants and fragrances, and preservatives.

...Water-miscible, mineral oil-based, chlorine-free cooling lubricant, universally applicable. Contains special additives against bacterial contamination. - Good stability and excellent corrosion protection - High washing and rinsing activity - Contains no silicone oils - Boric acid and amine free Packaging: 18Kg, 180Kg...