products screws Germany

...with square head, similar to DIN 603 STANDARD MATERIAL Polyamide Alternatively, we also manufacture these screws from other materials such as PP, PVDF, PEEK, or glass fiber reinforced up to 50%. Other material qualities and dimensions available upon request. COLOR Natural Other RAL or custom colors available upon request.

For over 25 years, ANKURO has been supplying semi-finished products, products, and services related to high-performance materials, specifically the so-called refractory metals. We supply and process titanium and titanium alloys, tantalum, molybdenum, TZM, zirconium + zirconium alloys, tungsten, as well as nickel and cobalt and their alloys. We can also assist with other non-ferrous metals such as ...

...conveyor technology, food technology, vehicle construction, and medical technology. For example, components such as chain guides, sliding rails, conveyor screws, and conveyor stars are made from PE 1000. For further technical information, please refer to our data sheet.

... special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

...ARA-T reliably supplies you with screws, nuts, washers, threaded pins, and threaded rods according to DIN, ISO, and custom specifications. If desired, the color of the fasteners can be changed, for example, through anodizing. Of course, we also deliver all described products in other materials, such as stainless steel or nickel/cobalt alloys (e.g., 2.4605 or 2.4105 or 2.0853, etc.), as well as tantalum, molybdenum, or other sintered alloys.

...Flash dryers are used to produce fine-grained or powdery materials when short residence times are suitable. The product is dried in a continuous process within a swirling hot air stream. Various feeding devices are available for the wet starting material, tailored to the specific product characteristics and throughput quantities. These include feed screws (for non-abrasive and crumbly products...

...Adjustable glides and threaded plug: adjustable glides, anti-slip plug for variable speed gliders, threaded plug, Expander plug, adjustment screws, screw caps, Escutcheons...

... the panels to be glue-bonded at the profiled edges at all times. A felt substrate layer (or similar) is used as a footfall sound insulator and increases walking comfort. Furthermore, a vapor diffusion barrier must be installed under the floorboard. As an additional installation option, the panels can be mounted to floor beams for modernization work on old structures. For this application, the panels are also bonded to each other with glue and are additionally mounted to the sub-structure with screws.

...Semi-finished products in stock. Perfect for small transfer radii. Each positively driven belt has its own special sprocket design. By varying the number of teeth (pitch diameter), the belt width, and the bore, many different sprockets can be produced. Pitch: 3.8 – 19.05 mm Tooth height: 3.7 – 16.93 mm...

... options for custom plastic conveying screws – whether single-screw separators, grouping screws, 1-in-2 strand screws, 2-in-1 strand screws, dosing and conveying screws, reversing screws, or reversing grouping screws. All of them transport goods steadily, quickly, and gently.

We are manufacturers of turned parts, our company has been in operation for over 50 years and has been family-owned since its founding. The primary goal of our well-trained staff is quality and flexibility. Processing materials: Brass, copper, steel, special alloys, and aluminum - in dimensions Ø 3-25 mm - Our machinery: - 13 Hydromat HW20/10 - 4 Hydromat HW25/12 - 1 Tsugami NP17 Our strength: ...

...Endless spirals are pressed out of one piece. Please note that due to this process, the wall thickness in the area of the bore is double the thickness as on the outside. The standard length of the spiral spirals is approx. 3,000 mm and are available from stock in the following materials: S235JRG2 and stainless steel 1.4301 (grade 304), on left or right hand pitch. Custom-made products are available upon request.

...Press-fit threaded bolts (blind rivet screws) are fasteners that feature a knurling under the head, which compresses the material into the rivet ring when inserted into the sheet metal, securing the fastening element. Advantages: • high resistance to torque loads • no damage to coated surfaces – ideally suited for sheet metal • always perpendicular to the sheet • head flush with the sheet after installation Material 1: Steel Material 2: Stainless Steel A2...

...Bolts, nuts, threaded pins and washers made from molybdenum, tantalum and titanium. You can purchase cylinder bolts and countersunk screws, various threaded pins or nuts from us – to either standardised or individual specifications. We have an extensive stock of standardised parts in sizes M1 to M10 made from molybdenum, tantalum and titanium.

...Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

For over 25 years, we have been active in the field of tool standards for mold making and stamping technology. Fast disposition, high product availability through our well-stocked warehouse, reliable delivery, and the highest quality standards ultimately lead to the success of our customers in tool and mold making. In 2010, HSB LAMBERT GmbH became HSB NORMALIEN GmbH, thereby completing the range ...

... designed to reduce the transmission of noise through the air and vibrations through the ground in small and large power generation and distribution projects. Isolation pads lower noise levels by absorbing vibrations and helping to reduce the amplification of audible sound through the casing. Additionally, since the pads are installed without screws or fastening devices, there is no possibility of them being a source of noise generation. They are resistant to degradation.

...Discover our range of high-quality screws, through screws, eye screws, dowels, and much more now! As a wholesaler for surplus goods, we offer you a wide selection of various products at unbeatable prices. These products come from a trusted manufacturer and are particularly durable and reliable, so you can be sure that your constructions, repairs, projects, and other applications will be stable...

...Thread forming screws manufactured from turned parts – direct screwing - The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high...

...,stainless steel valve, copper machined plate, brass bush, brass sleeve, brass nut in nickel plated,copper screws, red anodized aluminium holder, blue anodized aluminium CNC milling plate, anodized mechanical parts, copper gold plating handle, zinc plated screws, custom made CNC turned part,ShenZhen mechanical parts supplier, critical cnc machining parts, precision mechanical parts, mechanical parts for camera, Stainless steel high polishing part, pump and valve mechanical accessories, Optic mechanical products, High quality precision machining parts, Nitrating steel shaft,machined mechanical ...

...-finished products, such as shrink tubes, compressor plates, screws, fittings, and much more. Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used as a substitute for metal or other types of plastic. PEEK has a temperature resistance of up to 240°C and exceptional resistance to chemicals. Moreover, PEEK is self-lubricating and can be recycled.

... standardized precision parts but also a variety of titanium turned parts and other custom components precisely according to customer specifications. Customers from various industries rely on the renowned quality of 'alstertaler schrauben' when it comes to titanium turned parts and more. Convince yourself of our range of services and take advantage of our screws, precision turned parts, and other titanium-made products!

... with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak Torque indication via Memory Pointer - Coloured dial plate - Accuracy and calibration compliant to ISO 6789 type I class D - Tool insert 1/4 inch Shipping List: - Screwdriver FTD-S - Traceable Calibration Certificate (ISO/JIS) - Operating Manual Options: - Models with metric scale (gf·m, kgf·m) on request. Related Products Insert Bits with 1/4“ hex drive acc. DIN 3126 E6.3...

...This product line of linear checkweighers is designed to fit all types of packaging machines, bowl feeders, or simply for manual filling of bags. Available with 1, 2, or 3 weighing cups. This product line of linear checkweighers is designed to fit all types of packaging machines, bowl feeders, or simply for manual filling of bags. These scales are compatible with a variety of products: - Candy - Cakes - Chocolate - Coffee - Rice - Detergent - Screws and nuts - Confetti ... All parts that come into contact with the product are made of food-grade stainless steel and are easily removable.

...This package for mounting two modules on a facade, wall, or wooden batten consists of: 2x 3500mm MegaSol LOCKIN U30 beams, custom cut 8x MegaSol LOCKIN connectors 16x thin sheet screws 4x MegaSol LOCKIN end plates U30 (set) including screws Compatibility: all modules with a frame height of 30mm are compatible! you can order the suitable modules directly here in the shop.

...Manufacturing Program Our manufacturing program includes standard parts as well as custom parts that we produce according to drawings or samples. The standard products are available from stock. Here is an overview of our technical capabilities: Dimension Range: M 8 - M 42 Strength Classes: 5.6 - 8.8 - 10.9 - 12.9 Materials: Quenched and tempered steels, case-hardening steels, free-cutting steels, stainless steels...

... wire bending machines. We would be pleased to receive your inquiry. To make it as easy as possible for you, we have provided a request form on our homepage (www.gs-befestigungstechnik.de). You can find it under the menu item "Products" and the sub-item "Inquiry." Here, you will find a PDF that you can simply fill out and send back to us. We are also happy to offer you small quantities.

...At IFA Technology we use all types of pumps available on the market for conveying liquids. We consider all necessary requirements for the safe and reliable conveyance of your products. Solids can be conveyed mechanically, pneumatically and hydraulically. For mechanical conveying, screws, conveyor belts, elevators, vibratory troughs or tube chain conveyors are used. Pneumatic conveying is mainly...

... bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm. Inlay The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw.

...The American form is the cost-effective alternative to standardized DIN screws. A threaded pin is pressed into the cold-pressed wing nut. This form is predominantly used in end products that are sold solely based on price. Available from M3x6 – M12x60 from stock On request: Special lengths and custom thread ends With a collar below the wing head, also available without a collar upon request...