stainless steel heating Germany

...The non-densified standard cartridge is an economical alternative to the high-density heating cartridge, with a maximum surface load of 5 W/cm² and a maximum operating temperature of 500° C. It is suitable for simple applications but is not recommended for tools subjected to heavy mechanical stress (e.g., vibrations). Available dimensions Diameter Stainless Steel: 9.5 mm, 10 mm, 12 mm, 12.5 mm, 12.7 mm, 14 mm, 14.7 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 23 mm, 25 mm, 25.4 mm Brass: 11 mm, 14 mm, 16 mm, 19 mm, 20 mm, 22 mm, 24 mm, 25 mm, 30 mm Lengths 40 mm to 2,000 mm (+/- 2 mm)...

...Heating floor for indirect heating tailored to customer specifications. Easy to install, excellent corrosion resistance, high thermal conductivity, etc. Inquire now! This technology consists of installable units made up of a carrier element (stainless steel), one or more tubular heating elements, and, if necessary, a temperature controller and possibly a temperature limiter. The tubular heating...

...For vertical and horizontal installation, unheated zones with 2 heating outputs or 3-phase with 3 connection bolts, casing: made of steel or stainless steel with threaded flange Application: Heating, e.g., for: Ultrasonic baths Hydraulic oil tanks galvanic baths Drying cabinets Painting ovens Commercial baking ovens Liquid containers Night storage heaters...

... customer-supplied hose lines into our heating solutions. A small selection of possible product options is listed below: • Robust PU spiral hose • Metal mesh made of stainless steel or in a galvanized version • Inner hoses in three different pressure classes • Food-grade inner hoses • A variety of different connection fittings...

...The Gowoll garden dome is made of recycled and recyclable polycarbonate, which was specially developed for our Gowoll garden dome. The rings are made of light and rust-proof aluminum and the screws are made of stainless steel and are therefore also rust-proof. The special honeycomb module allows you to easily install air conditioning or even a fireplace, while electric heating options and a...

...protective cap with sealing eye. Distribution connection block with 1 ½" male thread and 1" female thread, plus four additional ½" drill holes for, e.g., air vents, filling and emptying valve. Distribution connection possible from the left or right. Distribution outlet with ¾" male thread plastic and plastic compression fitting for PE pipe Ø 20 or 25 mm. Threaded rods and nuts made of stainless steel. Delivery of individual parts as a modular system or as a fully assembled and pressure-tested complete distributor with or without accessories.

...Heating plates made of copper, stainless steel, or composite metals for laboratory equipment must be heat-resistant, chemically resistant, and above all, easy to clean. The smooth, pore-free surface can be easily disinfected when necessary.

...Available diameters: 4.0 to 53 mm Pipe jacket materials: Stainless steel, steel, and brass Lengths: up to 6000 mm...

... steel flue for fire safety and a special heating boiler for increased demands. The integrated dual-fuel burner is capable of burning both oil and gas. With the installed tank heater, the internal safety oil tank system is maintained at temperature. This ensures reliable operation with heating oil under all temperature conditions and guarantees a smooth process. If the existing tank volume is insufficient, external oil tank systems can be connected.

...Series: Automatic Segment Shutdown System, LCD Thermostat, Frost Protection, Mounting Kit, Stainless Steel Aluminum Housing 2000 Watts 2400 Watts 3000 Watts Width: 138 cm Weight: 44 kg Options: Control Knob Thermostat Wireless Thermostat GSM Control Accessories: Mobile Set: Wheels & Stand Towel Holder Stand Consoles for Anchoring...

...Control humidity and moisture with one of our 1600 m³/h industrial dehumidifiers. This robust device combines elegant design with excellent performance. Sturdy equipment for the rental market. Discreet stainless steel housing. Integrated heating control ensures maximum efficiency year-round. A remote-controlled humidity regulator is available upon request. A cost-effective way to reduce the...

...Stainless steel shelves (2m high) with integrated charging stations allow for the simultaneous heating of up to 8 thermal bags while ensuring a constant operating temperature. These shelves are available in two variants: one version with 6 bags and another with 8 bags. The number of heated bags on the shelf can be flexibly adjusted to meet individual requirements.

...High-quality quality through stainless steel! Material: Stainless steel AISI 316L (EN 1.4404) Including insulation: Up to 500 liters: 75 mm rigid foam and 5 mm film cover (removable) in RAL 9006 silver, pre-assembled 800-1000 liters: 120 mm GREEN LINE insulation, 100 mm lid insulation, bottom insulation, and 5 mm film cover in RAL 9006 silver, removable Operating pressure: max. 10 bar...

...-cooled climate devices, as well as plate heat exchangers and rotary heat exchangers. Dryers, such as stainless steel continuous band dryers, are also available at Brand GmbH. All devices are thoroughly tested for functionality, and knowledgeable staff are happy to provide advice on proper operation and use of the equipment.

...Fittings, decorative items, die-cast parts, facade elements, window grills, window profiles, garden gates, heating enclosures, automotive parts, agricultural machine parts, frame parts Welded and steel constructions, stair railings, stainless steel railings, fencing systems, among others.

...High-speed paint stripping agent - No heating and circulation required - Only re-sharpening - no replacement necessary - Stripping tank specifically for cold stripping - Membrane pump and filter system for automated cleaning - With lifting system for rims - V4A stainless steel...

... heaters as standard with Cr-Ni smooth tube heating elements. For a lower surface temperature, we offer finned heating elements. They are secured with stainless steel nipples, which can be either pressed or soldered.

...Hot air drying centrifuge in stainless steel design. Especially suitable for drying small parts and sensitive workpieces in wire mesh baskets. Advantages: - Very short drying times - Less heating energy due to high air throughput...

...with an energy efficiency class A for heating and hot water. Its compact design allows for installation even in low spaces. Cascade configuration with a nominal heat output of up to 6x99 kW. Inox radial heat exchanger for 98% efficiency, stainless steel MatriX fabric for long burner life. Lambda Pro Control Plus automatically adjusts combustion to different gas types. Low maintenance costs due to long inspection intervals. Ideal for multi-family homes, commercial use, and public institutions.

... lengths - Compact depth with high performance, even in low-temperature operation - Whisper-quiet EC technology Applications Areas of buildings where effective room heating and cold air shielding are required. In combination with modern heating systems, the Katherm QK can achieve effective, energy-saving heating. Convection: EC cross-flow fan Heating: PWW KaControl: Integrated System: 2-pipe Grille designs: Roll or linear grille in aluminum, brass, bar spacing 12 mm (9 mm optional); stainless steel, bar spacing 10.5 mm Heat output [W]: 437 - 6025 (at PWW 75 / 65 °C, tL1 = 20 °C)...

...The DYNA-if 1 HK expansion set is ideal for extending the heating circuit on a stainless steel distributor. The expansion set is needed for the subsequent or additional installation of another heating circuit on the distributor; you simply need to unscrew the distributor end pieces and replace them with the expansion set.

...The KLETTI hot glue hose for industrial robots features a special and particularly sturdy, waterproof outer jacket and a unique protective element for the internal temperature sensor. The design is tailored to the application in indoor or outdoor environments. For KLETTI standard heating hoses, we offer polyamide braiding as well as various types of PA and TPE corrugated hoses. Additionally, KLETTI provides galvanized metal or stainless steel braiding.

... Proven technology with a new product concept and attractive price-performance ratio The consistent further development of proven technology is a hallmark of MIXACO. This also applies to our heating/cooling mixers. The product line has been redesigned following a comprehensive analysis of all components. With this concept, we can significantly reduce delivery times for heating/cooling mixers while also accommodating all individual adjustments according to the specific requirements of our customers. Base: Normal steel Product-contacting: Stainless steel...

...Screw-in heating element of your choice with stainless steel connection hood. The connection hood can be equipped with a thermostat or without it. Screw-in nipple as desired: 9KW...

... products. "Made in Germany" ThermSys offers all common mineral-insulated (MI) jacket heating conductors with outer jacket diameters ranging from 0.5mm to 6.5mm, with standard jacket material made of stainless steel up to 700°C (e.g., 1.4301, 1.4306, 1.4404, 1.4541, 1.4571) or with nickel-based alloy 2.4816 (Inconel 600) up to 1000°C jacket temperature. Special jacket materials such as 1.4845, Inconel 625, Inconel 800, and others can be manufactured upon special request.

...Sample Concentrator (Evaporator) system Type EVA-EC2-L for 48 Samples (Test tubes) The complete system for smooth sample concentration with nitrogen comprises: Evaporator unit with 48 stainless steel cannulas, Metalblock-Thermostat EC-2V-130, Heating block HB-EC2-48-16 for 48 testtubes hole Ø: 16,2 mm, hole depth: 65 mm, bottom: round Obviously you can get such a system with heating blocks to your needs. Please contact us: Tel. +49 5205 87963-0 e-mail: info@vlmgmbh.de...

... – optionally made of high-quality V4A stainless steel – through a heated drying tunnel. You can adjust the temperature and speed of the conveyor belt continuously. As an optional feature, you receive a high-pressure air knife that blows out residual water from the workpieces before drying, as well as an extension of the conveyor belt for easier loading and unloading of the workpieces. Technologies: Hot air dryer Function: Continuous drying Application: For industrial applications...

...Highlights: - Easy matrix change through conical matrix seat - User-friendly due to simple yet robust design - Maintenance-friendly with good access - Reliable and durable - Precision down to the detail - Central lubrication - Slip monitoring - All product-contacting parts made of stainless steel (AISI 304) Frequent product changes, fluctuations in raw materials, new formulations, and changes in...

... of the brushed stainless steel cover, the heating blower is ideal as a heater for individual cabins in boats or caravans. This also provides the advantage of uniform heat distribution in the boat, not just for larger yachts or motorhomes. • Operating Voltage: 12 Volt DC (14.5 Volt max.) • Electrical Power Consumption: 5W at 12 Volt • Heat Output: 1000W • Dimensions: WxHxD 148 x 148 x 67 mm • Water Connection: Ø = 13 mm • Operating Noise: < 40 dB(A)...

... manufactured in a variety of diameters. The following list only includes the most common sizes, but many intermediate dimensions are also possible. I. Metric dimensions 4 mm 6.5 mm 8 mm 10 mm 12.5 mm 16 mm 20 mm 25 mm 32 mm II. Imperial dimensions 1/4" (6.35 mm) 3/8" (9.53 mm) 1/2" (12.7 mm) 3/4" (19.05 mm) 1" (25.4 mm) Nowadays, electric heating cartridges are predominantly made of stainless steel. However, due to historical reasons, heating cartridges with a brass casing can still be found. The disadvantage of brass is its poorer resistance to...