oil filtration Germany

... bacteria, dust, allergens, viruses, germs, EN 149:2001+A1:2009 A KN95 / FFP2 mask protects the wearer from inhaling airborne hazardous substances, such as small particles based on oil or water. The masks are made from high-performance filter material. Single packaging VE 100 or VE 1,000 possible...

...CBD production THC-free oils as white or private label, tested and made from EU-certified industrial hemp 1 - 30% CBD content CO2, alcohol, or UV filtration methods...

... tanks. - Integrated bath maintenance through 2-stage distillation with automatic waste oil discharge. - Depending on the equipment, suitable for intermediate cleaning or high-quality cleaning at the end of the process chain. Cleaning with solvents under full vacuum: The ideal solution for parts that are heavily contaminated with oil or grease, such as turned, stamped, or formed components. The MULTICLEAN series for solvent cleaning under full vacuum includes three different models – tailored to the needs of various application cases.

... but supported. This anti-tear principle enables the use of extremely thin and thus more affordable fleeces, ensuring maximum process reliability. Reduced fleece consumption: The POLO inclined bed filter SB operates with an endless transport chain that gently supports the filter fleece. An extremely deep filter trough is formed, resulting in a high liquid level. This significantly limits fleece consumption. The filtration process is safe and efficient. Flow rate for emulsion: 170 - 800 l/min Flow rate for oil: 85 - 400 l/min...

... protection against solid and liquid particles from harmful, low-toxicity substances that can occur up to 10 times the MAK or TRK value, with the filter material's penetration rate not exceeding 2% oil mist and the average total leakage not exceeding 8%. Solid and liquid particles from low-toxicity substances have a MAK value greater than or equal to 0.1 mg/m3.

...Media preparation, oil separators, bag and candle filters, band filters, edge gap filters, membrane filtration, chemical-physical water treatment...

...Resource conservation is also a priority. The processed material brass is 100% recycled through the return of chips. A central oil circulation system for supplying the manufacturing machines and the filtration of the used oil minimize the need for new purchases. 90% of the products are delivered in reusable containers, while the remaining 10% are shipped in recyclable packaging. #Kreislauf #Nachhaltig #Recling #Umwelt...

...Filter foam PPI 20, polyester, black, approximately 15 mm thick. It is primarily used in technical applications related to air filtration, sound insulation, oil, and solvents. Polyester filter foam is particularly suitable for oil and solvent-based applications. Due to its more regular cell structure, polyester filter foam is an ideal medium for filtration and pre-filtration in ventilation and...

...Pre-filtration for oil and grease vapors, washing solutions, cleaning systems (used and stainless steel versions).

...API Separator These separators treat and remove about 80% of the free oil from oily-water with more than 150 µm of particle size dimension.

...Compressed air filters (compressed air filtration) allow for the reduction of residual oil content to as low as 0.005 mg/m³ of compressed air. The particle size can be reduced to a filtration degree of up to 0.01 micron (µm). This ensures optimal production processes. High compressed air quality is crucial in production processes across all sectors. Filtration for the food industry and...

...Contract pressing of various oils using the cold pressing method - Organic or conventional Contract pressing of various oilseeds using the cold pressing method: - Conventional or organic options available on different equipment - Various raw materials/oilseeds can be processed - Clarification through sedimentation or filtration - Bottling of the oil in desired containers (cans, IBCs, bottles, etc.) - Press cake can also be packaged in desired containers...

...APODIS 3D high-performance filter nonwovens have been established in the market for years for the fine filtration of oil and water-miscible cooling lubricants. Our 3D filter nonwoven range includes 2 types of nonwovens with many different fineness grades. The first generation of our high-performance filter nonwovens has been established in the market for years for the fine filtration of oil and...

... applications. Special Features Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force dynamically balanced gear Gear unit with forced lubrication and oil cooling gear ratios i = 3.40 - 4.10 - 4.69 - 5.19 - 6.03 Also available to API 674, including vertical operation Filtration up to 350 µm Special media such as seawater, glycol, methanol, oils etc. on request Pressure:max. 3500 bar Flow:max. 3482 l/min Power input:max. 1000 kW Weight:3650 kg...

...Dust extraction systems with air capacities ranging from 400 to 12,000 m³/h ensure cleanliness in the workplace. Dust extraction and filtration systems model series Robust dust extraction systems available with either compressed air cleaned cartridge filters, mechanically or electrically cleaned bag filters, as well as hose filters and oil mist separators. Upon request, we can also provide you with the appropriate extraction and grinding table for your dust extraction system, optionally featuring switchable upper and lower extraction, sound insulation, and rigid or swiveling side walls.

... application range from contaminated to heavily contaminated media, aqueous to oily emulsions (both synthetic and mineral oil-based), and media with low to increased solid content. They are also used for the transport of various industrial liquids, such as low-viscosity cooling and cutting oils, (deionized) water, as well as alkalis and acids. For air-contaminated media, versions with a suction design are available. The major advantages of these pumps are their low maintenance requirements, high operational reliability, and the wide range of available immersion depths.

...Standard equipped with a basket made of galvanized carbon steel with micro-perforation, an electric level sensor, and an additional filter for filtration at 300 microns, which allows liquids (oil, emulsions, etc.) to drain to the bottom of the container. The filtration of coolants, lubricants, and oils from machine tools is no longer a problem. The RAM industrial vacuum cleaner with three-phase power supply is designed for sucking up and separating liquids mixed with solids. It filters the liquids and returns them to the machine tool's circulation.

...Submersible vortex pumps of the FT/FTA series are designed as recovery pumps for filtration. It is also possible to convey medium chips. Impellers: semi-open Fluid: coolant, emulsion, oil Volumetric flow rate: up to 200 l/min Head: up to 6.5 m Examples of use: - emulsion and chips - boosting pump - recovery pumps for chips of different materials Pumped product: for coolant liquids, emulsion, oil Drive: electric Priming: semi-submerged Technology: vortex Sector: industrial, for machine tools Other features: lifting, for cutting fluid...

...The lift bottom centrifuge is designed for continuous operations. This up and down motion of the live bottom pushes the chips upward through the sieve. The centrifugal force, up to 500 times the force of gravity, will dry the chips, resulting in the maximum degree of de-oiling. The remaining oil content is extremely low. The dry chips fall down over the edge of the drum into a container. The are different models and different drives available.

In addition to the construction of small, standardized devices, our focus is on the development of semi- to fully automatic cleaning lines with varying complexity. The use of ultrasound in aqueous solutions is employed in most cases, ensuring a fast, gentle, and yet efficient cleaning process. Furthermore, we design and manufacture stripping tanks and multi-stage stripping lines, enabling you to ...

... (Viton +120 °C), filtration: max. 25 μm. The Perbunan seals are resistant to common hydraulic oils and lubricants. Other seals are available. For hydraulics, an oil with 46 mm²/sec or higher is recommended. Higher viscosity is advisable. Request oil recommendations! The standard version rotates to the right.

...For the adsorption of oil mist vapors The Polycarb is a highly permeable activated carbon block, which has a sintered polyethylene filter layer made of granulate on the outside in the direction of filtration. This sintered PE layer provides stability and prevents the release of abrasion into the filtrate. ▪ Filled with a maximum amount of activated carbon ▪ Suitable for filter housings with...

... in all common sizes and materials as well as with various bag sealing types. They are particularly suitable for use in the different phases of fluid filtration. • PRE-FILTRATION OF FLUIDS WITH HIGHER LEVELS OF CONTAMINATION • FILTRATION OF (VARIOUS) FLUIDS IN BATCH OPERATION • END-FILTRATION OR VERY FINE FILTRATION OF FLUIDS WITH LOW SOLIDS LOADINGS • NEEDLE FELT FILTER BAGS • MONOFILAMENT FILTER BAGS • MULTI-LAYER FILTER BAGS / DESIGNER FILTER BAGS • ACTIVE CARBON FILTER BAGS • PLEATED FILTER BAGS • TIE STRING FILTER BAGS • OIL AND WATER ABSORBING FILTER BAGS • FILTER BAGS FROM STAINLESS WI...

... analyzed are individually determined for each fluid and its intended use. Recording all data provided by you, including order number, facility designation, inventory number, cost center, SAP number, etc. Packaging and sending the sample for analysis. Documentation of the analysis results via fax, email, or letter. Documentation as individual results Documentation as follow-up results Documentation as filtration trends Discussion of the individual analysis results and determination of any necessary actions.

... practically free of grease and salt afterwards. The advantages at a glance: - Perfect solution for organic contaminants, such as hardening oil before tempering - Suitable for use with CFC racks - Excellent cleaning for scooping parts, such as bag holes - Unlimited service life of cleaning media through filtration and distillation - High energy efficiency thanks to the latest technologies...

...The F118 is a versatile single filter made of cast iron with flange connections. Primarily, the F118 is used for the filtration of water, oil, and fuel, and is available directly from stock. Single Filter F118/F118S Nominal Size: DN25 to DN300 Operating Medium: Aqueous media, fuels, lubricants, oil, etc. Flow Rate: 2.5 m³/h to 635 m³/h Design Pressure: 6, (10), (16) bar Material: GGG-50 Coating...

...even in saturated conditions after approximately 30,000 operating hours. Filtration efficiency > 99.99% at 0.1 µm Long-term stability for up to 30,000 operating hours Residual oil content < 5 mg/m³ Complies with applicable legal environmental regulations...

...AIRCOMPRESSOR is a registered trademark of Druckluft-Service, Karl Kummerfeldt, successor Andreas Zapalla e.Kfm. Compressed Air Generation: Blowers, piston compressors, oil-injected screw compressors, oil-free screw compressors, turbo compressors, Compressed Air Treatment: Filtration, dryers, condensate...

...Intense, fruity, low-acid white wine from Piwi Cabernet blanc Description: Intense, fruity, low-acid · a new white grape variety developed from the Cabernet family. Awarded Gold at the International PIWI Wine Award 2021. Food Pairing: Oven-grilled giant prawns with olive oil, fresh parsley tafelspitz with green sauce. Smoked trout or trout meunière. Vegetable quiche. Vinification: 24 hours of maceration, gently pressed, spontaneously fermented in oak barrels, aged on the lees for 12 months, malolactic fermentation, bottled with only one filtration.

...Plate gap, wire gap, and gap pipe filters for the filtration of heavily contaminated high- and low-viscosity media, such as fuel, lubricating oil, paint, polyol, isocyanate, cooling lubricant, etc.