foot switch Germany

... strapping band is automatically threaded during roll change. Technical Data • Electrical connection: 230 V • Strap width: 12 mm • Strap thickness: 0.55 - 0.63 mm • Core diameter: 200 mm • Machine self-threads • Up to 65 strappings per minute • Automatic strap ring ejection in case of incorrect triggering • Electronic adjustment of strap tension • Strapping trigger in automatic mode via photoelectric cell • Trigger via hand switch, foot switch, or photoelectric cell • Support table with rollers • 800 mm working height • Weight: 170 kg • CE mark Weight: 170 kg...

...The OK-300 is a fully automatic strapping machine with many features to enhance productivity. It combines high reliability with low investment costs. Automatic strap threading, mechanical strap tensioning. Optional activation of the strapping via foot switch or button on the control panel. Connection voltage: 380V/50Hz/0.75kW Width: 580 mm Weight: 200 kg Height: 1,240 mm Length: 1,475 mm Frame size: 800 x 600 mm Table height: 800 mm...

...For full wrap labeling and with a foot switch to start the labeling process. Technical Specifications: • for full wrap labeling • Container diameter 15 to 200 mm • Label width up to 200 mm • Label length up to 600 mm • Roll diameter max. 260 mm • Core diameter of the label roll 76 mm • with foot switch to start the labeling process • electrical connection 230V / 50 Hz • electrical power approx...

...Large and ergonomic height adjustment range - No displacement of table-top during height adjustment - Moulded base provides generous legspace 4 different models: Height adjustment 500 to 920 mm, either by means of hydraulic foot lever or electric foot switch with safety ON/OFF switch, 650 mm or 800 mm width. Servo-assisted head section adjustment from -20° to +40°. 2-section upholstery...

...In this area, you can choose from a wide selection of various hand and foot switch designs.

...220V, working surface 660x680 mm, lifting height 300-920 mm, maximum lifting weight 60 kg, foot switch Article description/Equipment: Lifting element lifter Power connection 220V Dimensions 670x880x930mm Working surface 660x680mm Lifting height 300-920mm Maximum lifting weight 60kg Lifting speed 100mm/sec. including foot switch...

...Reduced detergent consumption through automatic filtration and recovery in a closed loop Optional rinsing of dirt using a washing brush or soaking of the items in the wash basin Automatic closing of the lid in case of fire Description Heavily soiled parts can be easily and efficiently cleaned in this device. When the pump is activated via a foot switch, the detergent is applied to the items in...

... work even under high pressure. - Robust stainless steel housing. Scope of delivery - Station with filter, regulator, manometer, water container, spray regulator. - Foot pedal with chip. - HAC handpiece with rotor. - Oil and adapter. Item No.: L-2000...

...Optional additional lift for ergonomic picking on the first level Simultaneous driving and raising of the platform as well as lowering of the platform via foot switch possible High flexibility thanks to the optionally adjustable forks Picking up to a gripping height of 2,800 mm...

...Sealer Screw Caps GES 110, semi-automatic screwing machine for screw caps Function The distances and stops are adjusted so that the container is centered under the screw head. The required torque can be set in advance. The operator starts the sealing process with a foot switch. Once the torque is reached, the screwing machine automatically shuts off. The transfer of the caps to the containers is done manually. The screw head can be supplied for different cap sizes. Equipment: Compressed air motor with adjustable torque Screw head Foot switch Work table Stops...

...The CT 260 PRO has been used worldwide for many years. The new PRO version offers even more flexible and intelligent system solutions for your user requirements. Optionally, a foot switch, a desk microphone, an external passive speaker, a cordless or wired headset and a second handset can only be connected for listening. All devices in the network can be configured via the CT 260 PRO according to individual customer requirements using API.

...A three-phase geared brake motor drives the two rollers via gears and a duplex chain, controlled by the 2-pedal foot switch for clockwise or counterclockwise operation.

... - Mechanical band tension control - Manual band feeding - Hand and foot switch Item number: SH 201 Length: 1230 mm Width: 575 mm Height: 1476 mm Weight: 190 kg Frame size: 800 x 600 mm Height of working area: 850 mm Sound emission: ≤75 dB Sealing speed: 2 s Power consumption: 230 V / 50 Hz, 600 W Band width: 9 – 12 mm, thickness 0.55 – 0.65 mm Spools: Core diameter 200 mm Throughput: 30 strapings/min Band tension: 5 – 75 daN adjustable Accessories: Hand and foot switch (included)...

... foot pedal for manual strap release • Tool-free dismantling of the table plate [TRC] • Potential-free contacts to upstream and downstream machines • Selector switch for single, double or multiple strapping • Infinitely adjustable conveyor speed from 0.1 to 1.0 m/s • Optimization of the strapping processes by machine adaptation to defined package dimensions • Electromechanically driven...

... rotated by 140°. All electronic components, as well as the switch, are housed as ballast within the thickened light tube. The power cord measures 2.5 meters. Two toggle levers on the lamp make assembly tools unnecessary. The elegant, handcrafted lamp is destined to become a classic. Material: Brass, Light source: Power LED, Energy efficiency class: F, Color rendering index: 92+, Kelvin: 3000K...

...Blast system completely made of stainless steel. Product support via a perforated intermediate floor. Part processing using a blast gun or injection gun in conjunction with a pneumatic foot switch. Abrasive material suction through a venturi tube, abrasive material discharge via a quick-release flap. Blast system available as a stand-alone or table model. Dust extraction via a site-provided industrial vacuum cleaner or through an attached extraction system. Device pre-installed and ready for electrical and pneumatic connections. Size & dimensions according to your choice.

...oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag. Material:Steel Surface:Powder coating...

... hydraulic cylinders for sheet metal punching, for our devices for busbar processing, for cable cutters and crimping tools, or for our large hydraulic punching frames AP 250 and AP 400. In combination with the optionally available hand or foot switch, you can even operate the hydraulic cylinders SKP-1 and SKP-1 mini with this high-performance pump.

... protection - Dual air filter system - Hour meter and tachometer - Safety switch for simultaneous start and stop of the engine and fuel supply with a single hand movement Includes 3-2-1 original Bomag warranty! Operating weight: 68 kg Impact force: 17 kN Foot width: 280 mm Engine: Honda GXR 120 Power: 2.3 kW Fuel: Gasoline...

...Space-saving standing folding table. Easy handling by one person. Tabletop 60 cm, foldable Table height 110 cm High-quality, robust, and easy-to-use folding mechanism Self-locking Tilt hinge in shatterproof plastic housing Space-saving stackable, 11 cm stacking offset Easy handling, only 12 kg (with tabletop type 13) Central column made of round steel tube 50/2 mm, powder-coated black, fine structure 3-foot extension round steel tube 30/2 mm, chrome-plated Universal plastic gliders...

...table control & hand switch, and cable channel Load capacity: 80 kg (100 kg with 2 lifting columns) Noise level: < 50 dB (A) Speed: 50 mm/s Lift: max. 650 mm Adjustment systems: Motorized, lift (compression spring)...

...for sample compaction with foot switch with 2.5 m connection cable galvanized version tabletop with edge angle (arranged diagonally at two corners) table size 310 x 310 mm vibrations/revolutions 3000 rpm height 170 mm weight approx. 19 kg electrical connection 230 V / 50 Hz...

...The Neleo stretch wrapping machines envelop, protect, and secure long goods such as bundles, rods, slats, and strips. Securely and quickly package with the easy-to-use Neleo, both manually and semi-automatically. • Complete with double roll holder • Adjustable rotation speed and film tension • Horizontal feed tables at the entry and exit • Vertical guide rollers for better and easier positioning of the product to be wrapped • Manual operation via safety foot switch (optional) • Automatic feeding and cutting device, controlled by pneumatics...

... conjunction with the modern control system and adjustable servo axis drive, ensures optimal cutting performance with infinitely adjustable feed rates. The three-point clamping device simultaneously clamps the workpiece and the cut-off section, thus preventing burrs and breakouts. The pneumatic clamping device is operated via a foot switch. In addition to the protective cover and the cutting disc guard...

... Semi-Automatic): * Indexed chuck every 15° * Chuck carriage adjustable in the X-axis via hand crank * Triggering of the drilling process via foot switch Fully automatic version (UniBohrFix 300 1-Axis Fully Automatic): * Indexed chuck every 15° * Chuck carriage fully automatically movable (X-axis) * 1-axis control with program memory options * Triggering of the drilling process automatically via control ...

...Column display with and without lighting. Strong presence, variable appearance. The column display is available either with or without lighting, which can be operated via a foot switch. Everything presented in it stands out and thus has the best chances of success. When strategically placed, these displays are guaranteed to catch the eye.

... Pulling force infinitely adjustable Material sealable paper and film 30, 50, 75 or 100 mm Control manual via hand or foot switch, automatic via photoelectric cell Electrical connections 230 V / 50 Hz / 0.5 kW / pneumatic 6 bar Weight 70 to 72 kg...

...Special motors in all common types of current and voltages, also with drip-proof insulation, explosion protection, as well as low voltage 42 volts and protection transformer. Portable, mobile, hanging, in a sturdy wooden housing, on a board or metal plate. With switch and cable. Ready for operation installed. It is recommended to equip with a foot remote control, allowing one-person operation...

... sliding guides guarantee flawless clamping of the edge material with minimal wear. The bending beam is also a stable steel construction. The tool mounting is integrated as standard in the bending beam. The control cabinet is located on the right side of the machine. In addition to the electronic control, it includes all necessary operating elements and the operating hour counter. The triple foot switch is part of the standard equipment. The bending angle is preset via a CNC control.

...100 - 24000VA Isolation transformer according to EN61558-2-4 Mounting on installation surface via foot angle Power specifications correspond to T40/B Protection class IP20 Optional with temperature switch available Standardly equipped with touch-proof terminals 4mm² according to BGV A3...