fluid pumps Germany

...Merecs develops custom testing systems for heat pumps, gas, fluid, and water systems. Our engineers and technicians in electronics, installation technology, and mechanics build the systems entirely in-house at our location in Steinfurt. Following this, delivery and commissioning take place both domestically and internationally. Our offerings include: - Development test benches - Lifetime test...

... method. In this process, the generated vapors are returned from the filling container to the dispensing container via the gas pendulum line. The gas line and the liquid line are additionally equipped with shut-off valves. Gas-tight pumps are used for strongly odorous substances such as ammonia. Material: PP, PE, and PVC Flow rate: up to approx. 12 l/min...

... - No seal in the liquid area - No contamination of the medium from lubricants or wear of seal materials possible - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content Flow rate::max. 60 l/min Delivery head::max. 9,5 mwc Viscosity::min. 1 mPas - max. 600 mPas Outer tube diameter::max. 41 mm Immersion length::1000, 1200 Materials outer tube::Polypropylene Media / Fluids::Alkalis Seal::sealless Container::1000 l IBC, 200 l drums...

...With the modular structure of our pump ranges, we are able to fulfill a wide range of different pumping tasks. Our pumps are two, three or five-spindle, single or double-volute, self-priming displacement pumps for the low / medium or high-pressure range. They are used to pump a wide variety of different fluids with various lubrication properties. In order to meet the high demands on wear protection, service life or flow rate, it requires a high vertical range of manufacture. We manufacture our spindles and housings (the core elements of Leistritz pumps) ourselves in Germany.

...Additionally, the high-pressure submersible pump for clear water can dry out basements and laundry rooms flooded due to heavy rains, washing machine leaks, or rising groundwater, down to the "wet level" with a residual water level of just 5 mm. Fluid: for clear water Drive: electric Priming: self-priming, submerged Technology: unspecified Application: high pressure, for suction Mobility: mobile Other features: for wells...

...▪ Hygienic design for food, cosmetic and pharmaceutical applications ▪ Easy integration into automated processes due to compact design ▪ Length and weight savings compared to existing pumps ▪ Short cycle times ▪ Non-destructive dosing of solid containing materials with diameter of up to 20 mm ▪ Volumetric dosing and filling, regardless of viscosity ▪ For low to high viscosity materials ▪...

... a wide range of applications, be it water treatment, industry, agriculture, construction or other areas. They are delivered as complete units containing all the necessary components for efficient fluid delivery. Tailor-made configurations: We offer pump units in various configurations and sizes that can be customized to meet the specific requirements of our customers. From simple pump sets to complex multiple pump systems, we offer customized solutions tailored to individual needs.

... adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌...

...Melt pump for the production of medical fluids. Pumps of this type are used, among other things, in the production of medical fluids, such as those used in respiratory masks. The melt-blown fluid can be utilized in various ways in masks or protective filters. The EXTRU series is tailored by exkat to meet the requirements of the melt-blown process and therefore operates with the highest precision. Fluid: melt, polymers, adhesive Drive: with electric motor Priming: self-priming Technology: external gear Field: industrial, for medical Other features: not specified...

...electric Priming: semi-submersible Technology: centrifugal Sector: industrial, for machine tools, for the metallurgical industry Other Features: compact, multi-stage, radial, with closed wheel, for emulsion, medium pressure, for cutting fluid...

... exactly defined pattern and that all test data is automatically recorded and stored. Applications: Quality assurance in the manufacturing of diesel injectors and high-pressure components Functional testing of valves, pumps, and injectors in the automotive industry and in fluid and medical technology.

... with an interface card for automation by an external system (PC or PLC) — A complete range of accessories for even more convenient leak detection Detected fluid: helium Technology: tracer gas Other features: with digital display...

... service life - Axial and radial load capacity of the drive shaft - Favorable power-to-weight ratio - Versatile control program - Short response times - The through drive is suitable for mounting gear and axial piston pumps of the same nominal size, i.e., 100% through drive - Available immediately Also visit our online shop: www.hydraulik-hinners.de/online-shop/ We offer a wide range of hydraulic components.

...Fluid-dependent customizable dosing pump The micro annular gear pump mzr-7243 of the modular pump series is suitable for dosing and metering in low to medium pressure and viscosity ranges. To the main assets of this series belong low pulsation, high precision low volume dosage of non-lubricating liquids, compact design with smallest dimensions and low price. These pumps are suitable for dosing...

...All information at a glance: "Cematic Blue Electric Pump (230V, approx. 35 l/min)" for AUS 32 (AdBlue®), coolant and windshield washer fluid with a flash point > 55 °C self-priming plastic diaphragm pump, 370 W, 2800 RPM Connection on both sides 1" female thread including hose connection pieces DN19 with union nut ON/OFF switch 2 m cable with Schuko plug completely installable in any position Weight in kg: 5 Further links to "Cematic Blue Electric Pump (230V, approx. 35 l/min)" Questions about the item?

...Magnetic ball bearings are increasingly important in CO2 laser systems and fluid pumps as well as applications in the optics industry. GMN has led the development and manufacture of safety bearings, so-called ‘touchdown bearings’ since the middle of the 1990s." ...

... colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up...

... in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

... short-term replacement of faulty devices. The OPTISONIC 6300 P consists of a combination of one or two clamp-on sensors and one handheld electronic signal converter. The robust clamp-on rail can be easily attached to almost any pipe up to DN1500/160". The readings of the meter are shown on the handheld LCD and are stored in the integrated memory for data logging. In addition, all readings can be transferred to a PC via the included USB stick in order to further analyse or store the data. Fluid::for liquids Technology::ultrasonic Other characteristics::portable; clamp-on...

...Submersible motor pumps are perfectly suited for pumping water in many applications. For household water supply, pressure boosting, irrigation in greenhouses and farms, as well as municipal water supply. The FLUID SOLAR pumps have been designed to operate in areas where there is no electrical connection. The set consists of the FLUID SOLAR well pump and a control unit. Scope of delivery: Pedrollo FLUID SOLAR well pump 2 m power cable Control unit, protects the pump from dry running 2 male SMK connectors 2 female SMK connectors RPS2 cable clamp...

... to each other: Thus, the K55000-5G achieves high performance without cavitation and with very low residual pulsation. It is even capable of pumping up to 640 l/min without upstream pressure. SPECIAL FEATURES Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force Gear dynamically balanced...

...MAAG flexinox™ gear pumps are corrosion-resistant pumping units. They meet the stringent quality requirements of today's chemical processing industry, and their three-part configuration facilitates maintenance and the replacement of internal components, such as gears and bearings. They can be heated either electrically or with fluid. Thanks to the extensive selection of components and materials, MAAG gear pumps can be customized, making them far superior in performance and reliability compared to standard pumps.

...They are displacement pumps for variable quantities, offering reliability and consistent performance, and can variably dose their pump chamber volume using a stepper motor. Their minimal size, lightweight design, and maintenance-free construction allow the pumps to be placed where fluid requirements dictate.

The company LEBEN was founded in 1967. In the early years, the family-owned business developed, among other things, piste vehicles for ski descents. Since 1980, only shock-absorbing elements and vibration dampers have been developed and manufactured under our trademark Compenser®. More than 50 years of successful customer relationships around the globe and the continuous development of our product...

...Our circulation pumps are designed for better circulation of the barrier fluid, resulting in higher cooling performance. Circulation Pump Attention, opens in a new window. PDF Print Email Our circulation pumps are designed for better circulation of the barrier fluid, resulting in higher cooling performance. They are suitable for water and other liquids with similar viscosity. The pumps are also suitable for use in explosive environments.

...ELRING Curil T | 60 ml Tube (75 g) High-temperature sealing compound based on synthetic resin, which creates a permanently plastic sealing film after the solvent evaporates. The ELRING CURIL T sealing compound is particularly suitable for sealing carburetors, injection pumps, cooling systems, fuel pumps, oil pumps, control housings, and flange connections. It is resistant to oils, fats, fuels...

...Self-priming centrifugal pumps draw in fluid after a single filling (self-venting). Shaft seal: Mechanical seal. Shaft: Stainless steel, suitable for water and oils.

... and grinding sludge out of the fluid area, significantly increasing the service life of the filter fleece. - Intelligent control system for pumps, efficient IE3 motors including frequency converters that can communicate with all bus systems available on the market. - All these functions are available in a filter system that can be integrated into an Industry 4.0 environment, including cooling and magnetic separator, all within just 1m² of space.

...Reversible Heat Pumps, Scroll Compressors, R410A, 7-77 kW A series of reversible heat pumps with scroll compressors, designed for fluid injection and extended operating limits. Configurations MT: reversible heat pump for medium temperatures HT: reversible heat pump for high temperatures LN: low noise unit Key Facts Extended operating limits and performance ranges Compatible with the Ecodesign Regulation Compact dimensions...

...Contec Oil Mist Separator (COMS) - Oil mist separator from contec (COMS) for lubrication oil tanks of turbines, fluid grinding systems, vacuum pumps, steel testing stands, rotary machines, turbo compressors, large compressors, crankshaft drives, and HE rounding systems. Contec oil mist separators ensure clean, oil-free exhaust air in systems with oil systems. 99.98% of all oil droplets and dirt...