curing oven Germany

...Compact temperature profiling system for shorter paint drying processes - The DATAPAQ Oven Tracker temperature profiling systems, based on the compact DATAPAQ DP5 data logger, are specifically designed for short to medium curing processes in the painting and coating industry. A comprehensive selection of high-precision, industrial-grade DATA LOGGERS, HEAT PROTECTION HOUSINGS, the Datapaq Insight...

... without the release of toxic gases (contains no isocyanate). · Resistant to mold formation · Completely removable with ABchimie SND or DNS solvents · Very good dielectric properties · Certified according to UL, IPC-CC-830, and NF EN 61086-2 The acrylic spray lacquer. The lacquer dries at room temperature in 5 to 10 minutes and fully cures after 24 hours. The curing time can be accelerated in an oven to 2 hours at 90 °C or 4 hours at 60 °C.

...Our modern, environmentally friendly, and semi-automatic powder coating system is designed for individual parts and small series. It allows for coating with custom colors and textures according to customer specifications. It consists of a washing machine for degreasing and a powder booth for applying the powder with a hand gun. For the subsequent curing process, there are 2 ovens available (Oven 1: L=3 m; W=1.2 m; H=1.7 m; Oven 2: L=4.2 m; W=1.8 m; H=2.5 m).

...2-zone infrared oven, which can be used for both reflow soldering and curing adhesives.

...Even cool calculators start to sweat – 70 - 80% of the energy consumption of a pretreatment and coating system is attributed to the various drying and curing processes. Dryers and powder curing ovens thus offer the greatest potential to keep energy demand and operating costs low with intelligent, efficient plant technology while also reducing environmental impact. Additionally, NOPPEL offers opportunities to increase energy efficiency, combined heat and power, heat recovery, and reduce operating costs through the ECO-HEAT Plus program.

...These are wet paint or electrostatic powder coating curing ovens used in automatic systems. They operate continuously. They can be configured as gas, diesel, or electric ovens. They are space-saving, mounted on a high chassis on the floor, and the floor is suitable for a variety of storage areas. The entrance and exit of the oven can be on the same side or on different sides of the oven. The...

...Dimensions: 40x28x58cm Advantages: - Fast curing time of 10-35 minutes depending on the material - Large objects up to 346 mm x 195 mm x 400 mm - Maximum throughput through flexible positioning Technical Specifications: - 76 High Power LEDs for even 360° curing - 3 specially coated glass plates with flexible positioning - Highly reflective materials in the interior - LEDs with a very long lifespan - Touch display - Safety control - Active cooling - 405 nm wavelength...

...Pallets are loaded into the oven. When each row has been filled, all the rows of pallets are lifted up by one level. When one row of pallets has reached the uppermost position of a temperature range, it is pushed into the next temperature zone and from here is lowered down in fixed time cycles and unloaded. Serpentine conveyor ovens: Pallets are loaded into the oven in fixed time cycles and pass through the individual temperature zones.

...Manual or automatic coatings of metal or plastic parts. We find the optimal solution for every application and customer requirement. Technical Data: 4 water-sprayed stainless steel booths Part dimensions max. 1900x1900x450 mm Indirectly heated gas recirculation oven Max. curing temperature 250° C Max. load per suspension 30 kg Division 250 mm Conveyor speed up to max. 3.5 m/min Multi-reverse paint dryer with indirect gas heating and recirculation filter system.

...For small parts, we have four manual powder booths and three gas-fired chamber ovens. For large parts, we use a semi-automatic conveyor system. Here, the pre-treatment, a large powder booth, and a curing oven are connected via a rail system.

... increase productivity within the coating facility. This is because the curing oven often represents a bottleneck. With lower curing temperatures, the oven throughput time can be significantly reduced when using powder coatings, thereby increasing line speed. Starting into the future with new application fields. With energy-efficient powder coatings, you can open up new products and application fields for your company. An expansion of the part spectrum is also possible through their use.

...CAF 99 AXAD CAF 99 AXAD is a fast-curing 2K silicone rubber at room temperature • Non-flowing • Acetoxy activated • Quick complete curing • Loadable up to 300°C • Color: Black CAF 99 AXAD BLACK is primarily used for sealing and bonding in the following areas: household appliances, stove bands, connection hooks for oven doors, viewing windows in oven doors, glass-ceramic cooktops. Bonding of glass...

... - Traceability via barcode scanner at the coating system - Automatic program selection via barcode - Following data collection: Coating material; Batch; Humidity & Temperature; Coating quantity; Serial number of the assembly Curing oven - Serial number of the assembly; Temperature profile of the individual drying zones; Duration of the drying process...

...During drying/cleaning, the evaporation or combustion of liquid or oily residues from the component surface or the immediate edge zone is achieved through oven heating. Depending on the type and distribution of the medium to be removed, temperatures of approximately 100 °C to 400 °C are required. The range includes the evaporation of water residues in pressure-tested cast parts to the removal of machining suspensions on the surface of finished parts. A special case is the curing of bonded components, where the adhesive material used cures at temperatures starting from approximately 80 °C.

...• Adhesive and assembly devices are used for bonding and assembling components. • The adhesive devices can also be suitable for the curing process in a tempering oven, depending on customer requirements. • The devices are also used by the customer as simple measuring fixtures for the coordinate measuring machine, depending on accuracy requirements.

...Double Screen Printing Oven in Recirculation Operation, with Swing Doors The adhesion water dryers, powder curing ovens, paint dryers, and screen printing dryers manufactured by ARTAX Lackieranlagen GmbH operate as recirculation dryers or recirculation ovens, where a specific amount of recirculated air is directly expelled outdoors. These systems can be designed as continuous ovens or chamber...

... conveyor system then transports the items through a water adhesion dryer. Subsequently, the conveyor passes through a painting booth equipped with a semi-automatic Airmix electrostatic system and a curing oven for consistent drying. Our specialization lies in processing single and two-component paints in RAL and custom colors. Through collaboration with other companies, we also offer powder coatings, as well as surface finishing through galvanizing, electropolishing, and sandblasting upon request.

...Thermally cross-linking materials can be cured using our tempering oven. Curing/Tempering Thermally cross-linking materials can be cured using our tempering oven.

... regarding the size and quantity of the parts to be coated. • The powder coating is applied according to customer specifications, e.g., partially or fully. A uniform powder layer is the result. Gloss level: You can choose from different gloss levels ranging from matte, satin, semi-gloss to glossy. Structures: Various structures, such as smooth, fine-textured, coarse-textured/hammered, etc. are possible. Facilities: 2 powder coating stations | 1 powder curing oven 6.80 x 2.40 x 2.00 m...

...This means that a powder-air mixture is transported through a hose to the gun. There are several corona needles attached, which have a direct voltage between 20 and 100 KV (adjustable). This creates the polarization of the powder. The charged powder cloud wants to discharge its charge and settles on the grounded workpiece. After coating, the parts are passed through a curing oven. Tribo-Electric...

... curing oven • Powder coating of small and large series parts up to 6.0 x 2.5 x 2.5 meters in a modern Jumbo-Coat powder coating system with a qualitatively high pretreatment: - Degreasing and phosphating of parts made from iron metals up to 6.0 x 2.5 x 2.5 meters as pretreatment for subsequent coating - Pickling of parts made from aluminum up to 6.0 x 2.5 x 2.5 meters as pretreatment for subsequent...

... environmental aspects. The components release their heat back to the adhesion water dryer after the curing process in the chamber oven," explains Mario Heinzig, Managing Director of ALPHA Oberflächentechnik GmbH. "With the new multi-metal capable coating system, we are flexible, economical, and particularly environmentally friendly," Heinzig continues. "So take advantage of our expertise as an external contract coater for the surface finish of your products!"...

...What we offer you: • Powder coating in a variety of RAL colors, textures, suitable for every application and project. In the industry, large series are also welcome. Our curing oven measures L7500 x W1000 x H2500. • Sandblasting services for stripping paint and rust from various workpieces. Each workpiece is typically chemically stripped first, then sanded or sandblasted. This is necessary to remove old paint or rust, as well as to roughen the surface of the workpiece to ensure the adhesion and durability of the powder coating. "We do not provide a warranty for galvanized and cast workpieces!"...

As an aluminum refinisher, we specialize in the surface treatment of precision components for electronics, medical technology, machinery and equipment construction, as well as exhibition and shop fitting. We are committed to ensuring short delivery times through the fastest possible service. Adherence to deadlines and quotes is a matter of course for us. Our range of services Chemical pre-treatment for corrosion protection and adhesion improvement (3-zone pre-treatment system with degreasing and zirconium nano-coating) Coating (electrostatic in a manual booth) Curing oven...

...Development, production and distribution of films for composites technology and various industrial applications, such as vacuum resin infusion, autoclave technology, and the curing of composite components in an oven. Our product portfolio includes: Vacuum Bagging Films, Release Films, Infusion Mesh, Infusion Systems, Peel Ply, Release Ply, Breather / Bleeder, Sealant Tapes, Adhesive Tapes, and many more.