aluminium outside Germany

...In the aluminium industry, the porthole extrusion process is the standard method for the production of extruded tubes and profiles. The process is limited to a number of aluminium alloys. However, most of the commercially available medium strength aluminium alloys such as EN AW-6060 or EN AW-6082 can be extruded by porthole extrusion.

...The elegant design of the aluminium tubes makes every façade an eye-catcher. Wall spacers and tensioning cord "storm" for banner mounting included. When installing the frame, 35 mm wall spacers are always considered as an addition to the frame outside format. The listed systems were compiled on the basis of static calculations.

... production process, from casting and processing the ingots via hot and cold rolling, to packaging. Gauge:0.20 – 1.5 mm Width:min. 30 mm Inside diameter:400 mm & 500 mm Outside diameter:max. 1800 mm Temper:HO (soft) Surface:cleaned/degreased Roughness:Ra < 0.8 micro Standards:DIN EN 485...

...The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled...

... devices prevent faulty operation. You can control the hoist from the control board in the car. (option: control to be changed to the outside or to the car). When the car is opened, a small ramp with lateral protection will open, too, forming a safe transition to the car together with the access enclosure. In order to put on the mast segments, the roof has to be opened. The lightweight...

...aluPLUS is a modern enclosure made from die-cast aluminium for industrial electronics and electronic applications. It is available in the usual standard industrial sizes for the attachment of terminals, PCBs or mounting plates. The areas of application are numerous. aluPLUS is suitable for attachment to the wall outside and for industrial electronics and mechanical engineering. The lid has a...

... clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare...

... Transmission Fluid (ATF) Material:Coated aluminium; Piston rod: Hard chrome plated steel; End fittings: Zinc plated steel Mounting:In any position Application field:Cylinder speed controls, Absorption control, Finishing and processing centres...

...Colorless lacquered on the outside and inside, lid with EPE insert Packing unit: 23 - 100 - 300 - 4800 - pieces Dimensions: 29.50 x Ø 57.5 mm Material: ALU Weight: 0.00876 Kg...

...potting, ... Dimensions (Table Top):269 - 423 mm x 300 - 443 mm x 176 - 290 mm (WxHxD) Vacuum Chamber material:Borosilicate glass (HP), RIE - bell aluminium, soda-lime glass Vacuum Chamber dimensions:Ø 105 mm Tiefe 200/300 mm // Ø 190 mm Tiefe 60 mm // 135x120x65 mm Vacuum Chamber volume:approx. 1 - 4 litres Vacuum Chamber closure:Lid, hinged door Gas supply:Needle valves, Mass Flow Controllers (MFCs) Generator:100 kHz / 0 - 30 W Electrodes:a pair of electrodes outside the vacuum chamber Controles:2 - Step switch Power supply:230 V / 50 - 60 Hz Vacuum pump:Capacity: approx. 3 m3/h...

... consists of a thermal bridge-free frameless construction made of ISO panels. These panels, with a wall thickness of 30 mm, are constructed as follows from the outside to the inside: - Outer wall (RAL 9006, White-aluminium) made of powder-coated steel sheet with a thickness of 0.8 mm - Polyisocyanurate (PIR) - Inner wall made of galvanized steel sheet 0.75 mm...

... to 17.71 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

...NSP, MFL, and WFL snap-in lenses. Features Tool free clraning of the reflector and lens thermally isulated knobsp sealed reflector housing reflector temperature control through integral heat sind fins tool free, lens changing thermally isulated lens rotation ring outside of the luminaire Standard (EA( reflector HPL max 750W...

...Industrial PC with Freescale MPC5200. Key functionalities Dust-tight, jet-water-tight Can be used outside Easy to use without additional peripherals Comfortable graphic display with Windows CE Without licence fees when using Linux, graphic user interface via QT/Embedded Very robust die-cast aluminium housing with a stainless steel front...

... out which of our scaffold construction experts is responsible for your region by clicking on the relevant area on the map. Of course, we are also happy to take on orders outside the Bavaria and Austria region – from Flensburg to Friedrichshafen, from the North Cape to Sicily. If you are interested in utilizing our scaffold construction expertise for your project and are not based in Bavaria or Austria, simply click on your home region, and you will find out how to get in touch with us.

... / 1.4307 / 1.4310 / 1.4401 / 1.4404 Aluminum: ENAW 1050 / 3003 / 3005 / 5005 / 5754 / 5049 / 7020 / 6082 Also gladly with tolerances outside the norm. Surfaces: bright, coated, galvanized, fire-treated, partially coated...

Founded in 1678, we have been part of the SPAETER Group since 1980. For many years, our focus has been on trading stainless steel and aluminum. We have established a good reputation in the market as a regionally oriented dealer in southeastern Germany (including Hesse, Rhineland-Palatinate, Northern Bavaria, and Thuringia). Our customers particularly appreciate our speed and reliability. And since we place great importance on maintaining this, we are also available outside of regular office hours for you. Always close to you and here for you.

Metal Service Berli GmbH, successor to Aluminium-Service GmbH, has decades of expertise in all non-ferrous metals and supplies industrial companies both within and outside of Baden-Württemberg. We are continuously expanding our product range to meet the growing market demands. Our qualified specialists are happy to advise you and assist you with problem-solving. We are here for our customers...