adhesive coating Germany

...Dymax MD® 1040M is a versatile autoclave resistant adhesive, coating and encapsulant resistant to numerous cycles of sterilization. Features: -STERRAD and autoclave resistant of 100+ cycles, including nonyellowing - Low water absorption 0.5% - UV/Broad Spectrum and LED curable at 365nm - Compliant with ISO 109935 Cytotoxicity - IBOA free (a known skin irritant) - Compliant with RoHS directives 2015/863/EU - Solvent free...

... homogeneity, adhesion, and workability are the foundation for cost-effective installation. SILCADUR products should be stored and transported frost-free (minimum +5 °C). The shelf life of unopened containers is six months unless otherwise specified. Opened containers should be checked for suitability before further processing. SILCADUR 130 Coating Ready-to-use coating for the surface treatment of fiber products, whose creamy consistency allows for application with a brush or roller. The maximum water addition is 5%.

... creates and adhesive film which has a high hot tack. Due to this it is easier to achieve great bonds and to print at higher speeds. It shows good adhesion on many materials, which makes it a great adhesive to skip cleaning the coating equipment. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional like pens. It shows good resistance against water. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

...secutex secuGrip90laminate secuGrip90 laminate is our new, selfadhesive antistick laminate that you can apply yourself. The secuGrip90 coating, which is up to 2 mm thick, features a high coefficient of friction and is extremely abrasion resistant. Application is easy The reverse side is coated with an acrylate adhesive designed to stick to a variety of smooth surfaces including Metals, glass...

...Self-adhesive standard anti-slip tape for securing paths, steps or ramps. • Self-adhesive standard anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The anti-slip coating helps to secure paths and steps • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13 • Length: 15 m Colour:yellow/black Material:pressboard, aluminium Reference:1083130...

The industrial supplier: Your expert for industrial supplies, storage needs, construction supplies, and municipal needs. Discover our high-quality products from renowned brand manufacturers such as Bemefa, bimos, COBA Europe, dancop, Ergomat, KERN & SOHN, and Kraiburg. Our range includes workplace systems, anti-vibration mats, floor markings, signs, labels, adhesive points, measuring points, tacti...

...For inline finishing in offset printing with dispersion or UV coatings Coating plates made of polyester with a polymer surface are suitable for simpler designs, such as cartons with cutouts, adhesive flaps, or other geometric shapes. The design is cut with CAD precision on a flatbed plotter. The cutting depth is precisely defined and tailored to the material. Subsequently, the uncoated areas are...

...Double-sided adhesive paper tape Adhesive: modified dispersion acrylic Thickness: 0.150 mm Adhesive strength: 28 N/25 mm Temperature range: -40° C to +140° C The environmentally friendly adhesive has very good initial and final adhesive strength and offers good aging and UV resistance. The tape is suitable for the self-adhesive equipment of paper, cardboard, films, and for coating polyester, PE, and PVC foams. It can also be used as a splicing tape for paper rolls. Rolls: 50 m and 100 m Width: 6 to 1000 mm Available as die-cut parts...

...We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE...

...An innovation for decorative applications is the stripe coating on our narrow Coil Coating line at First American. This is a complete coil coating process in which we are able to leave tightly toleranced, unpainted stripes on the carrier strip. These give the decorative effect to the finished article, while the coated areas are coated with an adhesive system (e.g. automotive trim material or...

...Secure process management through extremely anti-adhesive roller coatings MITEX High Release 45 AS can reduce your cleaning efforts and enhance your product quality. Ideal for preventing adhesion and thereby avoiding the formation of foreign bodies. - Prevents adhesive buildup and thus product contamination - Unmatched high anti-adhesiveness - 45 Shore A material hardness - Antistatic...

... products for bundling cable harnesses. They provide a simple and effective solution for organizing cables and wires neatly and securely. The tape is made from a flexible material with a special adhesive coating. Aluminum Adhesive Tapes for Heating, Air Conditioning, and Sanitary Applications Aluminum adhesive tapes are particularly resistant to cold and heat, as well as durable. These specially developed adhesive tapes are used in heating, air conditioning, and sanitary applications. They provide an effective solution for sealing, insulating, and repairing pipes.

...Small parts for installation in injection molding machines. PUR foam based on polyether. Ether foams are highly elastic, very robust, and exhibit high resistance to water and aqueous liquids. Protected against oil on the top side with a coating. Equipped with self-adhesive backing on the underside as an assembly aid. Cost-effectively cut for larger series, alternatively water jet cut for smaller series or special requirements.

...Application: Inline after curing or after surface treatment with active UV-curing, roller application, available as 1K- or 2K-system UV-curing base coat for two-layer UV-curing coatings 100% UV-curing polymer coating, high adhesive bond to the concrete surface, strong colour-intensifying effect, high alkaline and water resistance, high block resistance...

... resin: Core functional element. - Additives: Improve performance and application range. - Protective colloid: Hydrophilic coating, usually polyvinyl alcohol. - Anti-caking agent: Fine mineral filler to prevent clumping.

...rubber on glass), for water-repellent impregnation of absorbing materials or as separating film for casting resin applications Advantages and benefits Thin, tack-free separating film with very good adhesive properties on prepared surfaces Best suitability for low-friction lubrication of all kind of materials in contact Colourless and odour-free antifriction coating with non-stick properties Operating temperature:-180 °C → +150 °C/+250 °C...

... magnetic or conventional clip attachments are not suitable. T— SELF-ADHESIVE with ultra-fast response, single strand, and PTFE coating. Low thermal mass design ideal for small parts or plastics. T— HIGH TEMPERATURE EXPOSED JUNCTION with fiberglass cable intended for high-temperature coating applications (PTFE and Dacromet, for example). Attachment to the substrate by spot welding on-site, or...

...PTFE glass fabric is a composite material made from E-glass fabric with an additional PTFE (Poly-Tetra-Fluoro-Ethylene) coating and is available in various designs. Application temperature: up to 260°C Application limit temperature: approx. 300°C Coating: PTFE (Poly-Tetra-Fluoro-Ethylene) Variants: optionally also antistatic or one-sided self-adhesive Material thickness: 0.08 - 1.0 mm Standard width: 1000 mm Format: roll goods, cut pieces, stamped parts, custom configurations...

...ELKALUB FLC 4010 is used for the lubrication of chains, joints, rollers, guides, and spindles in a temperature range of -35 °C to +180 °C (up to +200 °C with continuous relubrication). Its high creep ability ensures that wear-prone internal friction surfaces are lubricated. After the solvent evaporates, a transparent, highly pressure-resistant, and adhesive film remains. In offset printing machines, ELKALUB FLC 4010 is suitable for lubricating gripper seats (especially under UV light conditions and in the coating area). ELKALUB FLC 4010 is supplied in 400 ml aerosol spray cans.

...We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are...

...Non-adhesive sealing material made from expanded graphite with a perforated 0.1 mm thick stainless steel 1.4401 insert. Free from resins, impregnations, or other organic substances, thus also free from any potential toxic residual risks. Particularly suitable for hot water and steam at high temperatures up to 450°C. With internal flanging, it is also suitable for media in the food industry. Retains its physical properties throughout the entire application range.

... the adhesive cord. To provide thermal insulation, aluminum windows are equipped with internal plastic insulating ribs - these need to be joined. This is where our adhesive cord comes into play. It is a bico-filament with a core made of polyamide 6.6 GF25% and a melt adhesive sheath. During the coating process (powder coating at temperatures between 180-230°C), the adhesive function of the adhesive cord is activated after cooling. This firmly bonds the aluminum profile and the plastic rib, filling all cavities (capillaries).

... of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black. Temperature resistance::-40 °C - +90 °C, short. (max. 2 hours.) up to +120 °C...

... offer individual solutions: » Other colours of the rubber coating » Harder rubber coating » Printed rubber coating according to your specifications » Other mounting options (such as external thread) » Higher adhesive force Article number:AS070HFC-00s-00 L mm:70 B mm:50 H mm:13 Force* N:45 Force* N ¹:14 Shear force* N:20 Weight g:125 Temperature °C:120...

... coating devices - everything will be cleaned by us for you! Detailed advice and documented cleaning of samples ensure consistent results over a long period of time. Test us - In addition to comprehensive advice, we offer you the opportunity to carry out your own cleaning trials of workpieces up to a length of 3 m and / or 4 t in weight. Cleaning trials: Every customer can convince himself of our offer by a free sample cleaning. Whether cleaning, surface treatment or decoating - with us you as a customer can see the result even before the first order!

...Cutting is the high art of precisely separating materials into exactly specified dimensions with the smallest possible tolerances and minimal waste. With our longitudinal cutting machine, we can cut roll goods into precisely wound and cut roll goods. Wrapping large rolls into smaller rolls is possible. We are happy to coat your materials with self-adhesive laminates upon request or laminate various products together with self-adhesive film. We process, among other things: - Technical fabrics with coating - Laminates - Composite films - Self-adhesive films or similar materials...

... produced with a one-sided adhesive coating. • Thermal conductivity: 1.6 W/mK • Very good thermal contact • High mechanical stability due to fiberglass reinforcement • Very high dielectric breakdown strength • Extremely aging/chemical resistant • Residue-free removal after use Show complete detailed description Show less...

...-resistant qualities with and without adhesive coating – for use in all areas where rubber is subjected to high stress and abrasion (e.g., protective pads for elevator buckets for abrasive bulk materials or sleeves in the concrete industry).

... can: Aluminium cleaner and care product, greaser and lubricant for antennae, interior room spray, adhesive lubricant, high pressure lubricant, fan belt spray, contact and electro protection agent, assembly compound, MOS-2 lubricating and dissolving spray, rust and dirt remover, acid-resistant lubricant and terminal grease, locks and cylinder locks lubricant and line grease lubricant with PTFE, silicone spray, white greases and compounds, chain spray, Bowden cable spray. Fields of application The automotive industry, construction machinery, agricultural...

... inside and allows for cable installation without removing the clamping plate. Sign attachment The signage in Unity design is done using adhesive film signs, which can be easily applied in the embossed area of the cover plate. Measuring point opening The generously sized measuring point opening, with rear and front flaps, offers ample space and impresses with the simple installation of the measuring technology.