gas cooler

...BORSIG has developed its own boiler design. This boiler design is suitable for all gasification processes. The waste heat boiler is designed as a fire-tube boiler. The hot synthesis gas enters the heating surfaces with a temperature of about 1,400 °C and is cooled down in these tubes to approximately 300 °C. The heat from the synthesis gas is used for generating saturated steam.

...VC Compact Type units are designed for heavy-duty applications in harsh environmental conditions, such as process cranes in metallurgy, oil & gas, cement, mining, and port industries. The main features and benefits of this product include: plug & play compact design, ease of maintenance, and reduced need for assembly services. Cooling, ventilation, and heating modes are available while filtering...

... between the various buckets. As an addition, we also provide our popular grabber for excavators (SH360), so you can easily... Weight: 600 Kg Engine: Briggs & Stratton, 10 HP, Gasoline, XR1450, 306cc Gas Tank Capacity: 6.5 Liters Cooling: Hydraulic Oil Cooler Electric Starter: 12 Volt Maximum Climbing Ability: 25° Maximum Speed: 1.4 km/h Ground Pressure: 0.35 kgf/cm² Track Width: 1100 mm Oil...

... tap. Hot tap. COOLING POWER (W):205 POWER CONSUMPTION (W):100 VOLTAGE 230 V 50 Hz single-phase (A) (Consult other options):0,5 COOLING CAPACITY (l/h):18 CUP FILLING TIME (seconds):4 WATER OUTPUT TEMPERATURE (ºC) (Regulated by thermostat):4-11 REFRIGERANT GAS (CFC - free):R290 MAXIMUM TEMPERATURE HOT WATER (Adjustable) (ºC):(90ºC) Weight (kg):16 DIRECT CHILL COOLING SYSTEM:YES...

... (International Maritime Organization), EPA (US Emission Protection Agency), EURO, etc. We have developed various cooler designs with regard to the different requirements of EGR Coolers at 2-stroke and 4-stroke engines. The patented design for 4-stroke engines high pressure EGR system enables cooling of exhaust gas, some of which are over 700 °C, down to 50 °C.

...Liquid coolers for low temperatures, even in outdoor environments The RW CW series process fluid coolers (water, water/antifreeze) are water-cooled and operate using eco-friendly gas compression. They allow for cooled liquid temperatures ranging from -8°C to +20°C. In the standard version, ambient temperatures of up to +40°C are permitted, but in the "RW ax/HTA" version, even higher ambient temperatures can be achieved. Standard IP54 protection rating, allowing for outdoor installation without a protective roof.

... / Dry Extractive (SEC Box or gas cooler) Sample line: Polytube unheated / heated Calibration gas connection: Yes, one sampling unit or analyzer Built-in O2 option: Yes Serial interfaces: RS232 / RS422 Communication: Ethernet...

...For many years, our workshops have been manufacturing gas coolers in the form of star tube coolers. The star tube coolers are equipped in the cooling water area either with homogeneous internal lead lining or with a corrosion-resistant internal coating. The star tubes needed for production, featuring a star-shaped internal profile, are produced at JL Goslar on the extruder press. The...

...* 4 motors, drum, airflow, mixer and cooler motors. You can roast new batch while you are cooling previous batch. * Premix burner with flame control. Our burners mix the air and gas before blowing into the burner head for efficient combustion to reduce gas consumption. And you can adjust the flame power which is very important for roasting process as you need it to control chemical reactions...

... PEELING MACHINE for bark CHIPPER MACHINE CRUSHER MILL DRYING COMPLEX, including: burner, combustion chamber, cyclone with hopper, fan, distributor, spark catcher, separator PELLET MACHINE COOLER - dust collector for pellets PACKAGING MACHINE - packages the finished pellets in 15 kg bags BUFFER CONTAINER for wet sawdust BUFFER CONTAINER for sawdust for...

...MCC-T closed circuit evaporative tower allows to keep process fluids unaltered even in large plants. Some examples of applications: oil & gas, food industries, large paper mills. Easy transport of modules over long distances with reduced costs. To keep unaltered cooling fluid's characteristics:Water, or the water with glycol mixture to be cooled, circulates in the battery. Compact design and...

...Wide capacity range gas cooler series, created for small or large transcritical CO2 systems with high pressure. This product is perfect for green and climate-friendly solutions and is suitable for commercial or industrial buildings with medium power demand. Available heat capacity is up to 1 MW upon nominal conditions (when Tin is 115°C, Tout is 33°C and Tamb is 35°C and pressure is 91,7 bar). V...

...Dry ice production capacity of up to 120 (240) kg/h at 15-20 bar liquid gas pressure and 3 mm pellets. 4 kW hydraulic unit with a maximum of 200 bar, hydraulic oil cooler with electric fan, PLC-controlled program sequence, manual operation possible. Control panel can be positioned on the right or left. Complete housing made of 1.4301 stainless steel. Includes condensate collection tray. Weight: 650 kg Country of origin: Germany Production capacity: 120 kg/h...

... of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser. Materials (Tube and frame):1.4301, 1.4404 und 1.4571...

...Mineral Oil-Water Shell and Tube Cooler...

... Semi-hermetically sealed compressors and electronic leak detection technology minimize the risk of potential gas leaks. Quiet construction for noise-sensitive environments. The LCD display provides extensive representation of operating parameters. Microprocessor control for precise and reliable operation. Can be activated for remote and GSM control. Portable, galvanized frame with 4-point...

... industrial facility or on machine tools. The following components are mounted in REOL refrigeration machines: - Air condenser made of copper tube and aluminum fins - Oil outlet pressure glycerin manometer - No oil return alarm via flow switch - Pump stop alarm - High and low gas pressure alarm - High temperature alarm - Digital thermometer/thermostat - Wired multipole electrical connector (plug + socket) - Lifting eyes - Support feet...

... liquid can be controlled with the built-in reducing valve. The scrubbing liquid temperature is maintained by a spiral cooler in the liquid circuit. Pressure:-1.0 (FV) to +0.5 bar Temperature exhaust gas:-60 °C to +200 °C Temperature scrubbing liquid:0 °C to +80 °C...

.../off switch and an electro-mechanical thermostat, which can be used only during the warm seasons. Temperature: +2°C to +8°C Capacity: 110 Liters White Model: White coated steel exterior and galvanized interior Stainless Steel Model: Stainless steel exterior and interior Gas: R-124a Power: 230V / 66 kW Dimensions: L 705 x D 540 x H 835 mm Weight: 42 Kg...

... exactly what is needed: it first passes the gas through 3 washing devices that remove most impurities, then it goes into a Peltier cooler, which removes moisture, and finally, there is a protective filter to ensure that only clean gas enters the sensors. All enclosed in a single compact and portable device, perfect for any need. APPLICATIONS: Syngas plants Ethane plants Research center Syngas system integrator...

... flow rate at atmospheric intake pressure ca. 30 m3/h, Booster-variant flow rate max. ca. 70 m3/h, OEM compact variant with integrated cooler over the electric motor and minimal pipework and instrumentation for integration into an OEM system. Version for explosion-protected plant (conforming with ATEX zone 2 externally), Very robust and long-lasting construction, Compact and foundation-free installation, Very quiet and hence suitable for installation directly at the workplace.

... welding — WIG AC pulsing (sec/special) — 2-stroke / 4-stroke operation — Adjustable upslope and downslope time — Adjustable pre-gas and post-gas flow time — Manual welding — Adjustable hot start current and hot start time — Adjustable arc force — Anti-stick function Available as DC and AC/DC variants with optional torch connection for standard start/stop torches or up/down torches. Weight (in kg): 18.8 Welding current adjustment range (WIG): 3 A - 230 A Welding current adjustment range (manual): 5 A - 180 A Dimensions (in mm): 539 x 210 x 415...

... greater moisture absorption in the room. An automatic system regularly defrosts the dehumidifier economically with hot gas, making it highly effective even at low ambient temperatures. A permanent water drainage (connection 3/4" external thread) can be connected instead of the tank.

... (RPM) 1800 Piston speed (m/s) 12.60 ESP power (kW) 1672 Regulation class (%) +/- 0.5% BMEP (bar) 17.70 Regulation type Electronic Exhaust gas temperature @ ESP 60Hz (°C) 390 Exhaust gas flow @ ESP 60Hz (L/s) 5400 Exhaust back pressure (mm H2O) 500 Consumption 110% (L/h) 391 Consumption 100% load (L/h) 348 Consumption 75% load (L/h) 265 Consumption 50% load (L/h) 188 Max fuel pump flow (L/h) 1500...

...Our vibration-resistant pipes with flared flanges direct the exhaust gas on the cold or hot side between the engine and the EGR cooler.

... hot exhaust fumes. Finned tube radiators can also be used as air heater, air cooler or condenser To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. The great increase of the thermal efficiency when applying fin tubes allows a substantial reduction in size and costs of such cooling equipment. The surface of such tubes is substantially increased and consequently less tubes are required compared with exchangers with plain tubes.

...High frequency welded fin tube extendheat transfer surface that provides maximum efficiency in theat exchange applications from exhaust hot gas to a contained liquid process. Both solid and serrated fin tube is used for Heat recovery steam generator, Petrochemical, Boiler Plants, Economnizer, Gas cooler and Heat exchangers in a wide range of applications. Solid fin tube is recommened for...

... - Cooling air fans - Fabric filter - Fixed bed reactor - Suction system Raw gas cleaning system in a crematorium The hot flue gases from the incineration furnace are cooled in a gas/liquid counterflow heat exchanger to the operating temperature of the fabric filter. By cooling the flue gases in the heat exchanger, the cooling water is heated. For recooling, it is circulated in a closed loop...

...Gas treatment plants significantly extend the lifespan of engines in combined heat and power plants by selectively removing pollutants and moisture from the process gas. Our heat exchangers are particularly designed for the treatment of biogas and sewage gas. They are used in both small plants with approximately 50 Nm³/h to large facilities with over 2000 Nm³/h gas throughput. In the gas cooler, the gas is dehumidified, and harmful substances are carried away with the resulting condensate.