non-return valve France

...Asrcar Check Valve - CHECK VALVES...

...Smooth end check valve EPDM seals Stainless Steel 316L Available sizes: from DN25 to DN104 Standard: CE 1935/2004 PMS: 10 bar Temperature: -20°C to +130°C On request: FKM seals ORDER EXAMPLE: 661411-25SG...

... not oversize a valve as it may flutter during operation. The type of outlet for the RFF valve can be: - welded, series S (ASTM standard) - welded, series M (DIN 2448) - brazed, series B - socket welded, series K - angle weld instead of a full penetration weld. The valves are delivered painted blue to indicate the non-return function. The filters have the same outer dimensions but are painted gray and have a machined groove on the upper flange. Stainless steel taps similar to steel taps except: Available from DN 10 to DN 25 Body in stainless steel X4CrNi 18-10 (1.

...TECHNICAL SPECIFICATIONS - Reference: 006993 - Vertical cylindrical tank with flat base, 3% slope. - Vertical rectangular door with external opening 410x530 with hatch and closing lip. - SIM level without return with scale on the left. - Stainless steel piston tasting tap with sleeve 15x21. - Non-removable charging column with a diameter of 53 mm. - Dial thermometer. - Total discharge diameter 83...

...Electropump brass body (stainless steel optional) Equipment pressure switch, manometer, and non-return valve Tank 2 liters Rotation speed 2800 rpm Power 0.37 Voltage 230 V single phase Current 2.5 Port 3/4" F Max. head 20 meters Specifications and advantages Compact suppression group TECHNOLOGY: Side channel ATEX: No PUMP TYPE: Bare FLOW RATE: 1.2 m3/h PORT: 3/4" F BODY: Brass MECHANISM: Brass PUMPING ASSEMBLY: Kits or transfer sets...

...Reference 8090226 Detailed Description 1" NON-RETURN VALVE FOR REGULATOR...

... concentrations. The non-return valves eliminate the risks of explosion propagation and the return of dust when the system is stopped. The valves are manufactured under quality assurance production no. INERIS 03 ATEX Q406. Assembly is done using clamps or flanges depending on the diameter. The non-return valves are suitable for the transport of explosive dusts of class St1. Operating principle: When the system is running, the speed of the air flow in the network keeps the non-return valve open. When...

...This technology is based on nearly 25 years of experience, allowing for the production of single-use chemical breathalyzers that offer: 1. Unmatched ease of use to date. 2. Remarkable compactness. 3. Guaranteed hygiene and safety with a mouthpiece and its anti-return valve. 4. Environmental protection far ahead of the competition: no non-biodegradable plastic pouch, chrome compliance...

...We manufacture non-return valves in aluminium bronze, delivered "as cast" , rough or fully machined according to international quality standards...

...WITT flame arresters for reliable protection against dangerous gas backflow and flame flashbacks according to DIN EN ISO 5175-1 standards. Each device has been 100% tested. The best flame arresters on the market Advantages A large FA stainless steel surface stops dangerous flame flashbacks. A thermal shut-off valve TV closes the flap before a flame flashback raises the temperature of the flap to a dangerous level. A spring-loaded NV non-return valve mechanism prevents slow or sudden backflow of gas that could create explosive mixtures.

...piSAVE® onoff Independent pneumatic device for compressed air savings for vacuum pumps. 2/2 NC valve controlled by a vacuum switch with adjustable vacuum level. Available with high hysteresis for object handling applications, and with low hysteresis for process applications. The Vacuum Distributor is recommended for vacuum pumps operating on sealed systems. The vacuum pump must be equipped with a non-return valve.

...Kit with 150-liter tank Pressure boosting system for domestic or small collective use Flow kW 0 to 5 0.75 to 1.10 m³/h kW • 1 three-phase 400 volts pump, cast iron or stainless steel • 1 bladder or diaphragm tank with contactor and pressure gauge • 1 non-return valve • 1 set of necessary fittings for assembly • 1 circuit breaker + 1 thermal relay mounted on a mast • 1 painted steel W frame Set...

...1 pump 400 volts three-phase, cast iron or stainless steel 1 bladder or diaphragm tank with contactor and pressure gauge 1 non-return valve 1 set of necessary fittings for assembly 1 circuit breaker + 1 thermal relay mounted on a mast 1 W-shaped steel frame Set delivered assembled and tested Pumping can be done from a well, a reservoir, or the existing network (pressurized) for supplying the habitat. The units are also suitable for irrigation, washing, or agricultural use. Model: K200V In stock: 2 Products...

... higher suction capacity (up to 5000 m3/h) and a deeper final vacuum (down to 0.2 mbar abs). - Measurement and safety instrumentation - Non-return valve without pressure loss on the suction - Hydraulic guard device on the overflow - Bypass valve for the air ejector - Condenser and/or charcoal filter on the vent...

...The ABC powder extinguisher is a permanently pressurized device. Available in 6KG and 9KG. It is equipped with a pressure gauge featuring a non-return valve and a testing system that allows for easy and quick pressure checks. (Green = pressure OK and red = low pressure). A sealed pin ensures safety against accidental handling. Brand: Mobiak Reference: EPP_KG Pressure: Permanent...

...Kit Contents High-quality parts and products. This kit includes: - Oil filter element - Air filter - Separator element ES11-15 - Vent thermostat kit 71°C KA2-7PLUS - Non-return valve kit - Washer 18D - Spare parts kit - Minimum pressure valve kit Don't forget the oil! At every maintenance With each use of a CompAir maintenance kit, the use of screw compressor oil is necessary. Oil: SCWOBG2-5 This level 3 maintenance kit is designed for CompAir screw compressors and ensures the longevity of your investment.

...Full panoramic rubber mask with an extra-large field of vision. Full panoramic rubber mask with an extra-large field of vision. Inner half-mask to reduce blind spots with 2 air circulation valves to prevent fogging, non-return valve. Harness with 5 adjustment straps featuring a quick-release fastening system. Shoulder strap for resting the mask. Applications for Soil: Repair & mortar...