manual valves France

...Manual flap with a seal that allows for the manual opening and closing of a suction network while ensuring perfect sealing. This optimizes the airflow of your system and thus its energy consumption. This type of flap is ideal for sweeping nozzles or traditional woodworking machines. Assembly is done using a clamping collar, just like a standard pipe. For these reasons, manual flaps with seals are...

...Description Construction Materials • Body, flange, screw, and shaft: stainless steel • Joints: stainless steel (optional nylon with code -A) • Membrane and valves: elastomer resistant to hydrocarbons (optional neoprene with code -A) • Lever: galvanized steel with a 1-meter long rubber handle Features and Specifications • Manual membrane pump Fluid: Water, Seawater, Fluid with particles, Diesel...

...Manual diaphragm valve KDVM100, welding ends EPDM diaphragm Stainless steel 316L ORDER EXAMPLE: 662365-15 Available sizes: from DN15 to DN80 mm Standards: CE 1935/2004 Maximum allowable pressure: 10 bar from DN25 to DN50, 8 bar for DN65 and DN80 Temperature (EPDM): -10°C to +100°C Standard: stainless steel 316L molded body - Ra = 0.8 µm...

...Welded steel construction in carbon steel or stainless steel Continuous use from +200°C to +600°C. Upstream/downstream sealing by metal/metal stop and blowing hot air between the two butterfly valves. Diameter DN 400 to DN 4000 or section 200 x 200 to 3000 x 3000. Electric, pneumatic motorization, manual reducer.

...Very wide range of manual control distributors: 90° lever, push-pull, button, panel-mounted. Available in sizes 1/8 and 1/4, functions 3/2, 5/2, and 5/3. Its aluminum construction ensures great robustness and very high reliability.

...Selection valves are compact, motorized standalone modules that serve as a ready-to-use alternative to manual selection valves. Each module features a unique circuit for directing the flow, designed to perform a specific set of laboratory tasks. You have a wide range of products available to best meet your analytical needs.

...Spring-loaded and direct passage valves to relieve overpressure from buffer tanks, pipelines, and other equipment. Advantages - Compliance with DESP 2014/68/EU standards, category IV, Modules B and D - Customizable opening pressure - TÜV certificate for pressure adjustment - Available in brass or stainless steel (ES) - Seal suitable for gas or as per customer request - Compact dimensions for easy installation - Wide selection of inlet connections - With or without condensation outlet - Dust cap - SV805A (manual purge), to check proper functioning...

... the device: SNOOPER mini > with a flexible gooseneck (length 22 cm) and SNOOPER mini H > with a manual sensor (spiral cable, handle, flexible gooseneck). Device available for methane, propane, and hydrogen. Replaceable sensor filter. Very short warm-up time, quickly operational. Audible signal: depending on concentration and can be disabled. The LCD display lights up during use. Excellent value for money. Available gases: CH4/H2/C3H8...

...2/2 Solenoid Valves for Compressed Air On/Off Valve NPSF 1/8" Connections Coil 0.6 W Electrical Connections: DIN (c) For Piab vacuum pumps up to Classic size. Priority manual control...

...Marketed for over 10 years with more than 1,200 units sold, this tracked vehicle has been improved twice: in 2018 with a wider support bar and in 2020 with the replacement of the track tension springs with a manual tensioning system, allowing track installation and removal interventions to be reduced to just a few minutes (note: some photos on our site correspond to the old version with tension springs). Load: 700 kg Max slope: 45°...

... appropriately sized tanks, capable of providing a sufficient discharge flow to verify the correct lift of the seat and the strength of the valve components during testing. Complete protection around the bench ensures the safety of operators. PC PROGETTI test benches are available for both water and gas testing, in different types of claw clamping: manual locking, manual self-centering, hydraulic self-centering.

...Download the manual Highly reliable safety device. No maintenance required. Applications: domestic gas boilers, water presence detection, etc. ... OPTIONAL: Adjustable valves Custom connections Plastic body (material study and mold).

...Wall-mounted microprocessor dosing pump for proportional dosing via an external dry contact (water meter, regulator...) Operating modes: - Manual - Pulse multiplier - Pulse multiplier with memory - Pulse divider Complete installation kit included (standard injection valve, strainer, 2m of PVC suction tube, and 2m of PE discharge tube) Hydraulic configuration: - Pump body: PVDF - Diaphragm: PTFE - Valves: FPM / Viton®...

... (among 5 Languages). IP65 Protection. Power Supply 100 to 240 Vac. Consumption: 12 W. PVC Head, PTFE Membrane, Ceramic Ball Valves, FPM Seals resistant to Chlorine and Acid. Model: HYDRA .PH5 or RX5 Regul Prop. pH or Rx Flow Rate: 8 l/h Pressure: 2 bar Connections: 4/6 mm Frequency: 160 Power Supply: 100 to 240Vac 50/60 Hz...

... solutions combine performance and flexibility while providing you with high profitability. Our machines are designed to operate in cleanrooms (class 10,000 / ISO 7), but we can also offer models that meet even stricter air cleanliness requirements. Products to be assembled include aerosol valves, sprayers, injector pens, syringes, needles, catheters, ...

...– Asymmetric type bending machine with 3 smooth driving rollers for bending tubes, flat bars, and profiles – Standardized electro-welded steel structure, well machined – Adjustable lateral straightening rollers in one direction – Manual movements of the straighteners – Hydraulic unit incorporated into the machine frame and protected by safety valves – Machine delivered with a set of standard...

...-seismic sleeve (Rep.8) consisting of Model: EUR5 "EDF" In stock: 4 Products Maximum service pressure (PMS): 12 bar. Test pressure (Pe): 24 bar. Flow rate at 12 bar: 180 L/min. Mixed diffuser valves HUGJET DMFB: bronze Two possible qualities: PVC (or rubber on request).

...Depression table with areas setting by manual valves and depression by turbine. Subject to the machine configuration / chosen options. Online sales on Meca-line site here...

L.LAIR, the leading French manufacturer of air jet burners, specializes in industrial gas burners, gas assemblies, gas regulation and safety, flame control, and equipment for air heating in industry. From automotive to aerospace, from food processing to waste treatment, L.LAIR meets all the needs of industrial clients using gas-powered air heating systems in France and abroad: from design to devel...

... (hybrid kit) Oil Care Function (New PAG Oil Reservoir) Vacuum Level: 0.02 mbar Compressor: 8 cc Safety Pressure Switch Dehydrator Filter Capacity (Recovered Refrigerant): 27 Kg Non-Condensable Gas Purge Valve: Manual HP and BP Valves: Automatic Recharge Hose Length: 3m HP and BP Gauges: Analog 80mm Pulse-free Eco Lock: Patented Internal + External Flushing* Super Charge Heating Band Function: Patented "Air Purge System" Function Agri and Work* Oil Clean HPV Pump Multipass Hybrid Function* N-Leak Test: Leak Tightness Test at...

... co-penetrating and counter-rotating. – A clarinet with manual stainless steel valves for steam injection at 6 points. – In the conditioner with a ramp of 4 spray nozzles, each equipped with a manual valve – PT 100 temperature probe at the product outlet. – A mild steel frame to support the entire assembly.

TUNING, a growing French company, specializes in the manufacturing of manual and motorized industrial valves, both pneumatic and electric: Manual valves, Double-acting and Single-acting valves, Pneumatic actuators, Electric valves, Electric actuators, Solenoid valves, and Contact valves. TUNING has an excellent reputation in the sectors of industry, water treatment, heating, and ventilation, both...

...For over 90 years, Guichon Valves has been fully committed to the design, manufacturing, assembly, and testing of a complete range of custom, high-performance industrial valves, both manual and motorized, used in petrochemicals, chemicals, fine chemicals, pharmaceuticals, nuclear, and naval defense, meeting high standards. Product range: DN 10 to 1200 (3/8" to 48") depending on type, PN...

... used in refrigeration systems utilizing ammonia, CFCs, HCFCs, HFCs, and other refrigerants, with an operating temperature range from -50°C to +150°C; their nominal pressure is 25 bar across the entire temperature range. (Possibility of PN 40 upon request). RFF offers its clients steel ball valves from 25 to 80 mm with lever, cap, or ISO flange for actuator, straight or angled steel valves from 10 to 350 mm, with handwheel or cap, steel counterweight purging valves of 8 and 15 mm, manual regulators from 10 to 40 mm, with handwheel or cap, as well as stainless steel check valves.

... accumulators, coolers, hydraulic filters, filter elements, spin-on filters, monoblock manual distributors, stackable distributors, piston pumps, vane pumps, gear pumps, hydraulic motors, piston motors, vane motors, gear motors, hoses, hydraulic power units, hydraulic and pneumatic components, pressure gauges and accessories... SERVICES: Manufacturing hydraulic systems (hydraulic power units...

... optimization, we support our clients in their projects with tailored solutions that meet their needs. Our main areas of activity: - Oil and Gas: instrumentation (probes, analyzers), valves (manual, pneumatic), rotating machines (motors, compressors), explosion-proof equipment, etc. - Electrical Instrumentation: transmitters, probes, electrical cables, cable trays, junction boxes, etc. - Hydraulic and...

...Deluge, water spray, vapor mitigation and sprinkler systems Hydrants, post indicator valves and fire monitors Fire pumps and fire apparatuses Fire hoses Fire trucks Fixed and portable fire extinguishers Smoke, flame and incipient fire detection Manual and remote controlled fixed monitor systems Emergency alarm and mass notification systems Combustible and toxic gas detection systems Clean agent fire...

...marking, filling, assembly, spraying, or lubrication. A range of equipment is dedicated to two-component products: static mixers, cartridges, packaging systems, and mixing valves. These devices ensure the mixing and dosing of reactive two-component (2K) products such as adhesives and sealants, including epoxies, urethanes, silicones, and acrylics.

...skimmers - Cleaning of decks and coping stones - Water analysis with treatment and adjustment of filtration times and operation of any robots - Inspection of all equipment such as filtration pump, robot, seals, valves and fittings, inspection of the electrical cabinet and circuit breakers - Complete report and recommendations - Access to hotline Installation/repair of new equipment: - Electrolyzer - Manual or electric cover/shutter - pH regulator - Lighting - Heat pump - Terrace...