ex-version

...Pre-assembled pump set for the food and pharmaceutical sectors in Ex version. The pump set is ideal for frequent medium changes and for transferring and dosing from barrels, IBCs, and other containers. Thanks to the design with a mechanical seal, the barrel pump can be easily and quickly disassembled into its two main components. This allows for good cleanability. Consisting of barrel pump FP 430...

...Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs, and tanks. * typical applications: transfer from drums and containers, transferring corrosive solutions and chemicals * integrated silencer up to model size DMP 1" * also available in the Pure version (5234-410) Features & Benefits * high hydraulic performance * maintenance-optimized design and easy installation * self-priming (even in dry conditions) * completely oil-free * blockage-free operation * pumps explosion-proof according to ATEX guidelines (Ex protection)...

...Ex-pump for application in chemical and process technology The micro annular gear pump mzr-7259X2 Ex of the hermetic inert pump series in its explosion proof version is used for highly precise, low pulsation small volume dosage even of aggressive and corrosive liquids. The compact design combined with high achievable pressures are unique features. The pumps are applied in the field of chemical...

... out without any issues. In addition to an Ex-intrinsically safe version (Zone 0), a variant with temperature signal is also available. Features: —Nominal pressures: 0 … 1 mH2O to 0 … 100 mH2O —Accuracy: 0.35 % (Opt. 0.25 %) FSO —Diameter 22 mm —HART® communication (setting of offset, span, and damping) —Separation membrane ceramic 99% Al2O3 —Good long-term stability —Especially suitable for wastewater Optional features: —Ex version Ex ia = intrinsically safe for gases and dust —Housing material titanium —Temperature sensor Pt 100 —Various elastomers...

... applications in the oil and gas industry, but increasingly in offshore wind farms, e.g. on HVDC converter platforms. Power 16 W up to 38 W Delivered output 2.696 lm – 7.474 lm Colour Temperature 5000 K (Cool White, 4000 K available as option) Temperature -40 °C / +60 °C and -25 °C / +60 °C = Emergency version Enclosure Marine grade aluminium body with polycarbonate diffuser Live Plug-and-Play-Battery-Stick Protection grade IP66 / IP67 Marking Ex e mb q IIC T4 Gb, Ex tb IIIC T95 °C Db IP6X Area classification Zone 1 and 21...

... (m3):0.24 Loading Capacity STATIC:1000 Loading Capacity DYNAMISCH (kg):500 Stacking (Static):1+1 Minimum Order Quantity (MOQ):100 Condition:new Wall thickness (mm):16 Folding window:no Mouse Tight:no Lid:included Length:800 Width:600 External height:800 Inside Height (cm):700 Weight in ex pallet:incl pallet Wall type:closed Product consists of:walls, pallet & lid UN Certified:no...

... high delivery capacity - Splash-proof design (IP55) - Usable even in very dusty environments - Fan motor located outside the main airflow - Can be connected to both intake and exhaust ducts - Stable characteristic curves and continuously high pressure - Ex-protected version Installation: floor-standing Type: Radial Function: Air circulation Additional features: Ex-protected...

As an internationally oriented family business, SIKA has stood for reliable and precise measurement, control, and calibration technology since 1901. In SIKA products, over four generations of accumulated expertise and extensive market knowledge combine with state-of-the-art technology and innovative solutions. At our headquarters in Kaufungen, in the heart of Germany, we develop and produce high-...

...) IIC T6/T5 or T4 (gas version) Protection class II 2D Ex tD (iaD) A21 IP 66 T80C (dust version) Size:DN15 - DN150 Pressure:PN 10/40 Stainless steel:1.4581 / 1.4408 Carbon steel:1.0619 Media temperature:-60 °C up to 350 °C Connection:Wafer type design Thrust:1 kN, 2,5 kN, 5 kN Voltage:24 ... 230 V AC/DC Protection class:IP 66...

...Cast stainless steel load cell for use in platform scales and for the easy weighing of small to medium containers. The load cell is available with threads and in a T-end version. Protection class IP67. Available for Ex-Zone 1, 20, 21. For economical solutions in container weighing Load cell capacity range from 91 kg to 2.268 t Error class: 0.02% Associated installation kits Type: Shear beam Construction: Beam type Use: Weighing Additional features: OIML, stainless steel, IP67...

...Ready-made, mineral-insulated heating cable with a stainless steel 1.4541 metal sheath. Highly durable heating cable for transferring large thermal outputs. Suitable for surface temperatures up to 600°C. Also available in Ex version according to ATEX guidelines (IECEx). Application examples: container heating, immersion heaters, pump and valve heating, process heating, pipe trace heating, mold and plate heating, etc. Manufacturing according to customer specifications.

... flow state is displayed on the evaluation electronics with LEDs. The devices are used wherever safe, robust, and low-maintenance monitoring of flow values is required. The measuring probes of the product series ST 400 Ex; STS; STEX have an ATEX approval and can be used in gas-ex areas depending on the version, which require equipment for EPL Ga or EPL Ga/Gb. In dust-ex areas, use is permitted up to EPL Da.

...Our newly developed filling and sealing machine LAL20 is an extremely compact filling and sealing system for packaging liquid products in glass and plastic containers. Depending on the application, it is available in explosion-proof pneumatic design, as LAL 20 Ex with up to 20 cycles/min, or as a fast version with up to 35 cycles/min in servo design. Additionally, various filling technologies...

...Tightly welded inner casing, round shape adapted to the barrel, silicone seal for minimal losses, heating jacket or bottom heater or combination with shared steam supply. Separate insulating lid, movable on swivel casters, robust industrial design, available in various standard sizes, custom dimensions upon request, control and limitation upon request, painting according to specifications, version for Ex areas upon request.

...The G100 catalytic filament sensor is an explosimeter designed for ambient explosimetry measurement or any application in explosimetry where the presence of oxygen is greater than 10%. Presented in a flameproof aluminum housing, two versions are available: - A version with a 4-20 mA 3-wire output. - A BRIDGE version with a 100 mV output. Connections are made via a screw terminal block inside the housing. Sensor certified for Zone 1: Ex d IIC T6 Gb.

... specifically provided Ex-proof power supply can be used with 2 sensing heads. Measured temperature range:-40 – 1.800°C (dependent on model) Optical resolution:Up to 100:1 Ambient temperatures:-10°C – 180°C (dependent on model) Environmental rating:IP65 Spectral response (Raytek MI3 LTS, LTH, LTF):8 to 14 μm Spectral response (Raytek MI3 G5 – glass):5 μm Spectral response (Raytek MI3 1M, 2M):1 μm, 1.6...

...Frequencies 50 or 60 Hz, Zone 1 (Gas): II 2 G Ex e IIC T4 Gb, Zone 21 (Dust): II 2 D Ex tb IIIC T90°C Db, additional version in category 3 D (Dust) and 3 G (Gas) available for short delivery.

... for direct use in Ex areas are also available with the DX99 series in a metal housing. Data radios from the DX80DR series transmit serial data, such as Modbus RTU telegrams. They form a self-organizing tree topology that can be extended with repeaters. Additionally, sensors and actuators can be directly connected to the devices, and their signals can be processed via register access.

...The transponder-coded safety switch CTP with holding force has been expanded to include a variant for use in explosive environments. In the CTP-EX version, the safety switch can be used in Zone 2 (gas environments) and Zone 22 (dust environments). To meet the high demands for use in explosive areas and to comply with the ATEX directive, various design measures have been implemented on the CTP-EX...

... equipped with electrically conductive hoses and are used in EX zones 1/21 and 2/22. Particularly in the field of pharmaceutical chemistry and the food industry, acid-resistant and high-gloss polished stainless steel extraction arms of type SMX-VA are also used for various applications. The complete frame of the extraction arm can be easily placed in the autoclave for cleaning without damaging the arm.

...Pressure: up to 1550 bar Connections: 1/4", 3/8", 9/16", 3/4", 1" Material: 1.4404 CE Ex II 2G/2D IIC Temperature: -20°C to +60°C ambient, -50°C to +230°C medium...

...Within the KE-EX 68xx luminaire series, you will find robust, explosion-protected lights available in various lengths and power ratings. The model KE-EX 6855 is equipped with a 55-watt compact fluorescent lamp. Additionally, lights from this series are optionally available as a wide-beam version (360° illumination) and as a through-wired lighting solution (upon request). A wide range of...

...Combat Deck Miraidon/Victini EX French Version...

... stainless steel Accuracy class according to EN 837-1: - for NG 100/160 accuracy class 0.6 - for NG 160 accuracy class 0.25 and 0.6 Options: Ex protection (ATEX) for mechanical devices Calibration certificate according to EN 10204 Material certificate according to EN 10204 Housing filling Mounting: Front edge for panel mounting, rear edge for wall mounting EAC...

... manner across the globe. Features: Continuous Duty Suitable To Operate In High Temperature zone (near Boiler). Ex D Version Available Valves Are Provided With Manual Override For Latch. Most Valves can Be Latched Manually by Turning Knob Anticlockwise AndDetachedly Turning Knob Clockwise. In Normal Condition Manual Override Knob Has Tobe Maintained In Horizontal Position Wide Range Of 2, 3, 5 Port Direct/ Pilot Operatedvalves Can Be Supplied Two Wire Latch Coil Can Also Be Supplied (Requirereversal Of Power Supply For Changing Valve position)...

...-cast housing with protection class IP67 • Product-contacting parts made of stainless steel, suitable for food use • Approvals for use in explosive environments (dust) • RoHS compliant Approvals: ATEX, IEC-Ex, FM/CSA, TR-CU, CCC-Ex, KCs Process temperature range: -40ºC to +150ºC Pressure range: -1bar to +16bar Sensitivity: from 30g/l - adjustable in 2 levels...

...The HI-EX® hydrodynamic plain bearing has good wear resistance under mixed lubrication conditions (thin lubricant film). Standard HI-EX® bearings are supplied with a grooved antifriction surface to ensure optimal grease reserve and distribution, but a version with a smooth antifriction surface is also available for hydrodynamic applications. Compliant with European directives EVL, RoHS, and...

...The Ex stainless steel flange ProtEx is a high-quality stainless steel flange housing for aggressive environments. The standard version has 1 flange opening, optionally expandable up to 4.

... height: 1500 mm. Max lifting height: 1430 mm. Lifting height per pedal action: 24 mm. Suitable for: Steel drums of 60 to 200 l and plastic drums of 60 to 220 l. Validation / certificate description 1 and validation / certificate 2: Declaration of conformity 2006/42 and Declaration of conformity 2014/34. ATEX protection class: Ex II 2G Ex h IIB T4 Gb. Weight: 188.

...Differential pressure measurement ranges from -1 to +30 bar [-14.5 to 435 psi] up to 0 to 40 bar [0 to 580 psi] High operating pressure (static pressure) and high overload safety, optionally 40 bar [580 psi], 100 bar [1,450 psi], 250 bar [3,625 psi], 400 bar [5,800 psi], and 650 bar [9,425 psi] Transmission fluid in the measuring chamber dampens the display at high pressure change rates Type 73x.14: CrNi steel version Type 76x.14: Version with special materials...