degreasing solvent

...Cortec VPCI® 414 is a biodegradable water-based degreaser that also removes temporary coatings such as Cosmoline™, Cortec VPCI 368, VPCI 388, VPCI 389, as well as silicone-free waxes from metal and painted surfaces. Details - Robust temporary coating remover - Effective as a light degreaser - Effective as a light oil solvent - Non-flammable - Can be used effectively at room temperature. This...

...) It is insoluble in water and used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, lacquers, varnishes, and asphalt products Uses: Degreasing and lubricating, Solvent and paint thinner,Portable stoves Industries: Household chemicals,Painting materials,Hydrocarbon solvents,Dry cleaning Properties: Initial boiling point (IBP) 145–174°C Final boiling point (IBP+21)°C Average relative molecular mass 150 Relative density 0.780 @15°C Flash point 31–54°C Solubility in water (w) < 0.1% CAS Number 64741-92-0 EC Number 232-489-3 UN no. 1268...

...Aqueous BANTLEON Cleaning Products: AVILUB METACLEAN • Specifically designed for degreasing metals • Suitable for immersion and spraying methods • Low foam production at various application temperatures • Rapid separation of oils, fats, and dirt • Long bath life due to quick separation • Cleaner available with corrosion protection additives upon request Solvent-based BANTLEON Cleaning Products...

... preparation should also be determined (degreasing or shot peening). Conveniently absorbent surfaces may be dealt with directly after a proper cleaning. For tiled surfaces and for pre-existing coverings in resin, a degreasing or shot peening treatment is required until complete opacification and complete elimination of dust. Mix components A and B each in their own container before mixing. Do not...

... silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system Density: (20 °C):0.75 g/ml Viscosity (40 °C):< 76 mm²/s...

...ELCOCLEAN has a strong solvent power on mineral, vegetable, and animal fats. It can be used on all metals, including titanium. It does not contain chlorinated hydrocarbons, benzene, or PAHs. It is a blend of optimized solvents designed to achieve significant degreasing power combined with a high evaporation rate. It quickly removes all mineral or vegetable fats, oils, all temporary corrosion...

... have existed up to now only as an idea of the customer can be specially developed by the knowledge and innovative strengths of Wachsfabrik Segeberg GmbH. Basic cleaning agents: Flexible surfactants Basic cleaning agents are based on surfactants, which are either water- or solvent-based, depending on the desired application. These industrial care products have a degreasing and dewaxing effect. Floor oils: Impregnation of industrial floors Special floor oils are used to make industrial floors less sensitive to dust and dirt and to impregnate them.

...Degreasing solvent to be used for cleaning the nail before applying UV permanent nail polish, semi-permanent, or UV gel. Reference: ITS2/CLEANER...

...Type 132 is a solvent-based, highly effective degreasing and cleaning concentrate. It has been developed for precision components such as computers, cameras, circuit boards, and similar items. The electrical contact cleaner evaporates completely, leaving no residues.

...This sounds paradoxical, but it is true. In our degreasing systems, the perchloroethylene is in a closed loop with computer monitoring. The grease is separated. This results in minimal issues for air, water, and sewage treatment plants. We process sensitive parts, bulk materials, and various materials.

...This degreasing hand soap is a smaller format of the soap from the "Power Gel" range specifically designed for painters. Indeed, it is tailored for painters and other sectors that use paint or varnish on a daily basis, but this format is more suitable for individuals. The solvent microbeads contained in this soap effectively remove dried paint stains from hands due to their abrasive action. To...

...Lubriclean EP is a 'green' solvent derived from plant chemistry. Lubriclean EP is certified chlorine-free, aromatic-free, and VOC-free (volatile organic compounds). After application on surfaces to be cleaned, LUBRICLEAN EP evaporates slowly at room temperature and leaves a fine oily film with extreme pressure properties. The film can be easily emulsified with water if complete degreasing is...

...For the degreasing of your parts, we use a closed vapor degreasing system, utilizing perchloroethylene as a solvent, in which metal and plastic parts can be degreased. The parts to be degreased, which are mostly bulk materials, are transferred into metal baskets and then loaded into the degreasing system using a crane. After the degreasing process, the parts come out of the system completely residue-free and can be processed immediately. Our degreasing system has a usable volume of more than 500 liters and a maximum load weight of 200 kg per batch.

...Derived from modified fatty alcohols • After washing the wool, a FINE, CLEAN, AND WHITE WOOL is obtained. • SUITABLE FOR REHUMIDIFICATION AND DEGREASING OF VEGETABLE-TANNED ARTICLES, without darkening the vegetable color after treatment. • It transports and dissolves dirt with great ease, performing a quick and thorough cleaning. • Reduces the possibility of wool felting. • The additional application of DESLON NAT aids in the deliming and enhances the degreasing process.

...NOVADUR® Smoke Resin Remover Low Foam. Solvent-free intensive cleaner with deep action, cleaning and degreasing. The low foam smoke resin remover eliminates the most stubborn dirt.

...For precision component critical cleaning and drying applications including validated processes. Future proofed design with a 5-year manufacturer’s warranty. - Designed to use all types of non-flammable degreasing solvents including HFE, Novec, nPB. - All machines manufactured in the UK. - All stainless-steel construction – traceability certification available. - Specialised fabrication...

... oils and oily stains from the working surface and clothes when working with oils; Removing resin stains off the wooden surface; Degreasing various surfaces before painting; Cleaning painting tools for natural oils and waxes application; Dilution of bitumen and silicone rubber mastics; Removal of oil, bitumen and wax smudges; Removal of organic stains off floor coatings (wooden parquet...

...Hot solvent vapour is applied to the surfaces of the parts where it condensates, forming a solvent film in which dirt is dissolved. As the solvent condensate runs down along the parts, it takes with it the dirt particles (dust, chips, etc.), leaving behind clean surfaces. This physical cleaning effect results in thoroughly cleaned surfaces.

... Anti - corrosive - due to the ultra thin protecting film available as 500 ml Aerosol container 5 l Can Chain and Cable Grease Bright 250 Fully Synthetic Adherent Lubricant Characteristics Excellent wear protection Perfect adhesiveness Chemically stable Penetrates and lubricates No sealing up Water resistant Long term protection against corrosion available as: 500 ml Aerosol container 5 l Can 20 l Cam High Speed Degreaser 310 Residue-Free Evaporating Solvent Cleaner Characteristics For toughest oil and grease contamination Cleans and degreases reliably Fast and residue-free...

...Tensorgrip C101 Tensorgrip C101 Citrus Cleaner is a biodegradable citrus solvent cleaner. It is used for degreasing and removing adhesive residues. Note: Not suitable for preparing adhesive surfaces or for painting! It can be used on most surfaces and substrates. Usable for painted surfaces, glass, porcelain, concrete, and is compatible with vinyl and many plastics. Excellent for cleaning spray adhesive guns and nozzles. (Formerly ACR EAN: 4260534181293 ml: 500...

... applications. Of course, we also manufacture according to customer specifications. Quick and easy degreasing or cleaning of components based on water or solvent. Brush washing table DG8 This parts washing table made of stainless steel is designed for cleaning with microorganisms or water-soluble cleaners. Cleaning with the brush washing table is carried out at a temperature of up to 40°C. The water supply is controlled by a foot pump.

... silicone-metal connections, we can draw on a vast wealth of experience. Depending on the definition or the specific application purpose of the customer, we orient ourselves to the coating process. The different initial states of the coating materials (liquid/solvent/solid) determine which method is used. We apply the materials to the components through dipping, brushing, rolling, spraying, thermal spraying, and phosphating.

... tanks. - Integrated bath maintenance through 2-stage distillation with automatic waste oil discharge. - Depending on the equipment, suitable for intermediate cleaning or high-quality cleaning at the end of the process chain. Cleaning with solvents under full vacuum: The ideal solution for parts that are heavily contaminated with oil or grease, such as turned, stamped, or formed components. The MULTICLEAN series for solvent cleaning under full vacuum includes three different models – tailored to the needs of various application cases.

...All stainless steel with a cover to close after use. Heats water up to 45°C for better degreasing. Drain for saturated product. *ADVANTAGES Completely rustproof. Ideal solution for heavily soiled parts, without the drawbacks of solvent baths. Cover to protect the tank from dust. *2 models Large with built-in blower for large volume parts and quick drying. Medium for low...

...Charge weight: 36 kg Solvent volume: 40 liters Solvent: Perchloroethylene Achievable surface tension: 72 mN/m Average batch time: 5 minutes 3-layer fully automatic or manual...

...Cleaning of small parts including rust protection We take care of cleaning and degreasing your workpieces on our modern washing systems. Our processes deliver the best results in comparably short cycle times. At the same time, our systems ensure that solvent and energy consumption is minimized – this is beneficial for the environment and health. Drying is carried out using a hot air drying...

...The Loctite® 7063 Quick Cleaner is designed for cleaning and degreasing surfaces prior to bonding. The product is solvent-based, CFC-free, universally applicable, and leaves no residues. Loctite® 7063 is ideal for preparing the surfaces to be bonded. It removes most fats, oils, lubricants, metal shavings, and fine particles. Furthermore, the Loctite® Quick Cleaner can also be used during maintenance work to clean and degrease machine parts. Size: 400 ml...

...Distillation units enable the recovery of solvents and their reusability. The solvents are used for cleaning and degreasing in various fields. By utilizing this simple distillation principle, the separation of resins, pigments, paints, oils, etc., occurs in the contaminated solvent. The distillation residues can be easily removed once the distillation is complete, as the residues settle at the bottom of the boiler (film bag). The purified and thus clean solvent is collected in containers for reuse.

...White Spirit is a petroleum distillate used as a paint thinner and mild solvent. In industry, mineral spirits are used for cleaning and degreasing machine tools and parts, and in conjunction with cutting oil as a thread cutting and reaming lubricant.

... be used on surfaces that may come into contact with food only after rinsing with potable water. Its effectiveness comes from its composition: a blend of natural degreasing enzymes, pine resin solvent actives, and lactic acid that disinfects naturally.