custom tanks

...Typically large-scale (10m3-5000m3), stainless steel vessel production for the food, chemical or pharmaceutical industries based on specific requirements. We do not manufacture to stock, here is no finished product available for immediate order, but we design and manufacture exclusively according to the customer's requirements. In the workshop we only work with stainless steel, carbon steel tanks are only built on site. volume in cubic metres:10m3 - 5000m3 material:stainless steel target market:Europe...

...Pedro Ferreira offers his expertise in distillation for the customized creation of spirits and liquors for third-party clients. Pedro is the ideal partner for the production of certified quality products with a winning character. We also provide customized distillates in 1000lt tanks.

... fasteners. The tanks are made of corrugated galvanized steel, with a Z-600 type coating. Diameters range from 3.82m to 35.91m, and the joints are sealed with sealant resistant to extreme temperatures. We offer options with pre-coated green steel on the exterior, ideal for protected areas. We also provide lids, PVC bottoms, and access ladders. Our tanks comply with environmental regulations and offer additional protection against corrosion. Furthermore, it is possible to add an access ladder with protective rings according to safety standards. Contact us for custom measurements.

...LIPP welded tanks are erected using the LIPP Welding Technology, a unique method of construction enabled by a custom automated rig designed and manufactured by LIPP. This procedure can claim a number of advantages over other traditional welding methods. Firstly, the unique steel profile increases stability and so reduces material costs at the same time. Secondly, the automated endless tape...

...For over 50 years, we have been supplying containers, tanks, and equipment across all sectors of the chemical, cosmetic, food, beverage, and pharmaceutical industries. This experience, along with our ability to produce custom solutions of any kind, makes us specialists in the field of container, tank, and equipment construction. Our manufacturing process is characterized by advanced technology...

...Since 2020, Stella has been offering the services of a molecular distillation industrial unit fully dedicated to external clients. With its 4 tanks of 15m3 each, this unit provides extensive capacity for the large volumes of our industrial partners. Molecular distillation is a green technology that does not use solvents or chemical products in the processing and purification of oils, waxes, and fats in general. Food tanks: 2x13 tons Non-food tanks: 2x13 tons Annual capacity: 750 tons...

...Standard or custom dished ends: We offer standard dished ends ranging from thimble size up to 4 meters in diameter for GRC, MRC, or PRC models, and up to 5 meters in diameter for elliptical or double-walled models. • GRC dished ends (compliant with standard NF E 81-102) commonly used in the industrial boiler sector. • PRC dished ends (compliant with standard NF E 81-101) primarily used in the...

...These tanks were designed in consultation with the customer. They are equipped with ATEX agitators. The tanks can operate under -0.5 bar vacuum and up to 0.5 bar overpressure. In our custom construction department, these tanks were built for a customer from the medical sector.

... according to ADR/RID. Depending on the radiation intensity, we manufacture our tanks with double walls or with a lead-sandwich coating. At our production site, we also produce all standard containers, from small containers with a capacity of 450 liters to 20'-ISO containers. Our customers rely on the consistently high quality of our noble, shielding, and high-security tanks, as well as on our flexibility and professionalism in realizing individual requests.

...Optima Tanks unique solutions for unique clients. Optima develops and produces custom made tanks with aluminum, steel, and stainless still for heavy load trucks, military vehicles, and municipal equipment...

...Wide range of containment trays, including for industry, power suppliers, and fire departments, custom manufacturing also available.

... options, with a stirring mechanism, or custom sizes/shapes – with a Moeschle tank, not only wine and beer are safely stored. - Wine storage tanks in rectangular and cylindrical shapes - Fermentation tanks in rectangular and cylindrical shapes with cooling-heating systems - Must tanks - Red wine must fermentation tanks - Insulated tanks with cooling-heating systems - Pressure tanks - On-site installations - Walkway systems...

... promotes oil return to the compressor. In the first installation step, it is recommended to fill the liquid storage tank with sufficient oil. For information on special internal designs, different equipment configurations, or uniquely designed products, please refer to the "Custom Solutions" section or contact us.

...) Choosing a storage container suited to your needs Multi-level Storage Multi-level storage is especially suitable for organizing tools and materials. Equipped with several shelves or storage racks, you can leave a small aisle for passage. Storage for drums, tanks, and pallets For bulky materials, a container can be adapted to accommodate drums, tanks, or pallets.

... Discharges the volume of clean water without disturbing the sludge blanket or floatable materials on the surface. Ideal for the SBR Process, Sludge Settling Tanks, Sludge Thickeners plus the general decanting process. Comprises of a Stainless-Steel float Circular Type – 10 to 150 m3/h Capacity Rectangular Type – 150 to 3,000 m3/h Capacity Custom manufactured AISI 304/316 or special...

... filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution...

...Options include custom-sized conveyors, traction motors, fixed or rotating accumulation tables, centering devices, and thermal transfer or ink-jet printing systems. The self-adhesive stations are driven by stepper motors for precise application. It incorporates an electronic card for the labeling start signal and precise electronic adjustment of the label positions. Production ranges from 2,000 to 12,000 units per hour.

...The KASAG sterile containers, mixing tanks are used for preparing and mixing of products in the food industry. The container is equipped with a mixing device and jacket for heating and cooling. The entire system is built on a frame with a control unit and weighing cells.

... well as in container systems. The installation area must be level and load-bearing. Additionally, it must be designed as a containment basin. If there is no containment area available on-site, a containment basin must be used. The cubic design of the TTE-XL ensures optimal space utilization. Custom dimensions in length, width, and height can be easily realized. The only limitation is transportability.

...% / 0.1%) FSO — Diameter 35 mm — Cable and probe part separable — Good long-term stability — High accuracy Optional features: — Ex version Ex ia = intrinsically safe for gas and dust — SIL 2 (Functional Safety) — Custom designs — Mounting accessories such as mounting fittings and tension clamps made of stainless steel — Various cable materials — Various sealing materials...

...EEx’e‘ certified immersion heater EEx e T1 – T6 ATEX The “FHK-Exe” type electric immersion heaters are EExe certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The range of immersion heaters type FHK-Exe offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists...

...Errecinque designs and manufactures thermoplastic pipes for a wide range of cooling/heating/air conditioning circuits in electric-powered vehicles. Connection pipes are produced for battery circuits, electric motors, inverters, converters, water pumps, heat exchangers, expansion tanks, radiators, intercoolers, etc. The pipes can have standard or specific interfaces depending on the type of connection present in the various components. Custom layouts are also created for every customer need, with no limitations on shape and length.

...Manual ultrasonic tanks using BRIO technology, providing ultrasonic cleaning that is three times more efficient for all sectors. Manual control with an analog panel and digital temperature control. Standard design with a wide range of capacities and custom designs to meet the needs of all sectors. PRO series functions are optionally available. External dimensions of the machine: 3,650 x 2,400 x...

...Features: - Pumping capacities from 20 to 5000 l/min - Use of wear-resistant pumps and materials - Complete stainless steel versions of return pump stations available - Available designs: round tanks with pointed bottoms, rectangular tanks, rectangular tanks with mechanical scrapers, custom special return pump stations - Return pump stations available entirely in stainless steel! The return pump stations can be customized according to your preferences!

... as covers for chemical, degreasing, coating, or paint tanks, e.g., for containing hazardous vapors. The main advantages: - Heavy, solid construction - Custom dimensions - Solid, continuous stainless steel surface - Resistant to hot chips, cooling, and grinding fluids - Individual segments can be replaced - Rolling mechanism available with or without housing Versions: - Width and length as desired.

... storage are used, for example, in breweries, technical universities, research institutes, or in specific recycling processes. Custom shapes and sizes for all installation areas: To optimize the cost-effective use of existing production spaces, the balloons can be adapted to the spatial conditions. Standard shapes such as cylinders with hemispherical ends, rectangular prisms, spheres, or pillows are available in various sizes ranging from 0.5 m³ to 7500 m³. Custom shapes can also be manufactured according to customer specifications. All gas bubbles have the advantage,...

... overload-resistant ceramic membrane for a long service life. The flush-mounted membrane allows for easy and safe on-site cleaning. The level probe is supplied with pre-configured measuring ranges from 100 mbar / 1.5 psi to 10 bar / 150 psi. Custom measuring ranges are available upon request. The corrosion-resistant TPE cable is approved for use in drinking water applications. The OPTIBAR LC 1010...

...Containers, silos, and tanks made of fiberglass reinforced plastic (FRP) in various standard dimensions and designs with a volume of up to 200 m³, as well as custom specifications. We offer a wide range of containers, silos, and tanks made of fiberglass reinforced plastic (FRP) in various standard dimensions and designs with a volume from 1 to 200 m³, as well as containers according to customer...

... bridge the resulting height difference, we offer custom-made stairs that can be easily installed. All units are mobile and can be delivered precisely to any location – upon request throughout Germany. Length: 6058 mm (20ft) / 2991 mm (10ft) Width: 2438 mm Height: 696 mm Weight: 1,200 kg (20ft) / 885 kg (10ft)...