copper tape

...Ready-made and flexible PTFE-insulated heating tape with nickel-plated copper outer braid as a protective conductor, suitable for surface temperatures up to 260°C. Features: • splash-proof • very cost-effective heating tape • highly flexible • outer protective conductor braid Application examples: This PTFE-insulated heating tape is particularly suitable for use in pump and valve heating, heating for laboratory setups, as well as for maintaining the temperature of oils, fats, waxes, chemicals, etc. Manufacturing upon customer request.

...36 micron high-strength, solderable copper foil, coated with a high-quality conductive acrylic adhesive system and protected by a silicone-coated paper liner. Designed for electrostatic and EMI/RFI shielding, cable wrapping, flexible circuit boards, coils, and transformers. Product features and applications: Good formability, heat/cold resistance UV and aging resistant Excellent solderability Electro/electronics industry Automotive and aerospace industry...

...Copper coils, copper strips, copper precision strips, copper slit strips Alloy E-Cu (Cu-ETP/CW004A) / OF-Cu (CW008A) / CuAg0.1 (CW019A) / SE-Cu, Cu-PHC (CW020A) / Cu-HCP (CW021A) / SF-Cu / Cu-DHP (CW024A) / CuFe2P (CW107C) Dimensions Thickness: 0.10 – 5.50 mm Width: 5 – 1600 mm RID: 150 / 300 / 400 / 508 / 610 mm RAD: max. 1650 mm Surfaces Mill finish / electroplated or fire refined (full surface or selective, nickel-plated, tin-plated, etc.)...

...In the field of building waterproofing, the dome has long been known as ribbed tape. This is used to line expansion joints in bridge construction, primarily utilizing a corrosion-resistant stainless steel foil. The classic copper ribbed tape has been employed in flat roofing as well as in tunnel construction to protect the affected concrete surfaces from root growth. Here too, the surface...

...Enamelled copper wire...

...The adhesive tapes can be used on the following materials: felt, non-woven fabric, paper, foam, film, metal (including stainless steel, aluminum, copper), glass, wood, particle board, plastics (including PC, PA, ABS, PS, PVC, PP, PE, Styrofoam), stone, ceramics, and powder-coated materials. The temperature resistance ranges from -40°C to 225°C. Where are adhesive tapes used? Adhesive tapes are...

ALKUMA was founded in 1936 by engineer Heinz Müller and master electrician Wilhelm Müller. Since its inception, ALKUMA has been engaged in the manufacture and distribution of fittings and components for high and low voltage systems, transformers, generators, as well as elements for anodizing and electroplating technology, and the construction of cable, overhead line, and contact line systems. Aft...

... order confirmation. EN 13599 The bands must be clean and free from detrimental defects, which must be agreed upon between the customer and the supplier in the quotation request and in the order. A small residual layer of lubricant usually remains on cold-drawn products, which is acceptable unless otherwise specified. Discolorations are acceptable as long as they do not impair the use of the product. Tin coatings for bands and copper bands and copper alloys: Type of coating: Electrolytic s/EN 14436 and hot-dip s/EN...

...High Precision Pure Rolled Copper Foil Tape - Copper metal...

...The tape can be cut and secured to the ground to the desired length using the plastic nails provided. Slugs and snails cannot tolerate the static electricity caused by their slime on the copper wires. Sufficient for a vegetable garden of approximately 20 m². Presentation: Copper strip – length 16 m – height 4 cm Plastic fixing nails WEIGHT: 0.200 kg DIMENSIONS: 20 × 10 × 3 cm...

...Type 526 is a special DEPAC development designed for sealing pipe threads in the temperature range of -240° Celsius to +260° Celsius. The copper layer also acts as an active corrosion inhibitor and anti-seize. Pipe threads can be easily disassembled even after years. Typically, one and a half to two wraps are sufficient.

...-paintable after polymerisation has been completed. The high versatility and excellent adhesion to different media make Protech Flex the most suitable adhesive sealant for flooring and roofing joints made of concrete, wood products, steel, stainless steel, aluminium, anodised aluminium, galvanized steel sheets, copper, plastics, etc. The application supports must be perfectly clean and dry, free from...

...Low width flexible flat cables, Picoline®, are made with flat copper conductors insulated with a polyester tape. They have been designed for airbag rotary connectors used to release the driver’s airbag housed under the steering wheel. They have the following advantages: reduced friction due to round external profile, less noise in the cassette. They can be punched to facilitate positioning Picoline® can be overmoulded. Picoline® low width flexible flat cables are mainly used for automotive applications.

... heat dissipation due to high copper content in the FPC and heat-resistant 3M double-sided tape","lifetime estimate L70 at Tc < 80 °C: > 60,300 h"],"article_number":"50400528","energy_efficiency_class":"A+","roll_length":"324cm","color":"warm white | 827","color_temperature":"2700K","lumen":"2,754lm","lumen_per_watt":"85lm/W","lumen_per_meter":"850lm/m","watt_per_meter":"10W/m","CRI":"83","dimensions":"3240×8×1.4mm (l×w×h)"}...

...•Datasheet Rigid-Flex: •Layer: 1-10L •Technology Highlights: impedance controlled (±10%), HDI, Copper filling, resin filling •Materials: Adhesive flex core, Adhesiveless core Panasonic, DuPont, Thinflex, 3M tape, FR4 •Final Thickness: 0.4-3.0mm •Copper Thickness: 18um-70um (inner layer); 18um-105um (outer layer) •Minimum track & spacing: 0.075mm/0.075mm •Max. Size: 200 x 1000mm •Surface...

...Flexible copper strip, braided tape, mass tape, grounding tape, round stranded wire made from tinned copper wires. Press-welded or crimped with CU sleeves, with insulation available in silicone or PVC. The flexible copper connectors consist of tinned copper single wires with a diameter of 0.15 - 0.2 mm that cross over each other. The result is a very flexible electrical conductor. Since the...

...CUPEX is used for medium and high voltage cables as a shielding/moisture barrier or as a moisture or chemical barrier for the cable core. It consists of a single-sided coated copper tape with a special, green-coded ethylene copolymer. The coating forms a strong moisture-resistant bond with the copper substrate that does not detach from contact with the copper. The coatings also create strong...

...REINFORCEMENT:copper braid or tape PRODUCT SUITABILITY:Telecommunication cable ladder:solid, bare copper wire Ø 0.8 mm Insulating sleeve:PE ( 2Y ) Verseilung:four cores to star fours each; Star quads stranded in layers to form a cable core umbrella:Wrapping with copper tape ( C ) Mantel:PE, black ( 2Y ) laying:Suitable for laying in earth, water, cable ducts, pipelines, etc. imprint:<Telephone receiver> <meter...

... possible to activate the sensor immediately after the engine start which provides useful feedback to reduce emissions. 1.Based material: a.white alumina ceramic b.the content of alumina is no less than 95%. c.the tungsten slurry is printed on the ceramic tape, laminated by hot pressing, and thensintered under the protection of a hydrogen atmosphere at 1650 ° C 2.Ni-wires:N6 Ni-wires with 0.6mm diameter 3.Brazing material: siliver-copper braging alloy Voltage(VDC)::12V Material::95% Alumina Ceramic Power Source::Electric Density::3.7g/cm3...

...Spiral tubes are made from galvanized stainless steel or copper strip wound in a spiral with continuous helical stitching for a tight seal. The external raised stitching gives the pipes significant rigidity and crush resistance, three times greater than that of a traditional rolled tube. Tubes can be produced starting from a minimum diameter of Ø 80 mm, up to a maximum Ø of 1400 mm. Our spiral tubes have been used for the foundations of the C metro line in Rome, where concrete is poured into the tube, allowing the construction rebar to pass through inside.

... Bronze:Bars: 0 20-150 BRAZHMC, Bronze tape: 0.05-0.5 × 20-150 BrOF Copper:Copper bar: 3-12×20-120×3000; 4000 M1, M2, Copper bars: 010-100 M1, M2 Copper:Copper pipe: diameter from 10 to 110 wall from 0.5 to 10 M1, M2 Copper:Copper roofing tape: 0.5-0.6 × 600; 0.65×600 M1, M2 Copper tape 0.15-3.0×30-300 M1, M2 Copper:Copper plates: 12.0-100 M1, M3...

...This tape features the adhesive formula on both surfaces and is designed for sealing between two substrates of either similar or dissimilar materials AdhesionXtreme® Tapes provide an immediate, permanent and guaranteed waterproof seal to all common roofing and building material substrates including polymer & rubber based membranes such as PVC, TPO & EPDM as well as bitumen, concrete, brick, tile, glass, wood and all metals including zinc, copper, lead & galvanized surfaces. Thickness:1.5mm ...

...Always at your service: Since the 1990s, we at PARTZSCH Spezialdrähte e. K. have been manufacturing copper wires, providing a fundamental component for electrical machines and drives. Over the years, we have continuously evolved into a significant player in the copper-processing wire industry. Annually, we produce and refine approximately 10,000 tons of copper wire. We are capable of insulating the bare wires with various materials such as mica tape, PI film, paper, lacquer, and glass silk. Combinations of insulation materials are also possible.

...Kapton® Adhesive Tapes Construction: - Polyimide support film 25 μm. Class H 180°C. - Thermosetting silicone adhesive. - Kapton® = registered trademark of Dupont de Nemours. Uses: - Masking of printed circuits during wave soldering. - Insulation of copper bars on traction motors. - Masking on galvanizing parts. - Holding cables during high-temperature processing. - Briefly withstands up to 400°C.

...Flat-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in three-fold and eight-fold. Width of flat-knitted copper from 20 mm to 100 mm. For electrical shielding.

...Copper Shielding Tape Power Conductors for Transformers Insulated copper foils for shielding and winding Insulation: polyester foil, Nomex ®, Kapton ® Materials are also available as preformed parts.

...Minimum 1000 m then in multiples of 1000 m PYRO telephone signaling cable 2 pairs 9/10°, shielded with copper tape, classified CR1/C1 fire-resistant according to standard NF-C-32070 and IEC-60331, orange ZH sheath halogen-free Ø 7.1 mm Ref: PYRT2P9-10...

...We offer glass pipe bends and glass fittings (branches, reductions) for all diameters in the field of pneumatic conveying systems. Glass pipe bend 45°, glass pipe bend 90° for maximum service life other diameters and radii available upon request for the use of abrasive media Radius 250mm / 500mm Leg extension approx. 200mm Material: Borosilicate glass 3.3 Pipe ends fire polished with glued copper tape on the outer radius...

...Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free ...

... miniature coils with magnetic cores, cores made from a wide variety of materials are possible, including mu-metal, ferrite, or amorphous materials. Customized coil solutions can be developed with conductor configurations for manual assembly or with SMD build coils for delivery in tape and reel, enabling automated reflow processes for PCBA.