contactless level measurement

...Radar sensor for measuring the level in silos and containers. Available for silos up to 120 m height. Can be used for a wide variety of materials, regardless of the size or composition of the material. • 80 GHz allround sensor • continuous measurement • maintenancefree operation through noncontact measuring principles • reliable measurement independent of vapour, dust and noise...

...the economical alternative Replacement for STRATE 1DF2 and 2DF2 pump controllers suitable for connection to all STRATE fill level recording systems: contact-based or contactless the 2DF2 plus also handles dual level measurement: Sensor/pilot tube and sensor/contactor for outstanding operational reliability the current level and operating hours are always shown on the display housing:ABS/Polycarbonate...

... effective pressure principle operates without rotating parts. The sensors can be visualized via a protemp control system or connected to a PLC, depending on the model. A completely contactless flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in the consumer return PT 1,000 temperature measurement in the consumer return 6 x...

...-quality bearings, speeds of up to 10,000 RPM are possible. The direction of rotation is indicated by the potential of the output voltage: a positive output voltage corresponds to clockwise rotation, while counterclockwise rotation results in a negative voltage level. The shaft is equipped with keyway slots in every measurement range, and matching keys are included. If no connection via key is desired...

...The new standard in quality inspection With our contactless, area-based measurement system for high-resolution optical 3D surface measurement in the micro and nano range, we offer our customers the choice of a measurement protocol or the delivery of digitized 3D data.

...1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 1 On request also available: 1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 2 2500 Nm max. on 1 3/4“ shafts according to ISO 500-3:2014 Type 3 contactless signal transmission built-in measuring amplifier rotation angle measurement (optional) extended EMC strength adjustable output level of rpm and angle signal (5V-24V...

...Wear-free, contactless level measurement for heavy-duty applications. Microprocessor technology, customizable tank characteristic curves, integration into CAN bus or onboard networks. Innovative level measurement, wear-free and contactless without moving mechanical parts. Specifically developed and optimized for heavy-duty applications. State-of-the-art microprocessor technology, custom design...

... according to the motor parameters. The system is contactless therefore alignment is not critical and the inertia is very low (no friction, no residual or drag torque).... more info: www.magtrol.com Speed:≥ 400000min-1 Braking Power:20W (5min) / 40W (15s) Nominal:20mN·m Accuracy:±0.2% Very Low Inertia:~8x10-9 kg·m2 Standard:Dentistry - Handpiece and Motor Testing according to ISO 14457:2017 Optional:Motor or Handpiece Fixture...

... laser light originating from the other scanners is excluded. The QuellTech laser line scanners produce 3D point cloud of the raw ingot surface, and the software calculates the coordinates of the highest and deepest levels of this surface. After scalping the flat surface can be scanned again for any defects. Benefits for the Client: Thanks to QuellTech’s wide area laser line scanners, the cycle times for ingot scalping could considerably be reduced, and excessive material scrap due to a too low scalping level is prevented.

...Path measurement can be solved with various sensors. The inductive linear position sensors operate contactless and wear-free according to a revolutionary measuring principle. The position is not detected via a positioning magnet but via an oscillating RLC circuit. The product portfolio comprises magnetostrictive linear position sensors for position tracking in hydraulic cylinders or encoders for...

...The UFM is an ultrasonic sensor for continuous and contactless level measurement of liquid media. The sensor consists of a transducer that continuously sends short ultrasonic pulses to the surface of the medium being measured. The pulses are received back by the sensor as echoes. • The time between sending and receiving is measured. This travel time is proportional to the distance and thus to the fill level. Output: standardized 4–20 mA signal. The measurement output and the power supply are provided over the same line.

...The FDU91 ultrasonic sensor is designed for continuous, contactless, and maintenance-free level measurement of liquids, pastes, slurries, and powdered to granular bulk materials, as well as for flow measurement in open channels and weirs. The measurement is unaffected by the dielectric constant, density, or moisture, as well as by the formation of deposits, due to the self-cleaning effect of the sensor. Suitable for explosion-prone areas. Maximum measurement range in liquids is 10 m, in bulk materials 5 m.

...Contactless temperature measurement and disinfection by misting. European design and manufacturing, installation by a technician. High-end design, made of thermoset steel or composite for easy mobility. • On/off button. • Automatic temperature measurement via the camera. • Light signal allowing passage. • High-pressure misting disinfection during passage. • Reservoir allowing up to 1,200 passages with level gauge.

... correlated with VIP’s vacuum level, such monitoring is crucial for ongoing panel performance and quality evaluation. To address these challenges we have developed a low-cost, contactless sensor Stripres® for measuring vacuum levels in VIPs, both during the manufacturing process and over the course of a VIP’s lifetime. Stripres® sensor is designed to be permanently installed into VIPs during panel production, and subsequently allows for vacuum measurement at any time and almost any place, thanks to contactless measurement process. ...

...The mobile measuring device RP-30 (Radar Profiler) creates a speed profile of rivers and streams to determine the flow rate in conjunction with cross-section and level data – a very useful measuring instrument, especially for use in flood situations.

...The easy solution for the RTM process Your advantages • Easy to operate • Mobile and robust design • Practically wear-free and easy to clean • Reproducible manufacturing • No power connection required • Optical level control through viewing window • Cooling or heating of the matrix possible (water bath / heating) • Integrated vacuum generation possible • Installation of measurement and control technology possible • Custom configuration...

... switches are used for presence detection (e.g., seal detection), positioning (e.g., PET bottles), counting (e.g., plastic covers), level sensing (e.g., lubricants), or distance measurement (e.g., thickness measurement) of solid and liquid materials. Type of voltage: DC Design: Cylinder, thread Number of pins: 3 Housing material: Stainless steel (V2A) Metric thread size: 12 Electrical connection...

... booster pump Stainless steel connection fittings Contactless ultrasonic level measurement Large cleaning cover Four container sizes suitable for osmosis You can find technical data for this product in our information center.

... signal changes. The electrically effective rotation range of the encoder is 3600° by default. Type: absolute, multiturn, solid shaft, contactless Technology: Hall effect, gearbox Mounting: bearing bushing Output signal: analog, with voltage output, with current output Protection level: IP50 Additional features: compact...

...Generator, gasoline engine, portable, HONDA GX390 / 11 HP, 5 DIN frame (all controls Control functions at a glance, tank positioned at the bottom for better temperature resistance, multifunction control system E_MCS 4.0, tank level indication via ultrasonic measurement), continuous power 6.0 kVA for a variety of applications, DUPLEX combines and enhances the advantages of synchronous and...

... linear and angular position detection through a contactless system using magnetic measurement technology, thanks to our magnetic encoder sensors, magnetic tape, high-precision magnetic rings, absolute and incremental systems.

... over 400,000 DUT-E fuel level sensors, 90,000 DFM fuel flow meters, and 200,000 Crocodile contactless readers. Our products are supplied globally – 20 Dealers and Distributors, more than 800 Partners in 150 countries. Our mission: We aim to increase the efficiency of vehicles’ and machinery operation against the backdrop of growing fuel costs and maintenance expenses, as well as the increasing complexity of automotive design and operating conditions. To accomplish that, we develop, manufacture, and integrate fuel monitoring and vehicle performance tracking solutions.