closed cell foam

...FOR THERMAL AND ACOUSTIC COMFORT IN HVAC SYSTEMS Our high-quality XPE foam addresses both thermal and acoustic challenges in HVAC installations, ensuring energy efficiency and a quieter environment. KEY FEATURES - Thermal insulation The closed-cell structure of RoFoam minimizes heat transfer, reduces energy consumption, and maintains desired temperatures in air ducts and pipes. - Acoustic...

...Water jet cut parts made of foam rubber for use in machinery and plant engineering. Foam rubber is a mixed-cell elastomer with predominantly open cells and a closed outer skin. It exhibits high elasticity and aging resistance, as well as excellent density properties (when the skin is undamaged). Due to the small diameter of the cutouts, they are water jet cut. Alternatively, they can also be cost-effectively and accurately punched. Available as sheet material as well. At the customer's request, for easier assembly, they can be equipped with self-adhesive backing on one side or both sides.

...Medium density PVC foam with closed cells. The product is gray. It is coated with an acrylic adhesive on one side and protected by a paper interlayer on the non-adhesive side. FEATURES - Prevention of electrolytic corrosion - Noise damping - Filling of voids - Anti-slip mounting ADVANTAGES - A minimum compression of 30% is required for sealing - Service temperature: -30°C to +70°C - Application...

...Filtene Fondogiunto Closed cell polyethylene foam kerb, compressible, to properly size the depth of the expansion joints (creation of the "third wall" or base material) before filling them with the polymeric sealants Protech Flex, PROTECH SIGILFLEX MONO or EG 91. It is available in profiles of circular cross-section of different diameter that will fit joints of any shape and size. Suitable for...

...Our PE foam DIM Lam - Velvelin® is a closed-cell foam with excellent properties such as - very low density - particularly resistant to moisture - outstanding weather and aging resistance - good sound insulation and thermal insulation - very good resistance to common acids, alkalis, and other chemicals With us, you can obtain polyethylene foam either laminated or extruded. PE foam can also be...

...Cortec VpCI® 130 AntiStatic Custom ESD Foam Inserts Safeguard sensitive electronics with Cortec VpCI® 130 AntiStatic Custom ESD Foam Inserts.Engineered by Cortec, these inserts offer unparalleled protection against static electricity and physical damage.The advanced antistatic formulation effectively dissipates static charges, preventing harmful ESD events. The closed-cell foam cushions and...

... rolls have exceptional stability. They are impervious to water, air and dust. The Choice of Industry Leaders in a Wide Variety of Markets Transportation Construction Athletic Water Sports Medical OTHER CLOSED CELL SPONGE APPLICATIONS Conveyor Belt Cushions Die Ejection Materials Rail Car Repairs Oil Seals ...

... airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements Origin:Germany...

...STIFERITE Class B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a bitumenous mineral fibre facer, ideal for hot torch applications, and saturated mineral fibre facer on the bottom side. The Class B panel is suggested for roofs under bituminous waterproofing mantles and where high resistance to a flame torch...

...PE foam is a closed-cell material with a fine surface. We offer raw materials and finished products for various types and qualities of PE foam.

...TOBY Foam produces molded parts made from polyurethane integral foam (semi-rigid) in Shore hardnesses ranging from approximately 20 Shore 00 to about 90 Shore A, as well as molded parts made from rigid foam. Polyurethane is created from two liquid components – polyol and isocyanate – which undergo a chemical reaction to form an open or closed-cell foam. Polyurethane is extremely versatile and is...

...Optimal values for maximum comfort: Extruded closed-cell polyolefin foam with aluminum metallized foil To compensate for unevenness in the substrate up to 1.4 mm Roll format Fixophon: 1 m x 25 m, thickness: 2 mm, 4 rolls per bag Roll format Fixophon Pro: 1 m x 15 m, thickness: 2 mm, 1 roll per bag Thermal resistance: 0.045 m² K/W (Fixophon) Thermal resistance: 0.054 m² K/W (Fixophon Pro) CFC and...

...2 in 1: antifatigue and antistatic function quick and efficient dissipation of static electricity thanks to the upper surface which is connected with a ground cord exceptional comfort thanks to high quality nitrile foam improves employee productivity bevelled edges to avoid the risk of falling Resistivity from 106 to 109 Ohms conforms to standards EN 1000151, IEC 6134052 and EN 1815 Composition:4 mm vinyl surface on 10 mm 100% nitrile closed cell foam Color:black...

...Effective cleaning and removal of hard mineral and organic deposits. . Specifically designed for line filling. . Water drainage. . Air evacuation. . Hydrostatic testing. TECHNICAL DATA: Our foam scrapers are made from closed-cell elastomer foam or EPDM. Both materials meet the specific requirements of the chemical industry regarding abrasion resistance, aggressive fuels, and chemicals. They are specially designed to navigate short radius curves and significant diameter variations. Special surface coatings can be provided when polyurethane or EPDM are not acceptable.

...PE foam black 0.8 mm double-sided adhesive covered with a white moisture-resistant siliconized polyethylene paper Adhesive: Solvent pure acrylic Thickness: 1.100 mm Adhesive strength: 20 N/25 mm Temperature range: -40° C to +95° C The mounting adhesive tape consists of a black closed-cell polyethylene copolymer foam, which is coated on both sides with pure acrylic. The adhesive guarantees high...

...Execution: High-density foam rubber, suitable for almost all knee pad pockets, environmentally friendly, highly flame-retardant, dirt-resistant due to closed-cell foam, impact-absorbing, shape-stable, point-elastic Dimensions: 20 x 15 x 2 cm Info: Remove the knee protection before washing clothing! Outer box: 40 pairs...

...The Think-N-Roll easily attaches to the front of any standard classroom chair and provides a foot roller for "busy" feet. Made from soft, closed-cell foam, PVC and bungee cord, the Think-N-Roll provides a quiet ride! Ref.:M592445 Brand:Stimove...

...PVC foam tape made of medium-hard, closed-cell foam, coated on one side with acrylic adhesive. Density against water and air.

...Cellular Materials (Cellular Rubbers and Foam Rubber) We stock various cellular materials. We also process these materials in our production center. Most products are closed-cell, making them ideal for sealing technology. Different surface variants (with skin and without skin) are also available as standard. The various materials are used depending on the applications. Available Materials...

...TRI-SEAL® is a patented three-layer, co-extruded material consisting of a core made of closed-cell PE foam, which is covered on both sides with a PE-EVA layer. This is a closed composite that cannot delaminate. TRI-SEAL® has been specifically designed for use with aggressive media. The foam core ensures the elasticity necessary for use as a seal. The solid surface prevents the evaporation of the medium.

...Closed-cell polyethylene foams available in both cross-linked and non-cross-linked versions. Density: from 20 kg/m³ to 110 kg/m³...

Since its establishment in 1978, Adil Foam has set fulfilling its customers’ needs as the primary goal and accordingly broadened its product range continuously through R&D and machinery investments. Product development has always been our main strength as a result of R&D focus. With its commitment to total quality and customer-focused mentality, Adil Foam has become one of the leading solution p...

...As plus packing company one of our main material is EVA Foam which is Closed Cell Foam Sheets come in a range of medium and firm densities, and in thicknesses up to 100mm. It has high density and more applicable to heavy industrial products that other foam materials. EVA Foam Features .High density .More protection. .It can be shaped for any products...

...Flat Foam Slide Mats are constructed with a super strong foam material that lasts longer and performs better than other materials. Unlike other mat materials, our mats do not tear easily. Our mats are made with a dense closed-cell foam material that is extremely tough and durable.

... artificial rubber. We produce foils and profiles for packaging from polyethylene foams, as well as insulation for pipes. Packaging foils are made of extruded polyethylene foam foil with closed cells, and are available in the form of hoses, bags and strips, in different sizes and shapes according to the customer's wishes. Packaging profiles are made of extruded polyethylene with closed cells, and we have standard shapes: L-profiles, U-profiles, G-profiles, glass bottle profile and other special profiles.

...Navycell® is a light blue insulation product made from closed-cell, chemically cross-linked polyethylene foam. It is laminated on one side with a 20 μm thin, smooth aluminum foil and coated on the other side with a self-adhesive film. Since it was specifically developed for use in applications with special safety requirements, such as in the shipping sector, navycell® meets all the requirements...

...Self-adhesive sealing tape made from closed-cell EPDM foam rubber. Perfect for sealing against moisture and dust. Available in various thicknesses and widths. Also available in single-sided or double-sided adhesive versions, depending on customer requirements!

...This floating barrier consists of a series of flexible foam buoyancy tubes made from closed-cell foam, inserted into waterproof envelopes made of PVC-coated polyester fabric treated for hydrocarbons (900g/m2). It is reinforced with a galvanized marine steel ballast chain running the entire length. The compartmentalization of the elements allows this skirted barrier to follow the movements on the...

...Foam-O profiles made of closed-cell PE-LD foam for edge protection of sensitive products or tubular components.

...The Dynacoustic door curtain, consisting of a PVC textile coated with foam at its rear, ensures a noise reduction up to 13dB compared to a standard door curtain. Its closed cell structure avoids the absorption of water and the emergence of mould. The thermal transmittance of 2,94 W/m²K also reduces condensation on the curtain. The curtain itself remains tightly tensioned. This results in important advantages such as an improved working environment, reduced energy costs, easy cleaning and an aesthetic appeal.