change collet

...Expanded production range EasyFix screw clamps are now standard for spindles with a diameter of 12mm and M8 internal thread. We currently manufacture EasyFix screw clamps from M8 to M24 and deliver the appropriate EasyFix quick-change flange with fixed flange/collet to match your motor or machine in the shortest possible time. For HSK or SK milling spindle ends, we now offer suitable EasyFix...

... twin tools lie at the machine, thus significantly reducing the down-times. A further advantage is provided by the variety of adaptations; so the optimal tool clamping can be selected for each operation. The inserts available include: Collet chuck holders Weldon/Whistle Notch Milling arbors Morse tapers Hydro extension Shrink adaptations The most important advantage is certainly created by the easy handling. The inserts can be changed with just one hand without counter pressure by the spindle.

... automatic tool change option. The machine body is a welded structure made of steel profile; the weight of the machine is 1500 kg. The maximum travel speed along the axes is 50 000 mm/min; the maximum travel speed during operation is 20 000 mm/min. The spindle speed reaches 24 000 rpm. The machine is controlled by NCStudio software. On request, the machine can be equipped with a vacuum table, a DSP-controller, a Syntec control system, an aspiration system, a more powerful spindle or an additional spindle, a rotary device to process cylindrical objects, and a tool sensor.

...We offer you collet chucks as well as collets. Additional features: ◾ Expands the application possibilities of the Bornemann 444 and Bornemann 440 milling motors – no spindle change necessary. ◾ Allows the use of cutters with cylindrical shanks in the milling motor with hollow shaft.

...Automatic clamping takes place over disc springs, which are adjustable in the pre-loading and are solved pneumatically to the workpiece change. Manual clamping is made by a knurled knob on the opposite side of the collet. Due to the integration into the existing through-hole of the rotary table, the rotary table with the clamping system remains very compactly. Compact High run-out accuracy Easy to operate Retrofit possible...

...Collets have a +/- 0.5mm range to handle rough bar Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. Changing Collets usiong a gun reduces the change over time to seconds. Klamp DHP collet chucks are suitable for collets which have a +/-0.5mm gripping range. Allowing the collet chuck to handle rough and unfinished bar...

... material change due to the automatic centric positioning. Four clamping jaws ensure maximum hold while the collet is being pulled onto the bar. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura...

...{"ZIA 219M":"Collet chuck CM 2\nfor manual lubrication - Weldon 19 mm\n\nZIA 219-KN\nCollet chuck CM 2\nfor automatic lubrication - Weldon 19 mm\n\nZSS 200\nCollet chuck CM 2\nKeyless - quick change tool holder\nfor automatic lubrication - Weldon 19 mm\n\nZIA 319M\nCollet chuck CM 3\nfor manual lubrication - Weldon 19 mm\n\nZIA 319L\nCollet chuck CM 3\nextra long for manual lubrication - Weldon 19 mm\n\nZIA 319-KN\nCollet chuck CM 3\nfor automatic lubrication - Weldon 19 mm"}...

...Adjustment range of the flexible guiding clamp ± 0.5 mm • Guiding clamp runs synchronously with the spindle and adapts to the material during processing • Quick change from clamp to clamp. Adjustment range: ± 0.5 mm...

... the precision and safety of drilling, milling, or turning operations. There are several types available, including key chucks, self-tightening chucks, and three or four-jaw chucks, each designed to meet specific needs in terms of clamping force and tool change speed. High-quality chucks are made from robust materials like hardened steel, offering great wear resistance and increased longevity...

... without the need for realignment. Special feature: the form-fitting clamping with a clamping collet or clamping segments. This means a rigid clamping and higher repeat accuracies. As a result, there are no imprints on the clamping bolts compared to zero-point clamping systems with balls or sliders, which can lead to inaccuracies and, consequently, the need to replace the clamping bolts. Additionally, there is no way for dirt and chips to get through, which in turn leads to reduced wear and less maintenance effort.

...Smooth high speed rotation and low vibration enables precision grinding. Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications. Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system. Collet Size:3 mm Free Speed (rpm...

...Male chuck holders with adjustable clutch for spindle attachment ø19mm (G1), ø31mm (G2), and ø48mm (G3). Available from M2 to M36. Available upon request: male chuck holders without clutch and in ISO or JIS sizes. - Quick-change male collets ERF. Available from M2.5 to M12 for absolute precision machining. ERF20 and ERF32 also available upon request. - COLLET CHUCK ER20-ER25-ER32-ER40. - Self-tightening drill chuck available in versions with ø19mm or ø31mm attachment and for drill bits from 1-10mm or from 1-13mm. - Chuck holders for thread from M2 to M24.

... servo drives with absolute encoders, ball screw for each axis Drive elements: X/Y/Z Ball screws 16 x 10 / 16 x 10 / 16 x 5 mm Milling spindle: 2kW HF spindle 50,000 rpm (water-cooled) Tool change system: HSK 25 with 10 tool slots Maximum tool length [mm]: 90 (for HSK25 collet holder) Length measuring probe: Yes (zero point probe) Weight [kg]: approx. 720 Connection values: 400V / 16A...

... milling diameter 16 mm – CE standards OPTIONS – Voltage 400 V – 50 Hz three-phase – Voltage 415 V – 50 Hz three-phase – Milling motor 5.6 kW (7.5 HP) – Manual tool change – Additional milling unit 2.2 kW (3 HP) with ER 25 collet + 3 mm cutter – Screwdriving unit with loader – Controlled milling head tilt (-10 ° +90° – 4 axes) – Y axis capacity 400 mm – Y axis capacity 600 mm – Y axis...

...Drill chucks, machine vises, collets, inductive shrink systems, quick-change tapping chucks, tool assembly devices, Captis collet Clamping tools: Reduction and extension sleeves Clamping sleeves Knock-out pins, taper pins Drilling and tapping chucks Centering points, drivers Tool holders for lathes Workpiece clamping Turning and grinding spindles, clamping spindles Lathe chucks, tool holders for lathes Tapping chucks Tool holders Shrink devices Pre-setting devices Magnetic and vacuum clamping systems Sub-devices Slide guides Mechanical clamping elements...

...The spindles of the DTC series feature a pneumatic direct change for use in semi-automated or fully automated production processes. As standard, the spindles are delivered with a WZF06 collet, which has a clamping range of 3 mm to 6 mm. For use in your semi-automated or fully automated production processes, we offer the DTC series with pneumatic direct change.

... chucks with quick-change jaws, low-profile chucks, compensating chucks, swivel chucks, shaft clamping chucks, inclined pin chucks, membrane clamping chucks, collet chucks, gripper chucks, hand or power-operated sleeve clamping mandrels, full clamping cylinders, and much more.

... holders, end mill chucks with lengths up to 350mm, high clamping chucks, hydraulic chucks, self-tightening drill holders, Weldon and whistle-notch end mill holders with quick-change bushings, fixed and combined end mill holders, for Morse taper and threaded connection, for thermal shrink fit, modular and raw stem workable Adapters for various connections Extensions HSK chucks DIN 69893 / TC DIN 69871 / BT MAS 403-JIS 6339 / ISO DIN 2080 / R8 DIN 228 / MORSE TAPER DIN 6327 / VDI DIN 69880 COLLETS ER DIN 6499B / EOC DIN 6388B / DIN 6343 BUSHINGS FOR BARENS...

...The company's activities were strongly focused on the export business of turned parts shortly after its founding. Over the years, business operations have expanded in many countries. The domestic business in the areas of turned parts and collets has also been steadily developed. With the takeover and change of management as of January 1, 2008, the strategy was adjusted to meet today's market...

...Clamping tools, clamping elements, clamping technology, drill chucks, collet chucks, induction shrink technology, thread cutting machines, tool holders, taper shanks, reducing tools, short clamping chucks, setting sleeves/clamping sleeves, short drill chucks, hydro-expansion chucks, quick-change thread cutting chucks, pendulum holders, quick-change chucks, center points, quills, face drivers...