bus slave

...CT-5720 Bus extended slave module Module Description The bus extened slave module is used to extend the bus.The bus extended slave module has no process data and configuration parameters. Product Model:CT-5720 Mounting Type:35mmDIN-Rail Size:115*14*75mm Weight:65g Operational Temperature:-40~85℃ Operational Humidity:5%~95% RH(No Condensation) Protection Class:IP20...

... been certified previously thus considerably reducing the efforts of developing, verifying and approving a safety application. The main controller's CODESYS environment and the EtherCAT link are used for programming. Function:functional safety PLC  Model:Control cabinet module  Field bus interfaces:EtherCAT / Safety over EtherCAT (FSoE)  Software:CODESYS version 3.5 SP8 or higher  Status indication:LEDs allocated to the point of termination  Dimensions (W x H x D):25 x 120 x 90 mm ...

...square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. Reduced cabling and easy configuration – each slave is addressed automatically – simplify the installing operations. The stout aluminium case ensures a high protection...

... pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 532 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar bis 0 ... 400 bar — accuracy: 0.25% FSO — output signal: digital i²C — bus frequency max. 400 kHz — configuration of data format — interrupt signal — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions...

...The ECS-PCIe/FPGA is an EtherCAT Slave Controller board designed for the PCI Express bus. It utilizes a Beckhoff IP-Core which is implemented in an Altera® FPGA and configured for 8 FMMUs, 8 Sync Managers, 60 kB DPRAM and 64 bit Distributed Clocks. The FPGA connects between the PCI Express bus and the two Ethernet interfaces on the front panel. Because of this simple hardware topology and the...

... hardware features one CAN interface each. The core component is an ARM11 processor with a clock speed of 532 MHz. The PLC comes with 128 MB DDR2-SDRAM and 32 MB NOR-Flash as standard. Optional memory upgrades are available, allowing expansion to 256 MB DDR2-SDRAM and 64 MB NOR-Flash, and further enhancement with an SD card. The housing, rated IP20, measures 98 x 210 x 35 mm. The handheld device is equipped with a flexible connection cable through which it is powered and connected to the bus.

...Scope of delivery: Software and user manual on CD-ROM, SD card Can be configured as a Master or Slave terminal Up to 8 terminals can be connected via CAN bus Up to 64 dispensing points possible Up to 10 subnets can be managed via the PC application User identification possible via PIN or RFID card User-friendly PC application for configuring and setting up tank, contents, users, and dispensing...

... network or by Ethernet through BACnet protocol; DMX, which allow an exchange of information between one or more slave devices communicating on a RS485 differential serial network or by Ethernet through DMX protocol; M-bus, which allow an exchange of information between one or more slave devices communicating through M-bus protocol; Profinet, which allow an exchange of information with a master device communicating by Ethernet through Profinet protocol; DALI, which allow an exchange of information between one or more slave devices communicating through DALI protocol.

... numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle. The main screen also enables interaction with shortcut functions, such as test program change, "smart" test archive menu and locking/unlocking using a password. Limitless connectivity. The new T8990 equipment includes ports for the USB slave, RS232, RS485, Can bus, TTY, Profinet and EtherCAT. Assembly may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers...

...MBus pulse converter for metering applications in slave configuration. Handles up to 2 pulse inputs (reed switch, clean contacts – open collector).

... higher load capacity - Reduced water consumption depending on load power and water inlet temperature - CAN Bus interface for control and monitoring - Protected against thermal overheating - Determination of the...