ball valve stainless steel

... variant available. Areas of application: Switching speed not critical, suitable for long-term switching states, high flow rate, low susceptibility to particles. Lifespan: 50,000 switching cycles, easy replacement of the actuator, high-quality materials, and reliable sealing. Technical Data: FSA Motorized Ball Valve Set Stainless Steel 304 3/4" 9 - 28V Actuation: Open/Close Switching time: 8...

...Rob. 3-Way Ball Valve PN 63 Stainless Steel 316 + Pneumatic Actuator Actreg Dimensions: 1/4’’ to 2’’ Connection: BSP threaded Fluid Temperatures: -30° C / + 180° C Ambient Temperatures: -20° C / + 80° C Compressed Air Motor: min 1 bar / max 8 bar Actuation: Double and single acting Certification: ATEX Zones 1, 2, 21, and 22 Material: Stainless Steel Pneumatic Actuation: 1 bar Maximum Supply Pressure: 8 bar Minimum Outdoor Temperature: +0° C Maximum Outdoor Temperature: +80° C...

...2-Way Ball Valve Smooth End / Threaded End Stainless Steel 304 316L PTFE and NBR Seals as Standard PN16 Contact us for your application ORDER EXAMPLE: 264375-40 Available Sizes: from DN40 to DN100 mm Standards: CE 1935/2004 Temperature: from -20°C to +90°C...

...Stainless steel ball valves with threaded ends, welded ends, or flange connections. Available in 1-piece, 2-piece, or 3-piece designs with reduced or full bore. For example, a 2-piece flange ball valve according to DIN 3202-F4/EN 558-1 in stainless steel 1.4408 (AISI 316), PN 40 with full bore. Available in sizes DN15 to DN100. The ball valve can be opened or closed using a hand lever. The hand lever is rubber-coated and can be locked (in either the fully open or closed position). Suitable for pressure ranges up to 40 bar (temperature dependent).

...Stainless steel ball valve AISI 316-CF8M, F/F threading, full bore. Temperature limits: -20° to +160° Vacuum: 10-2 torr...

...The three-part 2/2-way metal ball valve GEMÜ 798 is actuated electrically. It features a plastic drive housing. A manual emergency operation and an optical position indicator are integrated as standard. The seat seal is made of PTFE. • High flow rate • Ball with full passage Connection type: Flange Actuation type: Electric Body material: 1.4408, precision casting Max. operating pressure: 16 bar Max. media temperature: 150 °C Min. media temperature: -20 °C Nominal sizes: DN 10; DN 15; DN 20; DN 25; DN 32; DN 50; DN 65; DN 80; DN 100...

...Single-piece compact ball valve with flange connection, full bore Size (DN - inches): DN 40 (1 1/2")...

...Flanged Ball Valve KFK Series...

...We manufacture inlet tables and outlet tables for all brands in all designs and any custom dimensions. For example, for Winterhalter, Hobart, Meiko, Stierlen, and many more. Custom-built inlet table with box edge and roll edge at the transition from the worktop. KWC faucet. Basket shelf in any desired length with drainage optionally on the left or right. Optionally with or without ball valve.

... switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings. Load :Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Max. fork height (h3):mm. 115 Min. fork height (h13):Min. fork height (h13) Total lenght (l1):mm. 1550 Rudder height (h14):mm. 1160 Front wheels material:in nylon Rear rollers material:nylon/stainless steel...

...The RIZZATO stainless steel ball valves comply with MOCA regulations, are made of AISI 304/AISI 316L stainless steel, and are used in the food, wine, chemical, and pharmaceutical industries. They consist of a body, a perforated ball, 2 side connections, 2 PTFE seals, and an opening/closing system. The opening/closing of the stainless steel ball valve can be achieved: • MANUALLY, with a handle...

...Reference: 004850 TECHNICAL SPECIFICATIONS - 304 stainless steel tank with pneumatic system - Model: SPABP1000 - With welded feet - Effective capacity: 958 liters - Tank with convex bottom - Atmospheric pressure - Corked exterior finish - Bright annealed interior finish - 1 drain with stainless steel ball valve, outlet 40 MACON - 1 drain with stainless steel ball valve outlet 40 MACON - 1 floating cover made of 316L stainless steel and complete pneumatic system (stainless steel lid, pump, air chamber, valve) - 3 welded feet DIMENSIONS - Diameter: 1000 mm - Total height: 1700 mm...

...ADDITIONAL INFORMATION Fully detachable model (mounting between struts) Disassembles like a simple sight glass with 2 flat wrenches 100 mm at the back including 60 mm of GAS 1"1/2 thread & 40 mm smooth ANTI-ROTATION STAINLESS STEEL LUG FULL BALL VALVE Counter nut & stainless steel washer, food-grade gasket included Reference: A7440A Material: Stainless Steel 304...

...This standard tank from our stock has been equipped in our workshop with the following elements: - Frame-type agitator with scrapers according to customer specifications. - Various connections. - Elevated feet. - Cleaning ball. - Aeration.

...Ball Valves - Stainless steel block ball valve GE5...

...Suitable for water and glycol. Valve drive with mechanical position indicator and automatic reset. Stainless steel body. Voltage: AC/DC 24 V With 10 m Kabel Protection Code: IP 65...

... is one of EMA’s most popular IBC’s. EMA's advanced manufacturing technology provides a one-piece body, 10-gauge (.135”/3.4 mm) stainless steel construction and single-seam welding, for greater strength and durability. The features either a center drain or side drain discharge outlet to meet your individual delivery system needs. All tanks are manufactured with sloped bottoms and 2” (5.08 cm) ball valve discharge and safety cap.

...Ball Valves Pneumatic ✓ Ball Valves Electric ✓ 3-Way Ball Valves ✓ Drinking Water & Gas Ball Valves DVGW ✓ Compact Ball Valves ✓ Flanged Ball Valves ✓ Socket Ball Valves ✓ Welded End Ball Valves ✓ Special Materials. Nominal Sizes: DN8 - DN200 (1/4" - 8") Connection: Flange, Thread, Welded End Length: DIN, ASME Material: Stainless Steel, Steel, Ductile Iron, Brass, Duplex, Super Duplex, Hastelloy Standard: DIN, ASME Ball Seat: PTFE+Glass Fiber, TFM1600, TFM4215, PEEK Actuation: Hand Lever, Pneumatic, Electric, Spring Return...

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

...Full bore ball valve, F/F threading, with extended butterfly, made of polyamide, anti-condensation and anti-drip.

...The forged valve bodies of our high-pressure ball valves are available with various end connections and in materials such as stainless steel 316 and Alloy 400 (Monel). Standard sealing materials include PTFE, PCTFE, and Peek. For the NPT internal thread, various inch connection sizes are available. Alternatively, a FITOK compression fitting, in metric or inch sizes, can be used as a connection. The valves of the BF and BFH series are optionally available with electric or pneumatic drive.

...Ball check valves - 800 lbs 97/23/EC Directive N°0036 - Risk category III / module H - API Spec Q1 - API Spec 6D-0286 (except globe valves) - F316 stainless steel body & inner parts - TRIM 10 - F316, standard 316 seat and stem - Bolted bonnet & gland pack - Rising stem for gate & globe valves - PS: 138 bar - TS: -29°C/+538°C. F316 ball - With inconel spring - Standard port. Type MSP-TD-358 Welding - 359 Threaded Size: 3/8" - 2"...

...We manage and automate a comprehensive range of industrial valves. We are your competent contact when it comes to automation under complex requirements! - Ball valves made of stainless steel, brass, or steel - Shut-off valves with PTFE or soft sealing - Slide valves - Check valves - Special valves etc.

...Including HE pump (Grundfos Alpha 2 25-60) and insulation block Consisting of: • Ball valves with thermometer • Gravity brake • Safety group with safety valve • Stainless steel plate heat exchanger • Connection set MAG (KFE valve, air vent) wall mount Item also available with other product features (performance). Order number: 9010220 Designation: PG WT 20 plate heat exchanger Packaging unit: 1 piece Height: 420 mm Width: 250 mm Depth: 255 mm Performance: 22 kW...

...Two-part DIN flange ball valve, long design, with full passage, CE/PED, TA-Luft, FireSafe tested, with pressure relief system SRS, automatable, available in carbon and stainless steel. TA-Luft and SIL 2 certified, FDA compliant due to double sealing system, antistatic, with ISO head flange for direct drive mounting. With locking device.

...Ball valve ''WAFER SPLIT'' [Valpres Art. 763000], flanged PN 16 in AISI 316 stainless steel, full bore, Fire Safe, Antistatic Device, with electric actuator.

...Includes industrial ball valve MS type 1710ff, socket shut-off valve type 600ff, ball valves made of stainless steel, multi-way ball valves made of stainless steel, socket small fittings made of stainless steel, etc.

...Carbon steel ball valve A351-LCB, blackened, with ball and stem in AISI 304 stainless steel, F/F threading, full bore. NPT Fire Safe and Antistatic Device Temperature limits: -20° to +160° Vacuum: 10-2 torr...

Huan-Tai is rooted in China since 1996, as one of early runners, we bring value to the table through our capability in engineering, quality control and schedule management to meet the high expectations of customers in stability, consistency and predictability. As an industry leader of Custom Castings, we are ISO9001 certified with a complete inspection like spectrometer, CMM, NDT (UT, RT, MPT, LP...

...Check valves with embossed or black printed directional arrows. With conical nozzles. Versatile in use. Pressure resistant up to 4 bar, Operating temperature +0 to +40 °C, with PP valve ball, also available with stainless steel or PTFE ball upon request. For Ø: 6-8 mm, 8-10 mm, or 10-14 mm Printing: embossed or black...