adjustment - machine tools

...It allows the desired amount of vitamins to be mixed into the ground product and blended into the system. This mixture can be easily achieved with the help of a speed adjustment device. The additive is dosed as a degraded powder. There is a special mixer in the hopper section.

... axis Machining hard-to-reach parts Centre boring stepless angle adjustment around the horizontal axis, with tangentially acting double cone clamp MR > 250 Nm Prerequisite: The prerequisite is a "stop block" on the machine. This prevents the entire unit from turning while simultaneously defining the position of the angel of rotation. Variations: basic duplex offset Request form: PDF...

... is Ø 610 mm. After loading, the valve is held by a rotating clamp of the workpiece spindle, which moves on the slide for loading and unloading (axis T). The grinding wheel and diamond tool assembly is mounted on the grinding wheel translation slide, which, with a small movement parallel to the workpiece, allows for the adjustment and optimization of the grinding wheel/valve position. The...

...EKF 500/600 Series: Reversible carbide inserts with 4 sharp edges, rotating support plate Model EKS 645 Bevel angle 45° Bevel width 0-15 mm Cutter type ZFR645 Milling tool Screw-on milling cutter with 10 reversible carbide inserts Net weight, approx. 10.2 kg Operating voltage 220-240 V / 50 Hz Power consumption 2300 W Speed Continuously adjustable speed 1600-3000 rpm with electronic adjustment system Manual feed Protection type IP 20...

...easy adjustment for different stock widths and lubricants lubricant dispensation from the inside thru hollow axles – for an even spread series RB SF SW top roll adjustment with pneumatic cylinder Build height:205 mm Pass line:80 mm Roller diameter:60 mm Admissible thickness max:4,0 mm Series RB SF SW Build height:290 mm Series RB SF SW Pass line:130 mm Series RB SF SW Roller diameter:110 mm Series RB SF SW Admissible thickness max:10,0 mm...

...Single-Spindle – Glass Forming Machines manually operated Machine for the production of standard and series items, particularly standard joints, ball joints, spigot sleeves, glass threads, and flanges, shaping NS sleeves on glass bulbs, depending on the machine type suitable for shaping tube ends made of borosilicate glass up to 120 mm in diameter. ​ Advantages: ■ High forming accuracy due to fine adjustment of the forming tools, resulting in consistent, tight tolerances and thus short grinding times ■ Machine operation possible by trained personnel ■ Also well-suited for small series...

... bending processes reduce costs. Automated tool adjustment through "smart" tools increases uptime, improves product quality, and lowers maintenance costs. The individual arrangement of the modules from our modular system for manufacturing your product enables flexible concepts.

...Laser machine for decorating or labeling barrels Laser Class 1 machine for labeling wooden barrel lids or similar: - High-performance CO2 laser - Laser Class 1 system - Very high labeling quality - Includes Z-axis for adjustment to different barrel heights - Powerful extraction system - Loading aid for loading and unloading the system https://www.youtube.com/watch?v=11WUGUcal1Y...

... x 3, hole 20 mm – Vitrified wheel, profile C 100 mm – Vitrified wheel, profile C 150 mm Longitudinal Stroke: 240 mm Transverse Stroke: 240 mm Vertical Stroke: 110 + 20 mm Grinding Wheel Motor Power: 0.55 kW Grinding Wheel Motor Horizontal Rotation: 360° Grinding Wheel Motor Vertical Rotation: 0° Horizontal Divider Adjustment: 360° Vertical Divider Adjustment: 360° Machine Weight: 180 kg Dimensions: 900 x 800 x 1500 mm Height of Divider Axis: 125 + 50 mm Cutter Diameter: 250 mm Cutter Length: 200 mm Knife Sharpening Device (max length): 650 mm...

... the machine Special features of the new size 100 Possible special extension for adaptation to machine geometry (optional) Longitudinal displacement (optional) Also available in mirrored design [ILS = IRCO Loading System] [MUK = Multi | Universal | Short] Material diameter: 6 to 100 mm Material lengths: 1,200 / 1,600 mm *other lengths available upon request...

...These belt sanders operate without vibrations quick adjustment of vertical and horizontal position wide abrasive belt equipped with an adjustable stop for universal use quick tensioning device for the belt powerful 3 kW motor simple and quick change of the abrasive belt time-saving for deburring parts dimensions of abrasive belt: 220 x 2,000 mm belt speed: 29 m/s flat grinding table: 220 mm continuously motor power: 400 V / 50 Hz / 3 kW dimensions (L x W x H): 980 x 640 x 1,030 mm machine weight: 118 kg...

... rotatable oxy-fuel 3-burner unit (mechanical or fully automatic). Optional: Plasma rotary unit with CNC angle adjustment. Optional: Cutting / beveling / marking and drilling as a combined operation step. Optional: Extraction technology. Optional: Dry and water cutting tables. Optional: Programming stations including software, network connection, and DNC interfaces.

...Burner: PC S 25 x 4 m direct, workpiece cable, spare parts box Type: Plasma Cut 25 K Technical Data: Mains Voltage 1 x 230 V Fuse 16 A slow Air Pressure via built-in compressor Duty Cycle at max (10 min) 40°C 35% Adjustment Range 12 - 25 A Ignition Pilot ARC Nozzle Diameter 0.8 mm Protection Class IP 23 S Cooling Type AF Dimensions L x W x H 500 x 150 x 220 Weight 10 kg Cutting Capacity 6-10 mm...

... and the adjustment of the required cycle times are also part of our portfolio. The Alba service spectrum includes: - Vacuum, roller/brush crushers as standalone solutions or in combined designs, if necessary also multi-stage up to 3 levels - Established concepts with the highest operational reliability - Process solutions tailored to customer-specific annual quantities - Free choice of cycles and vacuum parameters - Integration into existing customer plant technology...

... same thickness. LED slit knife lighting. Bidirectional operation of the table is possible. Simplest slit knife adjustment. Type: Longitudinal and transverse cutting system Sheet width: 1,250 mm / 1,500 mm Capacity: 1.25 / 1.0 mm Shear: Roller shear (SLIT CUT) or guillotine shear (SLIT PRO) Control: Operation via ergonomic touch panel Roller feed funnel: Bearing rollers at the beginning of the table Table: Manually adjustable coil guide with ball bearings Slitting system: Shaft with a diameter of 100 mm, 5 manually adjustable steel knives, and manual cut gap adjustment...

...with ball bearing back roller, replaceable, particularly wear-resistant starting ring, side rollers with fine adjustment and continuous lubrication. Suitable for both metal and wood band saw machines. Side rollers are self-locking. Wear parts can be quickly replaced without disassembling the guide.

...The pneumatic cutting shears from P/A are designed for small cross-sections and high speeds. Cutting gap adjustment and spring-loaded hold-down for a clean cut of thin strips. Sturdy steel frame construction, column guides made of bronze bushings. Double-acting pneumatic cylinders with end-position damping. Fully piped, including silencer. Protective covers at the inlet and outlet. Strip inlet roller with strip edge guidance available as an option.

... grease pump is carried out pneumatically. Particular operational safety is ensured by the pneumatic adjustment of the scraper lid when the container is not emptied, preventing the lid from getting stuck. This ensures that no air pockets form in the container and that the grease pump does not draw in air. For plastic containers, a hold-down set can be ordered as an option.

...for drilling in plastic pipes with angle adjustment Machine Description – Machine stand made of robust, torsion-resistant steel construction – High core cutting speed for optimal cutting quality – Adjustable feed speed of the drilling device – Adjustable rotational speed – Manual clamping of workpieces with tension belts – Manual positioning of the drilling unit – Electric height adjustment of the drilling unit – Manual stepless angle adjustment of the core cutter – Control elements on the control panel of the switch cabinet Pipe diameter up to 1000 mm Drilling diameter 50 mm to 630 mm...

...Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended...

...The demand for a safe machine to section profiles longitudinally. Under these guidelines, Aimaqpro has developed the new TAS 4. With an innovative roller system that, while protecting the operator, guarantees optimal feeding, as it keeps the profile always in the same direction while performing the sectional cut. Adjustment of disc lift. Measuring system through mechanical indicator. Horizontal and vertical clamping kit. Disc cooling system with coolant blower. Input and output support path.

... capacity with low investment cost and long using life. - Automatic Double Head Pipe Bending Machine This model has automatic angle control, also it gives chance to sequently automatic multiple angle adjustment to have several bending angles. Distance adjustment between the bendings is also automatic on our this model. Tube Diameter Max.:38x2 mm Bending Angle Max.:185 ° Max. CLR.:200 mm Bending Bending Speed (°/sec):50 °...

...Due to its revolution speed and high performance this quality machine can be used diversely, e.g. with a collet for tools of 3–8 mm diameter. A very impressive machine that stands for endurance and strength whilst meeting all ergonomic and weight requirements. A version with a pair of supports for hard applications is also available. Operation:pneumatic Other characteristics:straight,ergonomic,rear exhaust...

...HEIDENHAIN position displays are used in a variety of applications. These include machine tools, feed axes such as those found in saws and presses, as well as measuring and testing devices, component parts, adjustment fixtures, and measuring stations in production control. To meet these requirements, the position displays can be combined with many measuring devices from HEIDENHAIN. In particular...

...Our rolling technology enhances the shaping possibilities for pipes with minimal tooling effort. All drives are designed to be servo-electric and can be CNC-controlled if needed. In our forming machines of type SRM, all adjustment parameters are stored, eliminating the need for complex adjustments. Various tool variations expand the processing options to include non-cutting separation or...

Duna Electronics, s.r.o. is one of the leading European wholesaler/distributor of brand new, original, sim free, never locked, European specific smartphones, tablets, accessories, audios, projectors, wearables, smart tools, cameras, drones, data storages, consumer electronics and IT devices. Our customer base are the biggest retail chain stores, offline and online retailers (B2C stores and websh...

...Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above). Power:6,4 / 5,0 kW Power supply:400 V Weight:210 kg table size:1223 mm / 850 mm / 850 tilting:90-45 Grad...

... of 6 bendings rolls •User friendly •Easy handling •Simple adjustment •Wide workpiece range •Innovative design •Angle scale included •Telescopic lever Configuration:handheld Operation:manual Product handled:steel tube Other characteristics:universal,compact...

... clamping device Clamping pressure reduction available as option Variable hydro-pneumatically / hydraulically controlled setting of the saw blade feed Easy miter cutting positioning with fixed stop Easy stroke adjustment of the saw unit via 2 clamping levers Well dimensioned worm gear unit with EISELE shock-absorbing feature Quick and easy blade change Type:stationary Technology:circular Treated material:for metals Applications:for profiles,for tubes Other characteristics:semi-automatic,vertical,hydraulic...

... precise and clean cuts even on high-density materials such as steel, aluminum, and metal alloys. Robustness and Durability: The machine's structure is made of reinforced steel, providing stability and wear resistance, even in the most demanding industrial environments. Application Versatility: Thanks to a continuous band blade and an angular adjustment system, this saw allows for linear, angled, and...