250BEL OPTIMA Manual vertical saw with retractable frame and recovery - Panel saws
250BEL OPTIMA Manual vertical saw with retractable frame and recovery - Panel saws

250BEL OPTIMA Manual vertical saw with retractable frame and recovery - Panel saws

Monoblock chassis made of welded steel 5.5 HP three-phase 400 V motor with electromagnetic brake 24 V low voltage control circuit Carbide blade 250/30 mm Blade rotation speed 5400 rpm Maximum cutting depth 60 mm Automatic retraction of panel support slats Retractable transport rollers with 3 control pedals Intermediate folding rail 3000 mm Repeatable cutting stop 400 mm 5 programming stops for horizontal cutting Optimized chip recovery system for chips released at the back of the panels, consisting of: 4 recovery chutes for each of the 4 vertical cutting points, connected to a collector integrated into the chassis 1 retractable lateral recovery chute for horizontal cuts 1 pneumatically controlled flap allows automatic opening of vertical chutes or the horizontal chute depending on the blade position 2 lateral chip outlets ø 100 mm for connection to an external suction unit
Similar products
1/15
300BEL OPTIMA Manual Vertical Saw with Retractable Frame - Panel Saws
300BEL OPTIMA Manual Vertical Saw with Retractable Frame - Panel Saws
Monobloc chassis made of welded steel 7.5 HP three-phase 400 V motor with electromagnetic brake 24 V low voltage control circuit Carbide blade 250/30 ...
FR-87270 Couzeix
250BEL Manual Vertical Saw with Retractable Frame - Panel Saws
250BEL Manual Vertical Saw with Retractable Frame - Panel Saws
Monobloc chassis made of welded steel 4 HP three-phase motor 400 V with electromagnetic brake 24 V low voltage control circuit Carbide blade 250/30 mm...
FR-87270 Couzeix
250BLX OPTIMA Automatic Group Moving Vertical Saw - Panel Saws
250BLX OPTIMA Automatic Group Moving Vertical Saw - Panel Saws
Monoblock chassis made of welded steel 5.5 HP three-phase 400 V motor with electromagnetic brake 24 V low voltage control circuit Carbide blade 250/30...
FR-87270 Couzeix
250BEL OPTIMA 4121 Reconditioned Vertical Panel Saws - Reconditioned Machines
250BEL OPTIMA 4121 Reconditioned Vertical Panel Saws - Reconditioned Machines
Monoblock welded steel chassis with high rigidity Overall height 2850 mm Overall length 5000 mm Overall width 1600 mm Retractable transport rollers wi...
FR-87270 Couzeix
250BL Manual Vertical Saw with Fixed Frame - Panel Saws
250BL Manual Vertical Saw with Fixed Frame - Panel Saws
Monoblock chassis made of welded steel 4 HP three-phase motor 400 V with electromagnetic brake Carbide blade 250/30 mm Blade rotation speed 5400 rpm M...
FR-87270 Couzeix
FIXED FM550 Vacuum Group - Panel Saws
FIXED FM550 Vacuum Group - Panel Saws
Built with modular panels made of galvanized steel, 2 to 3 mm thick. Dimensions 730 x 1620 mm height 6000 mm (big bag version) 18 filter sleeves Ø 200...
FR-87270 Couzeix
Groupe aspiration PJ200S - Panel Saws
Groupe aspiration PJ200S - Panel Saws
Installed power: 4 kW / 5.5 HP 2 poles Capacity 3600 m3/h Depression 2930 Pa Supply voltage: 230/400 V – 50 Hz CEE socket: 3Phs + T Noise: 74 dB(A) Sl...
FR-87270 Couzeix
MOBIL PJ400 Vacuum Group - Panel Saws
MOBIL PJ400 Vacuum Group - Panel Saws
Dimensions (L x W x H) 2445 x 1000 x 2360 mm Suction connection Ø 250 mm Air flow 4800 m³/h Pressure 2500 Pa Motor 5.5 Kw / 400 V / 50 Hz Noise level ...
FR-87270 Couzeix
DCI Precision Device for Angular Cuts - Panel Saws
DCI Precision Device for Angular Cuts - Panel Saws
The precision vernier is equipped with fixed angle indexing of 0°, +/-15°, +/-22.5°, +/-30°, and +/-45°. All intermediate angles between these previou...
FR-87270 Couzeix
RTK3000 Vertical storage rack for panels, with segmented roller ramps - Workshop equipment
RTK3000 Vertical storage rack for panels, with segmented roller ramps - Workshop equipment
6 storage compartments with a width of 400 mm and an interior height of 2095 mm, including one with 2 shelves for offcuts. 2 roller ramps with a cut s...
FR-87270 Couzeix
AL920 Tilt Glass Press for Aluminum Sliding Doors - Glass Presses & Tables
AL920 Tilt Glass Press for Aluminum Sliding Doors - Glass Presses & Tables
AL920B Pressing capacity 2500 x 2500 mm Maximum allowable load for tilting 150 kg Frame pressing by 4 cylinders Pressing force 400 kg Central turntabl...
FR-87270 Couzeix
PL970 Glazing and Control Press for Wood and PVC Frames - Glazing Presses & Tables
PL970 Glazing and Control Press for Wood and PVC Frames - Glazing Presses & Tables
1 manually retractable fixed beam and 1 manually movable beam • Pneumatic lift and lower of the mobile frame by 500 mm • Pneumatic clamping of the fra...
FR-87270 Couzeix
CR4 Unloading Trolley for Vertical Storage Rack - Workshop Equipment
CR4 Unloading Trolley for Vertical Storage Rack - Workshop Equipment
Permet le chargement des panneaux depuis le rack de stockage, leur transport et leur chargement sur la scie verticale, ceci par un seul opérateur. Les...
FR-87270 Couzeix
MPR Gantries Handling Gantries with Vacuum Lifter - Workshop Equipment
MPR Gantries Handling Gantries with Vacuum Lifter - Workshop Equipment
Ground-mounted handling set, including: • A steel supporting structure Vertical tubes and IPN crossbars Dimensions: Length 6000, 12000 or 18000 mm Wid...
FR-87270 Couzeix
PL972 Glazing and Control Press for Wood and PVC Frames - Glazing Presses & Tables
PL972 Glazing and Control Press for Wood and PVC Frames - Glazing Presses & Tables
1 fixed beam and 1 mobile beam with manual displacement • Individual pneumatic retraction of the beams in the plane of the mobile frame for parade wor...
FR-87270 Couzeix

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play