HSB 01 / V SP
HSB 01 / V SP

HSB 01 / V SP

The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once it has been reached – even over an unlimited period of time – despite the effect of a load torque. The brake is used solely to hold the load. It should only be noted that large transmission delays in the lines can cause time differences between the switching off of the swivel motor and the application of the released brake caused by spring force. In order to provide our customers with the right drive for all areas of application, the HSB swivel motor is available in a total of 5 different versions. We have listed the most important data below. You can find all further details in our data sheet. Specific torque [Nm/bar]:1,19 Operating pressure [bar]:200 Nominal torque [Nm]:238 Holding torque [Nm]:300 Swivelling angle [ degrees° ]:250 Shaft end: (P) toothed shaft (Z) keyway key:P
Similar products
1/15
HSB 03 / V SP
HSB 03 / V SP
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once...
DE-44807 Bochum
HSB 04 / V SZ
HSB 04 / V SZ
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once...
DE-44807 Bochum
HSB 02 / V SZ
HSB 02 / V SZ
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once...
DE-44807 Bochum
HSB 01 / V SZ
HSB 01 / V SZ
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once...
DE-44807 Bochum
HSB 03 / V SZ
HSB 03 / V SZ
The swivel motors with attached hydraulically released spring-applied multi-disc brake are recommended if a swivel position must remain unchanged once...
DE-44807 Bochum
HSL 02 SP
HSL 02 SP
The use of servo-hydraulic controls can significantly extend the range of applications for swivel motors. Larger loads can be slewed in a shorter time...
DE-44807 Bochum
HSL 03 SP
HSL 03 SP
The use of servo-hydraulic controls can significantly extend the range of applications for swivel motors. Larger loads can be slewed in a shorter time...
DE-44807 Bochum
HSG 02 SP
HSG 02 SP
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop ...
DE-44807 Bochum
HSE 02 SP
HSE 02 SP
The swivel motors of the HSE series also fulfill the function of end position damping with or without adjustable swivel angle limitation. This refers ...
DE-44807 Bochum
HSG 04 SP
HSG 04 SP
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop ...
DE-44807 Bochum
HSG 03 SP
HSG 03 SP
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop ...
DE-44807 Bochum
HSE 01 SP
HSE 01 SP
The swivel motors of the HSE series also fulfill the function of end position damping with or without adjustable swivel angle limitation. This refers ...
DE-44807 Bochum
HSE 03 SP
HSE 03 SP
The swivel motors of the HSE series also fulfill the function of end position damping with or without adjustable swivel angle limitation. This refers ...
DE-44807 Bochum
HSS 1 SG
HSS 1 SG
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial...
DE-44807 Bochum
HSS 8 SG
HSS 8 SG
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial...
DE-44807 Bochum

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play