Steel Wall Sleeve
Steel Wall Sleeve

Steel Wall Sleeve

Steel wall sleeves are typically installed in ceilings, walls, or floor slabs during the formwork process. They are designed to accommodate sealing inserts for pipe or cable penetrations. If the requirements regarding corrosion resistance are less stringent, wall sleeves are also used in galvanized or simpler black versions for cost reasons. To provide additional protection against potential liquid penetration (possibly due to future building settlement) caused by capillary action, wall sleeves are often equipped with a seamlessly welded flange ring.
Similar products
1/15
Lead Seals Delta® Seal
Lead Seals Delta® Seal
DELTA® SEAL is an inorganic, heavy metal-free coating. It prevents direct contact with the lead of the seal.
DE-65606 Villmar
Cold Shrink Tape Palimex Ktb 500
Cold Shrink Tape Palimex Ktb 500
Cold shrink bands are a simple solution for sealing during the installation of a new air duct system or for resealing an existing duct system. High-qu...
DE-65606 Villmar
K 30 – Fabric Adhesive Tape
K 30 – Fabric Adhesive Tape
The carrier is a PE-coated waterproof fabric, coated with an aggressive natural rubber adhesive that has particularly high and intense shear strength.
DE-65606 Villmar
Wall Sleeve Fz
Wall Sleeve Fz
The wall sleeve FZ is made from a special asbestos-free polymer-quartz sand-cement and is suitable for installation in walls and ceilings. The wall s...
DE-65606 Villmar
Pipe Clamps Sc
Pipe Clamps Sc
SC = Screw Connection Plumbing clamp for connection fittings to water and gas meters. The simple and quick solution. - Tool-free assembly - Cost-effe...
DE-65606 Villmar
Plastic Cable Duct
Plastic Cable Duct
Kettner TerraSafe is a modular plastic duct system. Various adapter plates allow for the implementation of a wide range of different sizes of the inco...
DE-65606 Villmar
Pipe Protection Fabric
Pipe Protection Fabric
PALIMEX Pipe Protection Fleece System for additional mechanical protection of steel and cast iron pipelines, plastic pipes, and plastic-coated pipe co...
DE-65606 Villmar
Sleeve Tg/mn
Sleeve Tg/mn
The TG/MN sleeve can be used where a pressure-tight seal is required and axial and radial movements need to be accommodated. Sealing Segment All seali...
DE-65606 Villmar
Kettseal 2in1
Kettseal 2in1
With the pull-tight seal kettseal 2in1, we offer a product that has significant advantages in terms of safety and efficiency compared to traditional s...
DE-65606 Villmar
Cable Protection Profile
Cable Protection Profile
It is applicable where pipes, cables, or channels intersect, are run very closely in parallel, or where there is a risk of force transmission due to s...
DE-65606 Villmar
Thermoduorit Novo Clic
Thermoduorit Novo Clic
provides ideal thermal shielding at intersections and parallel runs between PEHD gas pipes and electrical cables. The interlocking half-shell is easy ...
DE-65606 Villmar
K 80 – Aluminum Sealing Tape
K 80 – Aluminum Sealing Tape
The aluminum foil has a matte finish and closely resembles the surface of spiral duct pipes. The adhesive is made from butyl rubber with special resin...
DE-65606 Villmar
Closure Sleeve Red Heavy
Closure Sleeve Red Heavy
The sleeve offers an advantage wherever, in addition to the media pipe, several other protective pipes are routed through a casing pipe or where eccen...
DE-65606 Villmar
Ring Space Seals
Ring Space Seals
When pipes or cables pass through exterior walls, ceilings, or protective conduits, it must be ensured that the entry points are permanently sealed.
DE-65606 Villmar
Aluminum Measurement Post
Aluminum Measurement Post
Consistent alignment with customer needs was the objective in developing the aluminum measuring post. Theft-proof upper part A double-sided sliding u...
DE-65606 Villmar

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play