Sanaxil P - Therm : Potassium silicate paint, thermo-reflective with chemical adhesion

Sanaxil P - Therm Mineral paint for interiors and exteriors with potassium silicates, with strong adhesion characteristics on porous substrates, both for mineral combinations and for chemical bonds. It combines anti-condensation and insulating characteristics (thanks to the presence of 3M Glass Bubble hollow glass microspheres in the formulation) with strong resistance to mold and microorganisms (thanks to the natural alkaline pH of potassium silicate) and excellent hiding power (class 1 according to EN 13300 for a yield of 6/7 m2 / l). Sanaxil P - Therm due to its mineral nature, revolutionizes the concept of adhesion to the substrate, penetrating deeply into the porosity of the wall and then reacting with its components and forming a unique and indissoluble silicate bond. The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement. Protective, restorative coatings with strong antibacterial and anti-mold characteristics, based on stabilized potassium silicates, for vertical and horizontal surfaces. Heat reflective paint that helps to increase the thermal efficiency of the building. SUPPORTS ALREADY PAINTED WITH SILICATE PAINT Remove any stains and proceed with painting with the silicate paint. (it is always recommended to apply a coat of silicate impregnating agent). NEW SUPPORTS Apply a coat of potassium silicate fixative diluted from 30/40% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with potassium silicate impregnating agent diluted 30/40% with water depending on the absorption of the support. DILUTION (in volume with potable water) 1st COAT BRUSH: 15% one coat crossed or two coats 12-24 hours apart ROLLER: 10% SPRAY (with specific equipment): 15 - 25% 2nd COAT BRUSH: 10% ROLLER: 10% SPRAY (with specific equipment): 15 - 25%. Apply from 0.18 to 0.25 litres of Sanaxil P-THERM per square metre of surface to be painted. Pail 4 l - Pail 14 l