Продукти за тепровекс (6)

Unsere Kernkompetenz liegt in der Herstellung von Schmiedeteilen aus Stahl, Schmiedeteilen aus Edelstahl und Schmiedeteilen Aluminium in der Gewichtsklasse 0,1-6 kg.

Die Kanzlei nimmt die Aufträge für Russland. Pro für Mandanten: keine Einstellung, keine Arbeitserlaubnis-pflicht, sichere Bezahlung in Deutschland, anwaltliche Schweigepflicht, Berufshaftpflichtversicherung in Deutschland, Kommunikation in Deutsch.

Our measuring microscopes accommodate highquality optics in a robust lightmetal body. They are universally applicable, e.g. for testing hardness, evaluating Brinell and Vickers hardness, in graphics or for noncontact measurement of small parts and small distances. Our 20x/7 mm, 30x/5 mm, 40x/4 mm, 60x/2 mm and 100x/1 mm measuring microscopes feature batteryoperated LED illumination as standard.

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label