Продукти за rff hdl 10 a (23)

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Fullgear HYP Plus 85W-140W, is a automotive gear oil that is specially developed for axles and differentials of heavy duty vehicles where API GL-5/MT-1 and SAE J2369 performances are required. Its special formula provides effective wear protection under high speed and high load.

iglidur® J2 Environmentally friendly. The growing demand for PFOA-free iglidur® materials* is met by igus® with an ongoing review of all iglidur® materials – the list of already PFOA-free iglidur® materials is thus getting continuously longer – and a new iglidur® material: iglidur® J2. iglidur® J2 is available as cylindrical bearings and plain bearings with flange. Good mechanical properties, robust Low-priced Good resistance to media Lubricant- and mainteance-free

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) with solder stop mask Adaption board for approx. 40 different QFP-, SOP-, SSOP-, SDIP-casings: QFP- 0.80 mm Pitch: 44, 56, 64, 72, 80, 94, 100, 120-Pin QFP- 0.85 mm Pitch: 48, 54, 56, 64, 68, 80, 100-Pin QFP- 0.50 mm Pitch: 48, 64, 72, 80, 100, 120, 144, 160-Pin SOP- 1.27 mm Pitch: max. 44-Pin in 225, 300, 375, 450, 525, 600 mil. SOP- 1.00 mm Pitch: max. 36-Pin in 225, 300, 375 mil. SSOP- 0.80 mm Pitch: max. 42-Pin in 300, 450 mil. SSOP- 0.65 mm Pitch: max. 30-Pin in 225, 300 mil. SDIP- 1.778 mm Raster: max. 64-Pin in 300, 400, 500, 600, 750 mil. Size 100 x 160 mm

Der Premium-PU-Dichtstoff Eigenschaften: - Siliconfrei - Anstrichverträglich nach DIN 52452 (nicht überstreichbar) Keine Wechselwirkungen mit vorhandenen und angrenzenden Beschichtungen - Überstreichbar / Überlackierbar - bitte Anwendungshinweise im technischen Datenblatt beachten Optische Anpassungen und Schutzbeschichtung möglich - Gute Witterungs- und Alterungsbeständigkeit Für langlebige Anwendungen im Innen- und Außenbereich - Härtet blasenfrei aus Für optisch anspruchsvolle Fugen geeignet - Dehnspannungswert bei 100 % (ISO 37, S3A): 0,3 N/mm² Anwendungsgebiete: - Außenwandfugen nach DIN 18540-F - Dehnungs- und Anschlussfugen an Beton- und Porenbetonfertigteilen - Abdichten von Fassaden, Metallbaukonstruktionen, Fenster- und Türanschlüssen, Flachdachbrüstungen

LUBRIFIxx Schmierstoffgeber Laufzeit: 1 Monat

Esteröle sind chemische Verbindungen aus Kohlenstoff, Wasserstoff und Sauerstoff, die aus organischen Säuren (Carbonsäuren) und Alkoholen hergestellt werden. Durch gezielte Herstellungsverfahren können sie individuellen Schmierproblemen sehr gut angepasst werden. Vorteile unserer Ester-Öle sind ihre ausgezeichneten Schmiereigenschaften im breiten Temperaturspektrum von -35 °C bis +140 °C. Bei möglichen Problemen mit Dichtungsmaterialien oder Anstrichstoffen empfehlen wir den Einsatz unserer synthetischen Öle der Reihe ELKALUB LFC 9000. Verträglichkeit von Dichtungsmaterialien mit ELKALUB-Estern: Empfohlen: Fluorkohlenwasserstoff-Polymere, Fluorsilikonkautschuk, Nitrilkautschuk (> 30% Acrylnitril), Polyacrylatkautschuk, Polyurethan, Silikonkautschuk. Nicht empfohlen: Butylkautschuk, Äthylenpropylencopolymere, Äthylenpropylenterpolymere, Naturkautschuk, Nitrilkautschuk (< 30% Acrylnitril), Polychlorpren.

Der GUARD-F12 ist ein EN50155 Class Tx zertifizierte Firewall/Rouer für den Einsatz in Eisenbahn-Anwendungen. Das spezielle GUARD Gehäuse erlaubt den Einsatz in rauer Umgebung, ohne die Notwendigkeit von Lüftern oder Lüftungsöffnungen, und kann auf einer 35 mm DIN-Schiene, in einem Rack oder an der Wand montiert werden. Das kompakte Gehäuse bietet ausreichend Platz für zusätzliche Peripheriegeräte. Die Betriebstemperatur reicht von -20°C bis +60°C und optional sogar -40°C bis +85°C, ohne Lüfter oder zusätzliche Öffnungen. Der interne miniPCIe Slot ermöglicht verschiedene Erweiterungen wie WLAN, GPRS, usw.. Wichtige Eigenschaften sind: Grosser Eingangsspannungsbereich (8 - 36 VDC) 3 Fast-Ethernet-Ports mit M12-Steckern USB- und SD-Schnittstelle (optional) Optional mit 3 GigE Ports

Innovativ, modular, skalierbar: Die neue Generatorplattform von TRUMPF Hüttinger Die Generatoren der TruPlasma VHF Serie 3000 basieren auf einem innovativen Plattform-Konzept, das höchste Leistungsdichten ermöglicht und anspruchsvollste Prozessanforderungen erfüllt. Der modulare und rein wassergekühlte Aufbau ermöglicht eine Skalierung der Ausgangsleistung auf bis zu 80 kW. Darüber hinaus überzeugen die kompakten VHF-Generatoren durch hohe Wirtschaftlichkeit und ein robustes Design. Ausgangsfrequenz: 40.68 MHz

Flexible single-component mortar that protects and waterproofs all types of construction surfaces, concrete or mortar in the presence of water or humidity. Its flexibility allows it to cover microcracks that form in concrete subjected to deformation. Strong adhesion, impermeability, no shrinkage and excellent workability. Maximum thickness per layer:1mm Minimum total thickness:2mm Consumption:1.25 kg/m2 and mm thickness

Superfine talc, manufactured and developed specifically for the nucleation of polymers. The presence of a large amount of fine particles improves the crystallization of the resin, thereby greatly improving the bending modulus, HDT (temperature resistance - ISO 75-1) and transparency.

HF LONG RANGE LESER, PREMIUM • 180 x 320 x 110mm (LxBxH) • Mögliche Antennen Konfigurationen: - ID ISC.ANT310/310 Loop Antenna - ID ISC.ANT800/600-DA Loop Antenna • Schnittstellen: RS232, RS485, USB 2.0, Ethernet (TCP/IP), USB-Port für WLAN-Stick oder externen Speicher • Spannungsversorgung: 24 V DC • Transponder: ISO15693, ISO18000-3-Mode1 • Einsatzbeispiele: - Identifizierung von Akten und Dokumenten - Handel; Identifizierung von Verleihgütern - Verleihsysteme; Bibliotheken - Industrie • Besondere Merkmale: - Antikollision Funktion - FEIG ISO Host Mode - Buffered Read Mode (BRM) - Notification Mode - Scan Mode

The performance of a true cure, hardener and densifier in a single application.

15,6" MultiTouch Monitor Panel für Pulteinbau von vorne Versorgung, IPC: IPC

OEM Spare Parts for Concrete Pumps

Tissu 100% LIN, arm ure reps 2/1, 520g/m2, 150cm, NonIm per Principales utilisations:baches, bagagerie, maroquinerie

F30 Fluor Powder Cod. Art:F30 Ean Code:8022937433470 Temperatura aria:-2C°... -7C° Umidità aria:H° > 50% Tipo di neve:neve artificiale, neve in trasformazione Umidità neve:umida Applicazione:applicare a caldo T° ferro 170C°

Ce produit a été retiré de notre gamme. Liste

Universelle Achsregelbaugruppe (Positionsregelung und Druckregelung) mit Feldbus IO-Ankopplung und SSI-Sensorschnittstelle, erhältlich mit EtherCAT-, Profinet- oder Profibus-Anbindung

Il s'agit d'un conglomérat d'agrégats de marbre concassés, d'agrégats légers et de ciment, ensachés à l'état sec afin que l'utilisateur, en le mélangeant avec l'eau indiquée, obtienne un béton de faible densité de qualité adéquate et constante. Résistance à la compression:>20 N/mm2 Densité de la poudre:1300 Kg/m2 Densité apparente:1600 Kg/m2 Consistance du béton frais - tassement:60-90 mm Taille maximale des granulats:10 mm

Very pure talc with a high degree of whiteness and brightness. It has a high layering and very fine grinding. Recommended for polypropylene automotive exteriors, bumpers and dashboards. This talc is also used as a nucleating agent in semi-crystalline polymers

Pentra-Sil® (244+) is a premium hardener, densifier and sealer with hydrophobic properties ideal for protecting concrete and masonry surfaces against the damage of wind-driven rain, freeze-thaw, moisture, and chloride ion intrusion. Pentra-Sil® (244+) combines the benefits of lithium silicate densification with reactive silicone chemistry to meet the NCHRP 244 standard for chloride protection of concrete in a single application. The reactive treatment reduces permeability, helps prevent efflorescence leaching and provides chloride ion resistance to deter reinforcing steel corrosion and spalling. When sprayed on new or existing concrete, it penetrates where it reacts with free calcium to form insoluble calcium silica hydrate, which makes concrete more water, stain, and abrasion resistant for easier maintenance and longer life.

Mortier flexible monocomposant qui protège et imperméabilise tous types de surfaces de construction, béton ou mortier en présence d'eau ou d'humidité. Sa flexibilité lui permet de couvrir les microfissures qui se forment dans le béton soumis à la déformation. Forte adhérence, imperméabilité, aucun retrait et excellente maniabilité. Épaisseur maximale par couche:1mm Épaisseur totale minimale:2mm Consommation:1,25 kg/m2 et mm d'épaisseur