Продукти за o365 поток (5)

For sliding properties improvement of machine parts, apparates and precision machinery, e.g. under the influence of oxygen, in vacuum or radioactive radiation Dry lubrication for tools or workpieces in cold- and thermoforming For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulfuric- and nitric acidFor best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Apply on small parts in series production by tumbling, under addition of small amounts powder and tumbling Operating temperature:-185 °C → +450 °C Press-fit:µ = 0.04, no chatter Particle size:16.0 - 30.0 µm, max. 190 µm

Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface Density: (20 °C):0.66 g/ml

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants. Operating temperature:-25 °C → +125 °C Press-fit:µ = 0.14, no chatter Four-ball test rig (welding load):5,000 N Thread friction (M10/8,8):µ total = 0.09

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication of friction, rolling and pivoting bearings, splined shafts, knockout spindles and sliding surfaces of all kinds under normal loads and all sliding speeds common for grease lubrication Supports sealing of bearings and corrosion protection Advantages and benefits Highly effective due to optimum combination of components Good resistance to pressure and water Fewer downtimes and repairs as a result of reduced wearing Resistant to ageing and oxidationFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Operating temperature:-30 °C → +120 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):110 mm²/s Four-ball test rig (welding load):2,000 N