Продукти за h05vv f 4g2 5 (7)

Kit for Nissan 380 3.8 V6 &nbsp; Tipo:simple COD:3201A000 Breve descrizione:<b> Ø 95.50</b> Stato delle imposte:taxable Aliquota di imposta:iva-22 Prezzo di listino:2040 Categorie:CAR Tag:Nissan Classe di spedizione:Kit pistoni da 4 a 6 pz Posizione:345 Cylinder Bore:95.50 valuta(e)| visibile 1 | globale 1 N. Cyl.:6 valuta(e) | visibile 1 | globale 1 C.H.:27.70 valuta(e) | visibile 1 | globale 1 Con-Rod Housing:22.50 valuta(e) | visibile 1 | globale 1 Pin Bore:22.00 valuta(e) | visibile 1 | globale 1 Dome /Dish cc's:6.90 cc valuta(e) | visibile 1 | globale 0 Complete Piston Weight gr.(± 5 ):444 g valuta(e) | visibile 1 | globale 0

Silicone hollow chamber seal with self-adhesive spine, transparent-Oddy tested - FE-03TK silicone hollow chamber seal transparent - silicone hollow chamber seal with self-adhesive back, transparent - joint width 4 to 6 mm - dimensions W = 7 mm, H = 6 mm - emission-free and Oddy tested - 60 Shore A

YEARLY SUBSCRIPTION Receive monthly updates on your VT56 TPMS tool with the annual software subscription including the latest and greatest features and coverage. The latest software update subscription also includes new tool functionalities, procedures, corrections, vehicle coverage, sensor coverage and more. New vehicle and OE/Aftermarket sensor coverage added each month Access to new features & functions Subscribe to receive a tech release email for each release Update the tool as many times as needed with the annual subscription PN:SW56-0001

High-performance superplasticizer for medium slump and high slump concrete with good slump retention for precast and ready-mix concrete. Very strong increase of workability and/or reduction of w/c-ratio; good slump etention; high early strength development.

La gaine SER-4 est une formulation à base de polyoléfine hautes performances, d’usage général avec une bonne tenue aux fluides et solvants courants. Convenant pour une large gamme d’utilisations, cette gaine peut être utilisée pour l’isolation, le câblage, la protection mécanique ou l’identification dans la plupart des applications industrielles ou militaires. Grâce à son rétreint élevé de 4:1, elle peut permettre de couvrir une gamme étendue de diamètres avec un nombre limité de tailles. Rétreint:4:1 Température d’utilisation:-55°C à 135°C Température de rétreint:> 90°C Normes:ROHS, UL224, CSA Autoextinguible:Oui Type:SER-4

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz. Product Series Code TCXO:EMF576D VCTCXO: VEMF576D Frequency Range:12.0MHz to 800.0MHz Output Waveform:LVDS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:(Partial list) 12.8, 16.0 19.44, 20.0, 25.0, 27.0, 30.0, 32.0 Frequency Stability (see table) vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change Supply Voltage:+3.3 Volts Differential Output Voltage VOD:247mV min., 355mV typical; 454mV max., Output 1 - Output 2 Differential Output Error dVOD:-50mV min., 50mV max. Output Offset Voltage VOS:1.125V min., 1.200V typ., 1.375V max Offset Magnitude Error dVOS:0mV min., 3.0mV typ., 25mV max Rise and Fall Times:1.5ns typical Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Current Consumption:12MHz to 24MHz: <33mA max., 24MHz to 96MHz: <50mA max., 96MHz to 800MHz:<85mA max Output Load:50W from each load Drive Capability:100W between LVDS and Complementary LVDS Storage Temperature:-55° to +125°C Phase Jitter (RMS) (12kHz to 20MHz):0.4ps typ., 0.5ps max

High-performance superplasticizer for medium slump and high slump concrete with good slump retention and very high early strength for precast application. Very strong increase of workability and/or reduction of w/c-ratio; very strong plasticizing effect even with high amounts of fines; high increase of early strength.