Продукти за arik 21 agric kft (9)

With the help of the belts rotating on two rollers, it takes the seeds from inside the warehouse and leaves them inside the outer casings on the line opened by the ax. The axes that open the line are connected to the unit. The units have a parallelogram system. (For SC1 model) It works according to the low-height situation of the field. There is a gear option to adjust the seed spacing on the row. (It can be adjusted as 4-6cm, 6-8cm, 8-10cm.) The seed tank can be tilted forward and backward with the help of the piston. The benefit of this system is that while planting small seeds, the tank is tilted back to prevent too much seeding. In large seeds, the seed is prevented from falling over the scoop (spoon) by tilting it forward. 750:kg

Der Qualitätsmaßstab verfügt über Präzisionsfedern aus gehärtetem Stahl. Dies sichert eine verschleißfreie und dauerhafte Federung. Das Gelenk bleibt immer leichtgängig und exakt arretierbar. Durch die geringe Durchneigung der stabilen Glieder und das geringe Gewicht der Präzisionsfedern eignet er sich hervorragend für Hochmessungen. Der Nietkopf (Drehpunkt) der durch gehenden Nieten dreht auf einer Kunststoff scheibe, dadurch ist die Gelenkverbindung zusammen mit der gehärteten Feder auf Dauerbelastung ausgelegt. Die Maßstabglieder sind ohne seitliche Einfräsungen, deshalb kann eine gerade Anreißlinie gezogen werden. Die enganliegenden Glieder ermöglichen einen filigranen Werbedruck auf der gesamten Hochseitenfläche. Holzgliedermaßstab 2 m 10 Glieder Gelenke mit innenliegenden gehärteten Stahlfedern Glieder ca. 3,4 x 16 mm 100 Stück ca. 10,9 kg brutto.

Cultivators with spring tines are used to loosen, crush and mix the surface layer of the soil. They can be used to pull out weeds and cultivate stubble. The aggregate with a string roller can be used for pre-sowing crops for cereals, maize or potatoes.

System measuring the lateral distribution of Rauch Landmaschinen fertilizer disc spreaders

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

• Die Festdünger-Verteilungsanhänger vom Typ Panther Garden von Agromeks sind effektive landwirtschaftliche Geräte, die eine gleichmäßige Verteilung tierischer Festdünger auf landwirtschaftlichen Flächen gewährleisten. • Unsere Modelle mit 4 m³ und 6 m³ Kapazität bieten eine große Auswahl an Ladekapazitäten von 5 Tonnen und 7 Tonnen. • Das einachsige Tandem-Scherensystem zeichnet sich durch sein spezielles Design aus und bietet hervorragende Kraftstoffeffizienz und einfachen Einsatz auch bei Traktoren mit geringer Leistung. • Dank der einstellbaren Streukapazität zwischen 1 und 8 Metern ermöglicht es eine schnelle und effektive Düngerverteilung auf großen Flächen. • Das speziell gepolsterte Schaftsystem, bei dem die Sicherheit der Maschine im Vordergrund steht, sorgt für einen langlebigen Betrieb, indem es das Hängenbleiben von Steinen und ähnlichen Gegenständen verhindert. • Unser Produkt ist mit einem hydraulischen Bremssystem ausgestattet, das vom Traktor aus geschmiert wird. Kapazität m3:5 m3 Kapazität tonne:7 tonne Gülleausbringungsbreite:5 - 15 m Mindestleistung des Traktors:55 ps Zapfwellendrehzahl:540 Achstyp:einzeln Länge:606 cm Breite:210 cm Höhe:230 cm Gewicht:2940 kg Arbeitsgeschwindigkeit:4-5 kmh

YGK Antitarnish NFM - YGK Anti-tarnish Application:Copper / Brass Properties:Complexing agent- and chromium-free concentrate, manyfold applications

With the help of the belts rotating on two rollers, it takes the seeds from inside the warehouse and leaves them inside the outer casings on the line opened by the ax. The axes that open the line are connected to the unit. The units have a parallelogram system. (For SC1 model) It works according to the low-height situation of the field. There is a gear option to adjust the seed spacing on the row. (It can be adjusted as 4-6cm, 6-8cm, 8-10cm.) The seed tank can be tilted forward and backward with the help of the piston. The benefit of this system is that while planting small seeds, the tank is tilted back to prevent too much seeding. In large seeds, the seed is prevented from falling over the scoop (spoon) by tilting it forward. Seeds Planted: Minced garlic, onion shallots, tulip bulbs

With the help of the belts rotating on two rollers, it takes the seeds from inside the warehouse and leaves them inside the outer casings on the line opened by the ax. The axes that open the line are connected to the unit. The units have a parallelogram system. (For SC1 model) It works according to the low-height situation of the field. There is a gear option to adjust the seed spacing on the row. (It can be adjusted as 4-6cm, 6-8cm, 8-10cm.) The seed tank can be tilted forward and backward with the help of the piston. The benefit of this system is that while planting small seeds, the tank is tilted back to prevent too much seeding. In large seeds, the seed is prevented from falling over the scoop (spoon) by tilting it forward. Seeds Planted: Minced garlic, onion shallots, tulip bulbs