Продукти за arcair copperclad (5)

Less disruption and damage to surfaces worth conserving (road surface, water courses, railway embankments etc.) and minimal restoration – giving economic advantages Low social impact because, diversions, half-sided barriers, traffic signal facilities etc. are avoided Acknowlegded pipe installation technique Short setting-up times - short installation times The dynamic impact when ramming can shatter obstacles and easily overcome difficult starting resistance after standstill periods. The aiming accuracy is improved because the dynamic impact penetrates various soil formations within the diameter range and obstacles do not have to be displaced or pushed aside in one piece No jacking abutment, no auger cutter required, which could get jammed The soil core remains in the pipe during ramming, i.e. no rush of water when rivers or areas with a high water table are undercrossed Minimal ground covering, i. e. no large-scale pits Simple operating technique Adaptation to all pipe diameters with

Cora®Jet is a water jet bonded polyester fleece. It is characterized by a very uniform fibre structure. The large material thickness also supports the deposition of the particles in the depth of the filter medium. Weight range:40 – 100 g/m2 Thickness:0.4 – 1.1 mm Production width:2,400 m Composition:Various polyester fibres, mechanical bonded

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free

CARBOPAL, Pulverkohle zur Behandlung von Flüssigkeiten, ist in den folgenden Qualitäten erhältlich: • Carbopal MB 4 • Carbopal MB 4N • Carbopal MB 4S • Carbopal AP • Carbopal Gn-A II • Carbopal Gn-P

CoCrWMo-Aufbrennlegierung für konventionelle, hochschmelzende (niedrig expandierende) Keramiken. Frei von Nickel, Beryllium und Cadmium. Typ 5 nach DIN EN ISO 22674. Vorteile für den Zahntechniker: -Breites Indikationsspektrum -Sehr gute Legierungseigenschaften ermöglichen ein systemfreies Arbeiten -Hervorragende Poliereigenschaften und angenehmes Ausarbeiten, unter anderem durch niedrigen Härtegrad von 280 HV10 -Ein WAK von 14,0 gewährt Flexibilität bei der Keramikauswahl und sicheres Verblenden -Je nach Keramik ist keine Abkühlphase notwendig -Exzellenter Metall-Keramikverbund, auch ohne Bonder -Auf ein Oxidationsbrand kann verzichtet werden -Optimale Vorraussetzungen für das Laserschweißen -Flexibilität in der Anwendung und leichtes Aufschmelzen, kein Funkensprühen Gewicht: 1000 g