Продукти за aiumprofil 80x80 (9)

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Alumero Zaunfeld inkl. 370W bifaziales PV-Modul TRANSPARENT (1914 mm x 1188 mm) Alumero Zaunfeld inkl. 370W bifaziales PV-Modul FULLBLACK (1914 mm x 1188 mm)

Sosyal yaşantımızın mekansal sınırlayıcısı mimari yapıların tasarımında kullanılan, estetik, şık görünümlü, pürüzsüz, çağdaş bir yapı malzemesidir. Oldukça geniş bir kullanım alanı olan Naturalbond, renk çeşidi ve bütünlüğü, hava etkilerine dayanımı, kolay şekil verilebilirliği, ısı ve ses tutucu özelliği sayesinde diğer yapı malzemelerine göre daha üstündür. Aynı zamanda çevre dostu olan Naturalbond, mukavim yapısı sayesinde diğer yapı malzemelerine oranla daha geniş açıklıklarda rahatça kullanılabilmektedir. Düşük maliyetle yüksek verim avantajı, Naturalbond’u vazgeçilmez kılmaktadır.

Référence MATE450-1M2

Aero Panel G model features Panel filters in Glassfiber media. They are available in 25mm, 50mm and 90mm thicknesses and in various models depending upon application. It is a right choice and economical pre filter for Fan Coil Units & Packaged Units as pre filtersand as disposable pre filters in AHUs and Gas Turbine applications.

Iso Brandschutzelemente mit Stahlblechschalen und einem Dämmkern aus Mineralwolle Baustoffklasse A1 – nicht brennbar. Einsatz als Brandschutzwand max. F120 AB oder zur Schalldämmung ca. 32 dB. Die Oberfläche der Stahlblechschalen ist in unterschiedlichen Farben, Oberflächendesign und Beschichtungssystemen lieferbar.

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Référence MATE450-5M2

Référence MATE600-10M2