Продукти за aiumprofil 80 x 80 (10)

SANDING FFP 0320Flat foam pad - 150 x 150mm - Primer prep FFP 0500Flat foam pad - 150 x 150mm - Base coat prep FFP 0800Flat foam pad - 150 x 150mm - Clear coat prep FFP 1500Flat foam pad - 150 x 150mm - Clear coat fade

Plaque de coupe A2 600 x 450 mm Réf:APQ020061

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

DÉFINITION TECHNIQUE Sous-couche prêt à l’emploi en phase aqueuse à appliquer sur tous fonds humides en intérieur et extérieur afin de les rendre aptes à recevoir tous types de produits : enduit de rebouchage, de dégrossissage ou de lissage, enduit ciment. ANTI-HUMIDITÉ permet le traitement des murs humides et protège contre l’humidité venant de l’intérieur et de l’extérieur. COMPOSITION ET ASPECT Résine en émulsion à haute résistance à l’eau, carbonate de calcium, agent de rhéologie et divers adjuvants. La pâte est de consistance liquide et de couleur blanche. REVÊTEMENTS • Papier peint • Peinture • Revêtement mural • Tous types d’enduits. CONDITIONNEMENTS Seaux de 1,5 et 5 kg sur palette houssée. SUPPORTS ADMIS Murs et plafonds en intérieur : • Plaques de plâtre • Béton cellulaire • Panneaux de particules • Briques • Vieux badigeons • Bois Murs extérieur : • Agglos • Ciment • Béton cellulaire. CARACTÉRISTIQUES TECHNIQUES • Densité de la pâte : 1,5 • Extrait sec :...

DIM Ltd. - PACIFIC Furniture Equipment Products Floor Protectors Eva Floor Protector Pads 120X240mm Color chart 120x240mm Material: Eva Thickness: 2,5mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

Der neuartige Kulissentyp AKUSCLEAN® wurde speziell für den Einsatz in Groß-und Industrieküchen entwickelt. Mit vollflächig glatter und flüssigkeitsdichter Oberfläche. Der neuartige Kulissentyp AKUSCLEAN® wurde speziell für den Einsatz in Groß-und Industrieküchen entwickelt. Küchenabluft enthält Fettartikel, die auch durch Fettfilter nicht vollständig abgeschieden werden. Bei ungeschützten, offenporigen Absorptionsmaterialien ist es unvermeidlich, daß feinste Fettpartikel in das Absorptionsmaterial eindringen. Ausführung: Kulissentyp C Wirksam nach dem Folien-Resonanzprinzip Gehäuse aus verzinktem Stahlblech mit Rahmen aus Leichtprofil. Die Kulisse besteht aus zwei unterschiedlichen Sektionen. AKUSCLEAN® Schalldämpfer sind RAL-geprüft. Die Kulissen besitzen die Typbezeichnung C100 und sind ausschließlich in der Kulissendicke 100 mm erhältlich

Schneidunterlage PLP Menge/Format: 1 Unterlage 1.450 mm x 1.150 mm Stärke: ca. 2.5 mm Farbe: Schwarz Artikel-Nr:50310001 Hersteller:Diverse

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.

Schneidunterlage PLP Menge/Format: 6 Unterlagen à 940 mm x 1100 mm Farbe: Schwarz - Stärke: ca. 2.5 mm Farbe: Golf - Stärke: ca. 2.75 mm Artikel-Nr:50310074 Hersteller:Diverse Hersteller-Nr:3912164