Продукти за тепровокс (18)

YGK Chrome 98 - YGK Chrome Application:Decorative and functional application in automotive and sanitary field Function:Best corrosion protection for nickel-plated layers, liquid catalyst, simple handling

Battery Cycle Count A typical cell phone battery goes through approximately 500 cycles before retaining at least 80% of its original capacity. Made from new materials, our batteries have zero cycles, ensuring the maximum number of cycles you can use. Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Months Warranty

Pipette Tip 50-1000 PP (blue)

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

Machine Parkour

Roulettes pivotantes à oeil roue jante polyamide bandage caoutchouc gris non tachant. Supports acier embouti zingué. Du diamètre 80 au au 200 mm De 50 Kgs à 205 Kgs de charge utile.

item number : 192312 Description : Cady ice cream container with capacity 5000 ml. - 342 x 151 x 131 mm. Size : 342 x 151 x 131 mm. Contents : 5.000 ml. Material : PP Weight : gram Inmould label (IML) : Nee Packaging Pieces per box : 450 Dozen per pallet : 2 Pallets per palletplaats

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul

Technologie : LEDs Weatherproof sonore Options : Dragonne et clip-ceinture Fonctions : 1 bouton : clignotante (1) Fonction fixe (2) Torche en bout de bâton (3) / 1 bouton : sirène 120 dB Dimensions : 37 cm dont 20 cm de partie lumineuse Diamètre : 30 mm Poids : 285 gr Alimentation : 3 piles LR03 UGS:701110 Alimentation:Piles Couleur:Vert Dimensions:37cm Type de bâtons:Bâton lumineux

Micro Tube SafeFit, 5.0 ml with Cap

Test Tube, Screw Cap, 20/76 mm, Round Bottom, Standing Rim

Tongue Depressor 150 mm, Polystyrene

Cotton Applicator 150 mm PP, Small Head

Stirring Spatula 120 mm, Polystyrene

Pipette Tip 0,1 - 20 PP (crystal)

Urine Cup 100 ml with Screw Cap, irradiated

Cotton Applicator 150 mm Alu, Mini Head, sterile individually

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label